Structural and phase characteristics of the diamond/matrix interfacial zone in high-resistant diamond composites

The structural-phase state of the contact zone and the factors that influence on the strength of diamond retention in the diamond carbide composites were determined. Composites were obtained by the new hybrid technology that eliminates the reheating of the metalized coating. The elaborated technology combines the thermal diffusion metallization of a diamond and the sintering by the scheme of self-dosed impregnation in a one-stage technological cycle. By the methods of electron microscopy, X-ray diffraction analysis, and Raman spectroscopy the structural and phase characteristics of the interphase boundary were investigated. The improvement of chemical and mechanical adhesion between the diamond and carbide matrix was obtained. It was shown that the specific productivity of the samples with a metalized diamond component is 39% higher than those without metallization.     

Inter-laboratory exercise with an aim to compare methods for 90Sr and 239,240Pu determination in environmental soil samples

In order to deliver reliable results for a multitude of different scenarios, e.g. emergency preparedness, environmental monitoring, nuclear decommissioning and waste management, there is a constant process of method development in the field of radioanalytical chemistry. This work presents the results of a method comparison exercise aimed at quantifying ⁹⁰Sr and ^239,240Pu in environmental soil samples, with the intention of evaluating the performance and applicability of different methods. From the methods examined in this work, recommendations are given in order to find a radioanalytical measurement procedure, for ⁹⁰Sr and ^239,240Pu analysis, which is fit-for-purpose for a particular scenario.

     

Polyethylene Glycols as Solvents for Anionic Activation: Synthesis of Thioacetates by Means of Potassium Thioacetate in Polyethylene Glycol 400

Recently, polyethylene glycols (PEGS) of various molecular weights have been proposed as solvent promoters for various reactions ^{1, 2}. We wish to report on the use of PEG 400 as solvent for the anionic activation of potassium thioacetate, which could be used for the preparation of alkyl and benzyl thioacetates from the corresponding halides or alcohol derivatives. The method can be synthetically significant, since from thioacetates the corresponding thiols can be easily prepared under a variety of mild conditions ³.     

Preparation of Some Substituted Terephthalic Acids

We report in detail the preparation of two substituted terephthalic acids: 2‐sulfomethylterephthalic acid (1) and 2‐phosphonoterephthalic acid (2). Efficient, short syntheses have been developed for both compounds. They are potentially useful monomers for construction of acid‐pendant polymer chains.     

Isolation and Characterization of Cellulosic Pulp Fines and Their Interactions with Cationic Polyacrylamides

Four different types of cellulosic fines were isolated from refiner mechanical and kraft pulp samples to characterize their chemical and physical properties. The pulp fines were flocculated using four different types of cationically modified polyacrylamides. The extent of flocculation was observed with multiple light scattering apparatus. The maximum adsorption of the polyelectrolytes on the pulp fines was determined by polyelectrolyte titration. It was concluded that it is the combination of the molar mass and the charge density of a polyelectrolyte, as well as the origins and characteristics of the fines which define the adsorption and flocculation behavior. None of these properties alone could fully describe these phenomena, but the molar mass of the polyelectrolyte was the predominant factor. The most important fines characteristics were the charge properties and the microstructure.     

Comparison of phantom materials for use in quality assurance of microbeam radiation therapy

Microbeam radiation therapy (MRT) is a promising radiotherapy modality that uses arrays of spatially fractionated micrometre‐sized beams of synchrotron radiation to irradiate tumours. Routine dosimetry quality assurance (QA) prior to treatment is necessary to identify any changes in beam condition from the treatment plan, and is undertaken using solid homogeneous phantoms. Solid phantoms are designed for, and routinely used in, megavoltage X‐ray beam radiation therapy. These solid phantoms are not necessarily designed to be water‐equivalent at low X‐ray energies, and therefore may not be suitable for MRT QA. This work quantitatively determines the most appropriate solid phantom to use in dosimetric MRT QA. Simulated dose profiles of various phantom materials were compared with those calculated in water under the same conditions. The phantoms under consideration were RMI457 Solid Water (Gammex‐RMI, Middleton, WI, USA), Plastic Water (CIRS, Norfolk, VA, USA), Plastic Water DT (CIRS, Norfolk, VA, USA), PAGAT (CIRS, Norfolk, VA, USA), RW3 Solid Phantom (PTW Freiburg, Freiburg, Germany), PMMA, Virtual Water (Med‐Cal, Verona, WI, USA) and Perspex. RMI457 Solid Water and Virtual Water were found to be the best approximations for water in MRT dosimetry (within ±3% deviation in peak and 6% in valley). RW3 and Plastic Water DT approximate the relative dose distribution in water (within ±3% deviation in the peak and 5% in the valley). PAGAT, PMMA, Perspex and Plastic Water are not recommended to be used as phantoms for MRT QA, due to dosimetric discrepancies greater than 5%.     

Generic-Type Results for Chaotic Dynamics in Equations with Periodic Forcing Terms

We prove that a class of equations containing the classical periodically forced pendulum problem displays the main features of chaotic dynamics for a set of forcing terms open and dense in suitable spaces. The approach is based on global variational methods.     

The first kinetic evidence for acid catalysis in a monocyclic rearrangement of heterocycles: conversion of the Z-phenylhydrazone of 5-amino-3-benzoyl-1,2,4-oxadiazole into N,5-diphenyl-2H-1,2,3-triazol-4-ylurea

The title reaction has been studied in dioxane/water in a large (0.1-14.9) pS+ range, evidencing, together with an uncatalyzed process at intermediate (3.5-8.0) pS+ values, the occurrence of a catalyzed pathway both in the acidic (pS+ 0.1-3.5) and in the basic region (pS+ 8.0-14.9): specific-acid catalysis and general-base catalysis, respectively, have been found to take place by means of kinetic investigations at different buffer concentrations. Mechanisms for the three pathways have been advanced on the grounds of structural features. In a comparison with previous data particular attention has been paid to the acid-catalyzed pathway, herein observed for the first time in an azole-to-azole interconversion. The mechanistic hypotheses seem well supported by ab initio calculations.     

TS-1 zeolite microengineered reactors for 1-pentene epoxidation

A zeolite-based microengineered reactor was fabricated and tested for 1-pentene epoxidation over titanium silicalite-1 (TS-1) catalyst, which has been selectively incorporated within the microreactor channel using a new synthesis procedure.