Dendritic analogues of engineering plastics - a general one-step synthesis of dendritic polyaryl ethers

The first general single-step route to dendritic or cascade polyaryl ethers analogous to common linear polyaryl ethers is described. The sodium salts of four AB₂ monomers each containing a single phenolic hydroxyl group and two aryl fluorides activated toward nucleophilic substitution by carbonyl, sulphonyl, or tetrafluorophenyl moieties are shown to polymerize in hot N, N-dimethylacetamide. The products are high molecular weight polymers (7000 < M_n < 36000), have narrow polydispersities (1.50 < M_w/M_n < 4.50), and are highly soluble in organic solvents. The molecular weights of two of the polymers increase with monomer concentration. The polymers are thermally stable (500 °C under N₂) and have glass transition temperatures ranging from 135 to 231 °C.     

Comparative Hydrodynamic Study on Non-Aqueous Soluble Archaeological Wood Consolidants: Butvar B-98 and PDMS-OH Siloxanes

Butvar B-98 and PDMS-OH both have a demonstrable ability as consolidants for archaeological wood. This makes them both potential treatment options for the Oseberg collection, which is one of the most important archaeological finds from the Viking era. Both Butvar B-98 and PDMS-OH are soluble in organic solvents, offering a useful alternative to aqueous-based consolidants. Extensive characterisation studies were carried out on both of these polymers, with the use of analytical ultracentrifugation and viscometry, for the benefit of conservators wanting to know more about the physical properties of these materials. Short column sedimentation equilibrium analysis using SEDFIT-MSTAR revealed a weight-average molar mass (weight-average molecular weight) M_w of (54.0 ± 1.5) kDa (kg · mol⁻¹) for Butvar B-98, while four samples of PDMS-OH siloxanes (each with a different molar mass) had an M_w of (52.5 ± 3.0) kDa, (38.8 ± 1.5) kDa, (6.2 ± 0.7) kDa and (1.6 ± 0.1) kDa. Sedimentation velocity confirmed that all polymers were heterogeneous, with a wide range of molar masses. All molecular species showed considerable conformational asymmetry from measurements of intrinsic viscosity, which would facilitate networking interactions as consolidants. It is anticipated that the accumulated data on these two consolidants will enable conservators to make a more informed decision when it comes to choosing which treatment to administer to archaeological artefacts.     

Tame combing and almost convexity conditions

We give the first examples of groups which admit a tame combing with linear radial tameness function with respect to any choice of finite presentation, but which are not minimally almost convex on a standard generating set. Namely, we explicitly construct such combings for Thompson??s group F and the Baumslag?CSolitar groups BS(1, p) with p ??? 3. In order to make this construction for Thompson??s group F, we significantly expand the understanding of the Cayley complex of this group with respect to the standard finite presentation. In particular we describe a quasigeodesic set of normal forms and combinatorially classify the arrangements of 2-cells adjacent to edges that do not lie on normal form paths.     

Inclusive Science Education: Classroom Teacher and Science Educator Experiences in CLASS Workshops

Inclusion is the meaningful participation of students with disabilities in general education classrooms. The CLASS project (Creating Laboratory Access for Science Students) is a unique initiative offering training and resources to help educators provide students with a variety of physical, sensory and learning disabilities equal access in the science laboratory or field. To determine whether participants believed a 2‐week residential workshop sponsored by CLASS raised disability awareness and provided teacher training in inclusive science teaching practice, a multipoint Likert scale survey and questionnaire was completed by all participants (N= 20) in four workshops. Participants reported large gains in their preparedness to teach science to students with disabilities. Participants also reported gains in their familiarity with instructional strategies, curricula, and resources and their ability to design, select, and modify activities for students with disabilities. Finally, shifts in attitudes about teaching science to students with disabilities were noted.     

Raman spectroscopic characterization of the magnesium content in amorphous calcium carbonates

A series of Mg‐bearing synthetic amorphous calcium carbonates (ACC) were characterized by Raman spectroscopy. The spectra showed a systematic increase in the carbonate ν₁ peak position from the control samples that contained 0.0 mol % MgCO₃ to samples that contained up to 43 mol % MgCO₃. The relationship is best described by the function: mol % MgCO₃ = (ν₁ – 1079.66) / 0.2017. The Mg content is equally well‐predicted by a correlation with the instrumentally corrected ν₁ full width at half maximum that is quantified by: mol % MgCO₃ = (ν₁ – 23.26) / 0.1969. An analysis of the Raman data collected for ACC combined with insights from crystalline materials suggests that compositional dependencies arise from changes in the local metal–oxygen bonds as Mg substitutes for Ca. The calibrations described here provide a rapid and nondestructive means of determining the Mg content of ACC, with additional advantages of minimal sample preparation and a high degree of lateral spatial resolution (approximately 1 µm). This method may be appropriate for investigations of heterogeneous samples such as biominerals. Copyright © 2011 John Wiley & Sons, Ltd.     

Particle size distributions of silver nanoparticles at environmentally relevant conditions

Silver nanoparticles (Ag NPs) are becoming increasingly popular as antimicrobial agents in consumer goods with consequent risk to environmental health from discharges. Environmentally relevant fate and transport investigations are limited but essential to gain understanding towards bioavailability and toxicology. In this study, monodisperse 15 nm citrate-stabilised Ag NPs were synthesised, characterised and then fractionated by flow field-flow fractionation (FlFFF) at environmentally relevant conditions (pH 5 or 8, presence of natural organic macromolecules (NOM) and presence of sodium or calcium). At low ionic strength, Ag NPs particle size increased as pH increased from 5 to 8. However, changing the ionic strength from 10⁻³ to 10⁻² M Na increased instability of the Ag NPs, and loss of peak at pH 5 but in the presence of humic substance (HS), a reduction in NP size was seen, most likely due to a reduction in the diffuse layer. The presence of Ca²⁺ ions, at the higher ionic strengths caused complete loss of the solution Ag NPs with or without HS, most likely due to aggregation. At the lower Ca²⁺ ionic strength the Ag NPs were still unstable, but again, in the presence of HS the NPs were largely dispersed. The presence of HS improved stability of Ag NPs under these conditions by forming a surface coating resulting in both steric and charge stabilisation. This work implies that Ag NPs could have long residence times in aquatic systems in the presence of HS potentially resulting in increased bioavailability.     

Substituent electronic effects in chiral ligands for asymmetric catalysis

The majority of reports of ligand modification for catalysis have followed from systematic variation of the spatial demands of the catalyst. The focus of this review is to highlight selected major contributions to the area of substituent controlled electronic-tuning of some well known chiral ligands and the subsequent effect of these changes during asymmetric catalysis. The ligand types discussed include the salens, phosphites and phosphoramidites, ferrocene-containing ligands, oxazolines and axially chiral ligands. For each ligand type we attempt analyse the effect of systematic variation of electronics and note whether any improvements in catalyst activity and selectivity are obtained.     

Underpotential surface reduction of mesoporous CeO<Subscript>2</Subscript> nanoparticle films

The formation of variable-thickness CeO₂ nanoparticle mesoporous films from a colloidal nanoparticle solution (approximately 1–3-nm-diameter CeO₂) is demonstrated using a layer-by-layer deposition process with small organic binder molecules such as cyclohexanehexacarboxylate and phytate. Film growth is characterised by scanning and transmission electron microscopies, X-ray scattering and quartz crystal microbalance techniques. The surface electrochemistry of CeO₂ films before and after calcination at 500 °C in air is investigated. A well-defined Ce(IV/III) redox process confined to the oxide surface is observed. Beyond a threshold potential, a new phosphate phase, presumably CePO₄, is formed during electrochemical reduction of CeO₂ in aqueous phosphate buffer solution. The voltammetric signal is sensitive to (1) thermal pre-treatment, (2) film thickness, (3) phosphate concentration and (4) pH. The reversible ‘underpotential reduction’ of CeO₂ is demonstrated at potentials positive of the threshold. A transition occurs from the reversible ‘underpotential region’ in which no phosphate phase is formed to the irreversible ‘overpotential region’ in which the formation of the cerium(III) phosphate phase is observed. The experimental results are rationalised based on surface reactivity and nucleation effects.     

Applications of chiral C3-symmetric molecules

Throughout history symmetry and chirality have inspired artists and scientists alike. Given that rotational axes are the only elements of symmetry compatible with chirality, it is not surprising that C2- and C3-symmetrical molecules have attracted considerable attention. In recent years, the aesthetic appeal of C2-symmetrical molecules has been translated into many widely-used applications some of which are of commercial importance by its exploitation in the area of asymmetric catalysis. In contrast, exploitation of the arguably greater aesthetic appeal of C3-symmetric molecules is still in its infancy. This review, which surveys the applications of chiral C3-symmetrical molecules in the areas of asymmetric catalysis, molecular recognition and nanoarchitecture, has been designed with a view to identifying some of the most promising areas of application of these very beautiful molecules.