Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads

Effects of High Temperature Storage (HTS) and bonding toward microstructure change of intermetallic compound (IMC) at the wire bonding interface of 3 types of bond pad (Al, AlSiCu and NiPdAu) were presented in this paper. Optical and electron microscope analyses revealed that the IMC growth rate of samples under 175 and 200 °C HTS increased in the order of Al > AlSiCu > NiPdAu. Besides, higher HTS and bonding temperatures also promoted higher IMC thickness. The compositional study showed that higher HTS and bonding temperature developed rapid interdiffusion in bonding interface. In the mechanical ball shear test, a decrease of the shear force of Al and AlSiCu bond pads after 500 h HTS was believed due to poorly developed IMC at bonding interface. On the other hand, shear force degradation at 1000 h was due to excessive growth of IMC that in turn causes the formation of defects. For NiPdAu bond pad, increasing trend of shear force with HTS duration at 175 °C implied a good reliability of the Cu wire bonding. The rapid microscopic inspection on Cu wired Al bond pad under HTS 175 °C showed the IMC development from the periphery to the center of the ball bond. However, after 500 h voids started to develop until the crack was observed at 1000 h.     

Synthesis and characterization of chemically anchored adenosine with PHEMA grafted gold nanoparticles

The synthesis of chemically anchored adenosine with biocompatible poly(2-hydroxylethyl methacrylate) grafted gold nanoparticles (Ado-i-PHEMA-g-AuNPs) was realized by employing a simple strategy. Disulfide-containing poly(2-hydroxylethyl methacrylate) (DT-PHEMA) was initially synthesized by atom transfer radical polymerization (ATRP). The formation of DT-PHEMA was confirmed by ¹H-NMR and FT-IR. The molecular weight and molecular weight distribution were found to be 9.6 kg/mol and 1.40 from GPC analysis. DT-PHEMA was subsequently used for the synthesis of PHEMA-g-AuNPs by a grafting to protocol. The grafting of DT-PHEMA on the surface of AuNPs was confirmed by FT-IR, TGA, XPS, and EDX analyses. The particle size of the PHEMA-g-AuNPs was found to be ca. 5.0 nm from HR-TEM analysis. Boronic acid was used for functionalization of PHEMA-g-AuNPs, which was then subjected for covalent immobilization with adenosine via strong interaction between free hydroxyl groups of adenosine and boronic acid. Characterization and properties of the Ado-i-PHEMA-g-AuNPs were investigated by taking advantage from FT-IR, XPS, EDX, and UV-visible spectroscopy. The Ado-i-PHEMA-g-AuNPs nanocomposite exhibits a surface plasmon resonance peak at 586 nm which is red shifted from AuNPs (521 nm), indicating significant changes of surface property upon PHEMA-adenosine immobilization onto the surface of AuNPs.     

Anode spot plasma deposition of insulating layers on aluminum

The deposition of an insulating layer upon an aluminum plate in an argon plasma is described. The process is effected in a low-power DC discharge to which a small amount of sulfur hexafluoride (SF₆) has been added, causing the formation of anode spots at sharp metallic surfaces. The insulator is deposited in the region beneath the spot     

Terahertz imaging through self-mixing in a quantum cascade laser

We demonstrate terahertz (THz) frequency imaging using a single quantum cascade laser (QCL) device for both generation and sensing of THz radiation. Detection is achieved by utilizing the effect of self-mixing in the THz QCL, and, specifically, by monitoring perturbations to the voltage across the QCL, induced by light reflected from an external object back into the laser cavity. Self-mixing imaging offers high sensitivity, a potentially fast response, and a simple, compact optical design, and we show that it can be used to obtain high-resolution reflection images of exemplar structures.     

Dark matter results from 100 live days of XENON100 data

We present results from the direct search for dark matter with the XENON100 detector, installed underground at the Laboratori Nazionali del Gran Sasso of INFN, Italy. XENON100 is a two-phase time-projection chamber with a 62 kg liquid xenon target. Interaction vertex reconstruction in three dimensions with millimeter precision allows the selection of only the innermost 48 kg as the ultralow background fiducial target. In 100.9 live days of data, acquired between January and June 2010, no evidence for dark matter is found. Three candidate events were observed in the signal region with an expected background of (1.8 ± 0.6) events. This leads to the most stringent limit on dark matter interactions today, excluding spin-independent elastic weakly interacting massive particle (WIMP) nucleon scattering cross sections above 7.0 × 10(-45) cm(2) for a WIMP mass of 50 GeV/c(2) at 90% confidence level.     

Seedlayer interface enhanced magnetic anisotropy in CoPt (0 0 0 2)-textured films

The effects of interface roughness of Ta seedlayer on the structural and magnetic properties of Co₇₂Pt₂₈(20 nm)/Ru(30 nm)/Pt(2 nm)/Ta(5 nm)/glass were investigated. Uniaxial perpendicular magnetic anisotropy (8.6×10⁶ ergs/cc), coercivity (5.5 kOe) and nucleation field (−2.8 kOe) in the Co₇₂Pt₂₈ thin film sputter-deposited on relatively smooth surface of Ta seedlayer were achieved. The results showed that relatively smoother interface roughness of Ta seedlayer improved the CoPt/Ru (0 0 0 2) texture and magnetic properties.     

Synthesis of ZnO nanospheres with uniform nanopores by a hydrothermal process

ZnO nanospheres were successfully synthesized by a hydrothermal process (S1 sample) and a wet-chemical method (S2 sample). Following synthesis, calcination treatment at 450 °C was performed for the sample prepared by the wet-chemical method (S3 sample). All of the samples possessed a regular spherical shape. A polycrystalline wurtzite structure was confirmed in the S1 and S3 samples by X-ray diffraction and selected area electron diffraction, whereas a mixture of ZnO nanoparticles and amorphous materials was observed in the sample S2. The surface area and pore structure of the samples were investigated by nitrogen adsorption–desorption measurements. Uniform nanopores with a diameter of 4.07 nm were present in the S1 sample while a broad pore size distribution was obtained for the S2 and S3 samples. The highest surface area was obtained for the S1 sample and a possible formation mechanism was studied.