Tailoring of nanoscale porosity in carbide-derived carbons for hydrogen storage

The poor performance of hydrogen storage materials continues to hinder development of fuel cell-powered automobiles. Nanoscale carbons, in particular (activated carbon, exfoliated graphite, fullerenes, nanotubes, nanofibers, and nanohorns), have not fulfilled their initial promise. Here we show that carbon materials can be rationally designed for H2 storage. Carbide-derived carbons (CDC), a largely unknown class of porous carbons, are produced by high-temperature chlorination of carbides. Metals and metalloids are removed as chlorides, leaving behind a collapsed noncrystalline carbon with up to 80% open pore volume. The detailed nature of the porosity-average size and size distribution, shape, and total specific surface area (SSA)-can be tuned with high sensitivity by selection of precursor carbide (composition, lattice type) and chlorination temperature. The optimum temperature is bounded from below by thermodynamics and kinetics of chlorination reactions and from above by graphitization, which decreases SSA and introduces H2-sorbing surfaces with binding energies too low to be useful. Intuitively, pores of different size and shape should not contribute equally to hydrogen storage. By correlating pore properties with 77 K H2 isotherms from a wide variety of CDCs, we experimentally confirm that gravimetric hydrogen storage capacity normalized to total pore volume is optimized in materials with primarily micropores ( approximately 1 nm) rather than mesopores. Thus, in agreement with theoretical predictions, a narrow size distribution of small pores is desirable for storing hydrogen, while large pores merely degrade the volumetric storage capacity.     

Comparison of the radiopharmaceutical potentials of dithizone radiolabeled with 131I and with 99mTc

In this study, dithizone (diphenylthiocarbazone) has been separately radiolabeled with ¹³¹I and with ^99mTc for preliminarily testing their radiopharmaceutical potentials on male albino rabbits. ¹³¹I-dithizone and ^99mTc-dithizone were intravenously injected to rabbits via their ear veins after anesthetizing with a mixture of Alfazyne and Alfamine (Serva) to determine their dynamic and static statuses in the metabolism. Also, ^99mTc as pertechnetate and ¹³¹I as iodate were administered to rabbits as controls. Dynamic and static scintigrams were obtained using a gamma camera (Diacan Instruments). Dynamic scintigrams were obtained over the first half hour with frames of 1 minute following the administrations of the labeled compounds. Static images were obtained from posterior projection at different time intervals up to about 3 hours following the administration of the radiolabeled compounds. ^99mTc-dithizone was significantly uptaken by the pancreas in contrast to free ^99mTc. In the case of ¹³¹I-dithizone, the distribution of ¹³¹I activity in the metabolism was clearly different than the case of free ¹³¹I and the uptake of ¹³¹I-dithizone at the pancreas zone was also significant. These preliminary tests have clearly indicated that especially ^99mTc-dithizone has a significant potential to be used as a pancreatic radiopharmaceutical.     

Arylthio analogs of 5,8-quinolinedione: Synthesis,characterization, antibacterial,and antifungal evaluations

Abstract

A set of bis(arylthio) substituted 5,8-quinolinedione derivatives were synthesized and investigated for their in vitro antimicrobial effect. The antibacterial and antifungal activities of 6,7-bis(arylthio)-5,8-quinolinedione (4a–f) and 6,7-bis(arylthio)-2-methyl-5,8-quinolinedione (5a–f) were evaluated against four gram-negative bacteria, three gram-positive bacteria, and three fungi strains. The bis(methoxyarylthio) 5,8-quinolinedione analogs presented better activity against especially gram-positive bacteria compared to bis(halogenarylthio) 5,8-quinolinedione analogs. Bis(3-methoxyarylthio) 5,8-quinolinedione (4e) had the same activity of the reference drug against Staphylococcus aureus. Bis(2-methoxyarylthio) 5,8-quinolinedione (4f) showed two-and-a half-fold better activity with 89.69?μM against Enterococcus faecalis, and two-fold better activity with 11.20?μM against Staphylococcus epidermidis. Bis(2-methoxyarylthio)-2-methyl-5,8-quinolinedione 5f exhibited five-fold higher antibacterial activity with 43.44?μM against E. faecalis and also eight-fold activity of the reference drug with 2.71?μM against S. epidermidis.     

Double frictional receding contact problem for an orthotropic layer loaded by normal and tangential forces

With the increasing research in the field of contact mechanics, different types of contact models have been investigated by many researchers by employing various complex material models. To ascertain the orthotropy effect and modeling parameters on a receding contact model, the double frictional receding contact problem for an orthotropic bilayer loaded by a cylindrical punch is taken into account in this study. Assuming plane strain sliding conditions, the governing equations are found analytically using Fourier integral transformation technique. Then, the resulting singular integral equations are solved numerically using an iterative method. The weight function describing the asymptotic behavior of the stresses are investigated in detail and powers of the stress singularities are provided. To control the trustworthiness and correctness of the analytical formulation and to compare the resulting stress distributions and contact boundaries, a numerically efficient finite element method was employed using augmented Lagrange contact algorithm. The aim of this paper is to investigate the orthotropy effect, modeling parameters and coefficients of friction on the surface and interface stresses, surface and interface contact boundaries, powers of stress singularities, weight function and to provide highly parametric benchmark results for tribological community in designing wear resistant systems.

     

Matrix analytic methods for a multi-server retrial queue with buffer

We present numerical methods for obtaining the stationary distribution of states for multi-server retrial queues with Markovian arrival process, phase type service time distribution with two states and finite buffer; and moments of the waiting time. The methods are direct extensions of the ones for the single server retrial queues earlier developed by the authors. The queue is modelled as a level dependent Markov process and the generator for the process is approximated with one which is spacially homogeneous above some levelN. The levelN is chosen such that the probability associated with the homogeneous part of the approximated system is bounded by a small tolerance and the generator is eventually truncated above that level. Solutions are obtained by efficient application of block Gaussian elimination.     

Nonlinear dynamics of an elastic rod with frictional impact

A model is presented for the impact with friction of a flexible body in translation and rotation. This model consists of a system of nonlinear differential equations which considers the multiple collisions as well as frictional effects at the contacting end, and allows one to predict the rigid and elastic body motion after the impact. The kinetic energy is derived by utilizing a generalized velocity field theory for elastic solids. The model uses a dry coefficient of friction and a nonlinear contact force. We introduce a finite number of vibrational modes to take into account the vibrational behavior of the body during impact. The vibrations, the multiple collisions, and the angle of incidence angle, are found to be important factors for the kinematics of frictional impact. Analytical and experimental results were compared to establish the accuracy of the model.     

Optical absorption of a quantum well with an adjustable asymmetry

The effects of asymmetry and the electric field on the electronic subbands and the nonlinear intersubband optical absorption of GaAs quantum wells represented by a P?schl-Teller confining potential are studied. The potential itself can be made asymmetric through a correct choice of its parameter set and this adjustable asymmetry is important for optimizing the absorption. In that way optimal cases can be created. We calculate the modified wave functions and electronic subbands variationally. The linear and the nonlinear optical intersubband absorption coefficients are calculated. Numerical results for a typical GaAs quantum well are presented. The nonlinear part of the absorption coefficient is strongly modified by the asymmetry parameters while the electric field affects it at smaller values of the parameters. - 78.67.De Quantum wells     

Medialization Laryngoplasty With Gore-Tex: An Animal Study

Vocal cord paralysis is a disease that can cause voice disability and aspiration problems. Expanded polytetrafluoroethylene (ePTFE; Gore-Tex) has been widely used in cardiovascular and plastic surgery; however, its biocompatibility and safety have not been established precisely in the larynx. In this study, the biocompatibility and safety of ePTFE used in vocal cord medialization in the rabbit larynx were assessed. Type 1 thyroplasty with Gore-Tex was performed on one side of the larynx in eight rabbits. A sham procedure was applied on the contralateral side of their larynx. The rabbits were sacrificed after 6 months, and macroscopic and microscopic evaluations and comparisons were performed. No significant inflammatory response to Gore-Tex or displacement of the implant was seen. There was only a tiny fibrotic capsule surrounding the material in each specimen. Intense eosinophilic cell infiltration was seen surrounding one rabbit specimen. Gore-Tex seems to be a biocompatible, stable, and reversible material that can be safely used in laryngeal framework surgery.     

The $$MMAP\left[ K \right]/PH\left[ K \right]/1$$ queues with a last-come-first-served preemptive service discipline

This paper studies two queueing systems with a Markov arrival process with marked arrivals and PH-distribution service times for each type of customer. Customers (regardless of their types) are served on a last-come-first-served preemptive resume and repeat basis, respectively. The focus is on the stationary distribution of queue strings in the system and busy periods. Efficient algorithms are developed for computing the stationary distribution of queue strings, the mean numbers of customers served in a busy period, and the mean length of a busy period. Comparison is conducted numerically between performance measures of queueing systems with preemptive resume and preemptive repeat service disciplines. A counter-intuitive observation is that for a class of service time distributions, the repeat discipline performs better than the resume one. This revised version was published online in June 2006 with corrections to the Cover Date.     

Unifying Optimal Partition Approach to Sensitivity Analysis in Conic Optimization

We study convex conic optimization problems in which the right-hand side and the cost vectors vary linearly as functions of a scalar parameter. We present a unifying geometric framework that subsumes the concept of the optimal partition in linear programming (LP) and semidefinite programming (SDP) and extends it to conic optimization. Similar to the optimal partition approach to sensitivity analysis in LP and SDP, the range of perturbations for which the optimal partition remains constant can be computed by solving two conic optimization problems. Under a weaker notion of nondegeneracy, this range is simply given by a minimum ratio test. We discuss briefly the properties of the optimal value function under such perturbations.