Sulfonation of metallocene‐based polyolefinic elastomers and its influence on physicomechanical properties: Effect of reaction parameters,styrene grafting,and pendant chain length

Direct sulfonation and styrene‐mediated sulfonation were carried out onto metallocene‐based poly(ethylene‐co‐octene) (POE) and poly(ethylene‐co‐butene) (PBE) elastomers to impart polarity on the completely nonpolar rubbery matrices and to prepare a new class of elastomer. The influence of styrene‐grafting and pendant chain length on the degree of sulfonation was also studied. The effects of sulfonation, styrene grafting and styrene‐mediated sulfonation at their optimized levels on various physicomechanical properties were thoroughly investigated, and the resultant properties were correlated with structures of the modified elastomers. Higher extent of sulfonic acid groups were introduced through direct sulfonation in comparison with the styrene‐mediated sulfonation, whereas better thermal and mechanical properties were obtained through styrene‐mediated sulfonation in comparison with the direct sulfonation process. PBE had shown higher degree of sulfonation and percentage grafting than POE. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8023–8040, 2008     

Spin-orbit gauge and quantum spin Hall effect

We have shown that the non-Abelian spin-orbit gauge field strength of the Rashba and Dresselhaus interactions, when split into two Abelian field strengths, the Hamiltonian of the system can be re-expressed as a Landau level problem with a particular relation between the two coupling parameters. The quantum levels are created with up and down spins with opposite chirality and leads to the quantum spin Hall effect.     

Synthesis,structure and antibacterial activity of manganese(III) complexes of a Schiff base derived from furfurylamine

Two new mononuclear complexes of manganese(III) viz. [MnL₂(LH)₂]ClO₄ (1) and [MnL₂(N₃)]·0.5CH₃OH (2) have been synthesized by reacting manganese perchlorate with furfurylamine and salicylaldehyde (plus sodium azide in 2) where L = (2-hydroxybenzyl-2-furylmethyl)imine, an asymmetric bidentate Schiff base formed in situ to bind the Mn(III) ion. The complexes have been characterized by elemental analysis, IR spectroscopy, TGA and single crystal X-ray diffraction studies. Structural studies reveal that the complexes 1 and 2 adopt an octahedral and a square pyramidal geometry, respectively. The antibacterial activity of the complexes has been tested against Gram(+) and Gram(?) bacteria.     

A reflection-type oil-film skin-friction meter

Tanner has shown analytically that the slope characteristics of a thin oil-film lying in contact with a surface on which an aerodynamic boundary-layer is developing are explicitly related to the local skin-friction. Unlike many conventional methods of measuring skin-friction, the oil-film method is absolute in nature, requires no calibration and in principle, can be universally applied. In all existing forms of the meter, however, interferometry is used to make measurements of the oil film. In the present contribution, the technique has been simplified by completely eliminating interferometry. This has been achieved by making direct and dynamic measurements of the oil-film slope by directing a reflected beam of light off the top of the oil film to a small position sensing photodiode. The raw data now is very different from that in the interferometric method and consequently, new methods of determining skin-friction from measured oil-film slope histories have been developed. The reflection method has been verified in incompressible flat plate turbulent boundary-layers. The standard of deviation of the measurements is about 10% of the mean. The present version of the meter is compact and simple.     

Pattern formation in a complex plasma in high magnetic fields

Low-pressure room-temperature neon, argon, krypton, and air plasmas were studied in magnetic fields up to flux densities of 2.3 T. Filaments appeared parallel to the magnetic field lines, and patterns such as spirals and concentric circles formed in the perpendicular direction. We link these effects to the magnetization of the ions. We also used a layer of embedded microparticles as probes in the plasma. Their motion changed dramatically from a collective rotation of the whole ensemble in moderate magnetic fields to a rotation in several small vortices centered at the filaments.     

Characteristics of electrochemically grown dendritic metallic zinc

A simple electrochemical process has been implemented to fabricated fractal structured leaf-like metallic zinc. The fabricated material was structurally characterized using X-ray diffraction that reveals the hexagonal unit cell structure. Also the growth of the structure is anisotropic. Field emission scanning electron microscopic images revealed clearly the leaf-like morphology of the fabricated material is fern like and ∼500 μm in length, ∼50-60 μm wide and the platelets thickness is ∼5 μm. The growth of this structure is diffusion controlled and locally accomplished with the oriented attachment. Raman shift measurement revealed the existence of surface optical phonon modes which is very significant for surface defects.     

Experimental studies of the jamming behaviour of triblock copolymer solutions and triblock copolymer-anionic surfactant mixtures

Photon correlation spectroscopy and rheological measurements are performed to investigate the microscopic dynamics and mechanical responses of aqueous solutions of triblock copolymers and aqueous mixtures of triblock copolymers and anionic surfactants. Increasing the concentration of triblock copolymers results in a sharp increase in the magnitude of the complex moduli characterising the samples. This is understood in terms of the changes in the aggregation and packing behaviours of the copolymers and the constraints imposed upon their dynamics due to increased close packing. The addition of suitable quantities of an anionic surfactant to a strongly elastic copolymer solution results in a decrease in the complex moduli of the samples by several decades. It is argued that the shape anisotropy and size polydispersity of the micelles comprising mixtures cause dramatic changes in the packing behaviour, resulting in sample unjamming and the observed decrease in complex moduli. Finally, a phase diagram is constructed in the temperature-surfactant concentration plane to summarise the jamming-unjamming behaviour of aggregates constituting triblock copolymer-anionic surfactant mixtures.     

Solubility of carbon dioxide in aqueous solution of 2-amino-2-methyl-1-propanol and piperazine

In this work, new experimental results of the vapour-liquid equilibrium (VLE) of CO₂ in aqueous 2-amino-2-methyl-1-propanol (AMP) and piperazine (PZ) have been presented in the temperature range of 298-328 K and PZ concentration range of 2-8 mass%, keeping the total amine concentration in the solution at 30 mass%. The partial pressures of CO₂ were in the range of 0.1-1450 kPa. A thermodynamic model was developed to correlate and predict the VLE of CO₂ in aqueous AMP + PZ. The electrolyte nonrandom two liquid (ENRTL) theory has been used to develop the VLE model for the quaternary system (CO₂ + AMP + PZ + H₂O) to describe the equilibrium behaviour of the solution. The experimental data from this work and data available in the literature were used to regress the ENRTL interaction parameters. The model predictions are in good agreement with the experimental data of CO₂ solubility in aqueous blends of this work as well as those reported in the literature. The current model can also predict speciation, heat of absorption, pH of the CO₂ loaded solution, and amine volatility.     

Instabilities in free-surface electroosmotic flows

Instability of a thin electrolyte film undergoing a direct current electroosmotic flow has been investigated. The film with a compliant electrolyte–air interface is flowing over a rigid charged substrate. Unlike previous studies, inclusion of the Maxwell stresses in the formulation shows the presence of a new finite wavenumber shear-flow mode of instability, alongside the more frequently observed long-wave interfacial mode. The shear mode is found to be the dominant mode of instability when the electrolyte–solid and electrolyte–air interfaces are of opposite charge or of same charge but have very large zeta-potential at the electrolyte–air interface. The conditions for mode-switch (interfacial to shear) and the direction of the travelling waves are discussed through stability diagrams. Interestingly, the analysis shows that when the interfaces are of nearly same zeta potential, the ‘free’ electrolyte–air interface behaves more like a ‘stationary’ wall because of the ion transport in the reverse direction of the flow.