Enantioselective synthesis of (+)-gossonorol and related systems using organozinc reagents

The sesquiterpene (+)-gossonorol is prepared in only three synthetic steps in 60% overall yield and 82% ee from commercially available reagents. The key asymmetric step is the catalytic enantioselective addition of dimethylzinc to 5-methyl-1-(2-methylphenyl)hex-4-en-1-one catalyzed by chiral isoborneolsulfonamide ligands in the presence of titanium tetraisopropoxide. The modular approach allows the synthesis not only of the aforementioned natural product but also other products arising from the corresponding processes of ethylation, phenylation, and ethynylation, just by changing the final nucleophilic reagent and using the same isoborneol type ligand.     

Determination Of Formaldehyde And Acetaldehyde Associated To Atmospheric Aerosols By HPLC

Abstract

A rapid new analytical protocol was developed for the determination of formaldehyde and acetaldehyde associated to atmospheric particulate matter, at ng/m³ levels. The aerosols were collected on glass fiber filters (8″×10″) at face velocities ranging from 15 m/min to 23 m/min. Aliquots of 15.4 cm² were sonicated, for 20 min, with 5.0 mL of 0,01% 2,4-dinitrophenylhydrazine (DNPH), 1 % phosphoric acid. The liquid phase was then filtered and the separation and quantification of the corresponding 2,4-dinitrophenylhidrazone (DNPHo) derivatives carried out by reverse phase HPLC. Acetonitrile:water (57:43, v/v) as mobile phase at 1.0 mL/min and absorbance detection at 350 nm and 365 nm for, respectively, formaldehyde-DNPHo (0.04 AUFS) and acetaldehyde-DNPHo (0.01 AUFS) were used. The precision for four different aliquots, from a 8″×10″ glass fiber filter, were under 0.04% for formaldehyde and 14.16 % for acetaldehyde. In Salvador, Bahia, Brazil, formaldehyde and acetaldehyde were determined, respectively, in the range of 6.8 ng/m³ to 27.3 ng/m³ and 9.1 ng/m³ to 54.6 ng/m³.     

Unsupervised learning of pharmacokinetic responses

Pharmacokinetics (PK) is a branch of pharmacology dedicated to the study of the time course of drug concentrations, from absorption to excretion from the body. PK dynamic models are often based on homogeneous, multi-compartment assumptions, which allow to identify the PK parameters and further predict the time evolution of drug concentration for a given subject. One key characteristic of these time series is their high variability among patients, which may hamper their correct stratification. In the present work, we address this variability by estimating the PK parameters and simultaneously clustering the corresponding subjects using the time series. We propose an expectation maximization algorithm that clusters subjects based on their PK drug responses, in an unsupervised way, collapsing clusters that are closer than a given threshold. Experimental results show that the proposed algorithm converges fast and leads to meaningful results in synthetic and real scenarios.     

Mass‐Spectrometric Observation of Counter Anion Production in SU‐8 Exposed to UV Light and its Use for Dill C Parameter Determination

Photopolymerization is a phenomenon that is the basis of much of today's microfabrication technology and intense research is conducted to improve its control and the characteristics of end products for a variety of applications. The design of microscopic structures often relies on the accurate knowledge and modeling of photopolymer's behavior upon exposure, i.e. the Dill parameters, for each radiation species of interest and therefore the development of flexible characterization techniques is of great importance. SU‐8 is a popular compound that is representative of a whole class that relies on cationic polymerization, where an acid is obtained via photolysis of an onium salt during exposure. Here we report on the observation of SbF₆^? via laser desorption mass spectrometry on SU‐8 exposed to UV light at the wavelength of 365 nm and demonstrate that the yield of this counter‐anion as a function of exposure is consistent with the Dill C parameter value available in the literature. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 967–972     

Development and validation of a RP-HPLC method for Roflumilast and its degradation products

Roflumilast is a phosphodiesterase type 4 inhibitor that is administered orally as a long-term, in the clinical treatment of chronic obstructive pulmonary disease and asthma. Launched in 2010 for the European market, it currently does not have an official monograph. Here, a reproducible gradient RP-HPLC method was developed and validated for the separation and determination of Roflumilast in the presence of its six major degradation products. Separation was performed on a C₁₈ analytical column (250?×?4.6?mm, 5?µm) with a mobile phase-A of ACN and a phase-B of ammonium acetate buffer (5?mM, pH 4.2) containing triethylamine (0.5% v/v). The most effective RP-HPLC gradient program was determined to be 0/80, 35/10, 36/80, 40/80 (time in minutes/% mobile phase-B). The flow rate was 1.0?ml/min and the column temperature was 25°C. The success of separation of the degradation products with different chemical characteristics was obtained by extending the time of the gradient, changing the proportion of the mobile phases and increasing the velocity of the flow. Two detectors were evaluated for the identification of degradation products and Roflumilast: a diode-arrary detector and a charged aerosol detector. The inability of the charged aerosol detector to dectect one of the six degradation products indicated that the method developed with RP-HPLC and the diode-array detector was more suitable for Roflumilast analysis. The method was validated according to specificity, linearity, LOD, LOQ, accuracy, precision and robustness.     

Novel Copolymer of Diisopropyl Fumarate and Benzyl Acrylate Synthesized Under Microwave Energy and Quasielastic Light Scattering Measurements

Microwave assisted free radical copolymerization of diisopropyl fumarate (DIPF) and benzyl acrylate (BzA) with different copolymer compositions was performed using benzoyl peroxide as initiator. The effect of the reaction conditions on the macromolecular characteristics, monomer reactivity ratio and copolymer properties were studied. The monomer conversion and average molecular weights increase with the content of BzA units in the copolymer. The copolymers were characterized by IR, ¹H and ¹³C-NMR spectroscopies and the molecular weights were analyzed with size exclusion chromatography (SEC). The reactivity ratios obtained from an extended Kelen-Tüdös method under microwave irradiations are a factor which is double than those obtained by thermal copolymerization. The product r₁r₂ = 0.152 suggests a preference of both propagating macroradicals toward consecutive homopolymerization. The hydrodynamic and polydispersity size were measured in ethylacetate, tetrahydrofuran and methylethylketone with a quasi-elastic light scattering (QELS) technique showing that the quality of the solvents increases in the order: EA < THF < MEK.     

Pyrolysis study of hydrophobic tholins By TG-MS, TG, DTA and DSC methods

This study presents the thermogravimetry (TG) of hydrophobic tholins, obtained from different simulation experiments of prebiotic synthesis carried out in a CH₄/N₂/H₂ atmosphere with spark discharge activation of aqueous aerosols and liquid water. Differential thermal analysis and differential scanning calorimetry were also used to evaluate the thermal behaviour of these complex organic compounds that could play an important role in prebiotic chemistry. A coupled thermogravimetry-mass spectrometry system allowed us to analyse the principal volatile thermal decomposition and fragmentation products of the hydrophobic tholins under dynamic conditions and an inert atmosphere. During their thermal degradation, which occurs in two stages, a wide variety of hydrocarbon products including methane, vinyl monomers (such as ethylene and propylene), acetylene, oligomers, and some other unknown compounds are found. Besides, a thermally stable structure is present (graphitic structure) in these particular organic substances. Finally, data collected from TG experiments in an oxidative atmosphere showed significant differences at temperatures above 240 °C. According to these results, the different techniques of thermal analysis here applied have proved to be an adequate methodology for the study and characterization of these complex systems, structures of which remain controversial even in these days.     

Disposable amperometric magnetoimmunosensor for the sensitive detection of the cardiac biomarker amino-terminal pro-B-type natriuretic peptide in human serum

A novel amperometric magnetoimmunosensor using an indirect competitive format is developed for the sensitive detection of the amino-terminal pro-B-type natriuretic peptide (NT-proBNP). The immunosensor design involves the covalent immobilization of the antigen onto carboxylic-modified magnetic beads (HOOC-MBs) activated with N-(3-dimethylaminopropyl)-N′-ethylcarbodiimide (EDC) and N-hydroxysulfosuccinimide (sulfo-NHS), and further incubation in a mixture solution containing variable concentrations of the antigen and a fixed concentration of an HRP-labeled detection antibody. Accordingly, the target NT-proBNP in the sample and that immobilized on the MBs compete for binding to a fixed amount of the specific HRP-labeled secondary antibody. The immunoconjugate-bearing MBs are captured by a magnet placed under the surface of a disposable gold screen-printed electrode (Au/SPE). The amperometric responses measured at –0.10 V (vs. a Ag pseudo-reference electrode), upon addition of 3,3′,5,5′-tetramethylbenzidine (TMB) as electron transfer mediator and H₂O₂ as the enzyme substrate, are used to monitor the affinity reaction. The developed magnetoimmunosensor provides attractive analytical characteristics in 10-times diluted human serum samples, exhibiting a linear range of clinical usefulness (0.12–42.9 ng mL⁻¹) and a detection limit of 0.02 ng mL⁻¹, which can be used in clinical diagnosis of chronic heart failure in the elderly and for classifying patients at risk of death after heart transplantation. The magnetoimmunosensor was successfully applied to the analysis of spiked human serum samples.