Measurement of interchain and intrachain exciton hopping barriers in luminescent polymer

The integrated photoluminescence intensity in thin films of 'Super Yellow' copolymer has been analyzed using a Mott-like temperature dependence. This has enabled us to observe contributions from two emission channels, indicative of exciton recombination proceeding from two distinct origins. At high temperature, interchain thermally activated exciton energy transfer and migration dominates, resulting in large scale quenching of the integrated emission intensity and hence the photoluminescence quantum yield. However, at relatively low temperature, an additional increase of the integrated emission intensity occurs. This new channel of emission has been attributed to recombination from excitons where intrachain exciton energy transfer between adjacent subunits of the copolymer backbone becomes hindered. The activation energy barriers that control both of these emission channels have been obtained and are correlated with chain backbone degrees of freedom.     

Effect of steam on the single particle ignition of solid fuels in a drop tube furnace under air and simulated oxy-fuel conditions

This article investigates the effect of steam on the ignition of single particles of solid fuels in a drop tube furnace under air and simulated oxy-fuel conditions. Three solid fuels, all in the size range 125–150 µm, were used in this study; specifically, a low rank sub-bituminous Colombian coal, a low-rank/high-ash sub-bituminous Brazilian coal and a charcoal residue from black acacia. For each solid fuel, particles were burned at a constant drop tube furnace wall temperature of 1475?K, in six different mixtures of O₂/N₂/CO₂/H₂O, which allowed simulating dry and wet conventional and oxy-fuel combustion conditions. A high-speed camera was used to record the ignition process and the collected images were treated to characterize the ignition mode (either gas-phase or surface mode) and to calculate the ignition delay times. The Colombian coal particles ignite predominately in the gas-phase for all test conditions, but under simulated oxy-fuel conditions there is a decrease in the occurrence of this ignition mode; the charcoal particles experience surface ignition regardless of the test condition; and the Brazilian coal particles ignite predominately in the gas-phase when combustion occurs in mixtures of O₂/N₂/H₂O, but under simulated oxy-fuel conditions the ignition occurs predominantly on the surface. The ignition delay times for particles that ignited in the gas-phase are smaller than those that ignited on the surface, and generally the simulated oxy-fuel conditions retard the onset of both gas-phase and surface ignition. The addition of steam decreases the gas-phase and surface ignition delay times of the particles of both coals under simulated oxy-fuel conditions, but has a small impact on the gas-phase ignition delay times when the combustion occurs in mixtures of O₂/N₂/H₂O. The steam gasification reaction is likely to be responsible for the steam effect on the ignition delay times through the production of highly flammable species that promote the onset of ignition.     

Static anisotropic solutions in <Emphasis Type="Italic">f</Emphasis>(<Emphasis Type="Italic">T</Emphasis>) theory

In previous work, we undertook to study static and anisotropic content in f(T) theory and obtained new spherically symmetric solutions considering a constant torsion and some particular conditions for the pressure. In this paper, still in the framework of f(T) theory, new spherically symmetric solutions are obtained, first considering the general case of an isotropic fluid and later the anisotropic content case in which the generalized conditions for the matter content are considered such that the energy density, the radial and tangential pressures depend on the algebraic f(T) and its derivative f _T (T). Moreover, we obtain the algebraic function f(T) through the reconstruction method for two cases and also study a polytropic model for the stellar structure.     

Correlations of neutral and charged particles in 40Ar- 58Ni reaction at 77 MeV/u

The measurement of the two-particle correlation function for different particle species allows to obtain information about the development of the particle emission process: the space-time properties of emitting sources and the emission time sequence of different particles. The single-particle characteristics and two-particle correlation functions for neutral and charged particles registered in forward direction are used to determine that the heavy fragments (deuterons and tritons) are emitted in the first stage of the reaction (pre-equilibrium source) while the majority of neutrons and protons originates from the long-lived quasi-projectile. The emission time sequence of protons, neutrons and deuterons has been obtained from the analysis of non-identical particle correlation functions.     

Detection of small forest fires by lidar

The possibility of detecting small forest fires with the help of a simple and cheap lidar operating at 0.532-μm wavelength up to distances of about 6.5 km is demonstrated. The values of the signal-to-noise ratio (SNR) achieved in the experiments are consistent with theoretical estimations obtained by computational modeling of the lidar detection process, including simulation of the smoke-plume shape and of the laser beam–plume interaction. This model was used to assess the potential of the lidar technique for fire surveillance in large forest areas. In particular, the upper limiting range for effective detection (SNR>5) of small localized fires in dry- and clear-weather conditions is estimated at 7–15 km depending on operation mode, burning rate, and observation geometry. Received: 29 August 2001 / Published online: 29 November 2001     

Cisplatin filled multiwalled carbon nanotubes – a novel molecularhybrid of anticancer drug container

Here, a study on Cisplatin (cis-Diammineplatinum(II) dichloride – CDDP) insertion within multiwalled carbon nanotubes (MWCNTs) via capillary forces is presented. The employment of MWCNTs as anticancer drug nano-vectors is suggested by the harmful side effects occurring after the chemotherapeutic treatment due to the lack of selectivity of the chemotherapeutic agents in general. Cisplatin is widely used as a powerful cell-killer but without any cell-specificity. Via high resolution transmission electron microscopy (HR-TEM) CDDP clusters inserted into MWCNTs were detected. Energy dispersive X-ray spectroscopy (EDX) revealed the signal of CDDP constitutive elements. Raman Spectroscopy and InfraRed analysis excluded the presence of the drug on the tubes outer shell. Thermogravimetric (TGA) study was exploited to evaluate the purity of the material and to calculate the amount of CDDP incorporated into the tubes. A time dependent release of CDDP indicated that the outflow took place in the range between 12 and 48 h. After this time ~95% of the drug previously embedded was discharged.     

A New Chalcone Derivative with Promising Antiproliferative and Anti-Invasion Activities in Glioblastoma Cells

Glioblastoma (GBM) is the most common and most deadly primary malignant brain tumor. Current therapies are not effective, the average survival of GBM patients after diagnosis being limited to few months. Therefore, the discovery of new treatments for this highly aggressive brain cancer is urgently needed. Chalcones are synthetic and naturally occurring compounds that have been widely investigated as anticancer agents. In this work, three chalcone derivatives were tested regarding their inhibitory activity and selectivity towards GBM cell lines (human and mouse) and a non-cancerous mouse brain cell line. The chalcone 1 showed the most potent and selective cytotoxic effects in the GBM cell lines, being further investigated regarding its ability to reduce critical hallmark features of GBM and to induce apoptosis and cell cycle arrest. This derivative showed to successfully reduce the invasion and proliferation capacity of tumor cells, both key targets for cancer treatment. Moreover, to overcome potential systemic side effects and its poor water solubility, this compound was encapsulated into liposomes. Therapeutic concentrations were incorporated retaining the potent in vitro growth inhibitory effect of the selected compound. In conclusion, our results demonstrated that this new formulation can be a promising starting point for the discovery of new and more effective drug treatments for GBM.     

The UFM1 Pathway Impacts HCMV US2-Mediated Degradation of HLA Class I

To prevent accumulation of misfolded proteins in the endoplasmic reticulum, chaperones perform quality control on newly translated proteins and redirect misfolded proteins to the cytosol for degradation by the ubiquitin-proteasome system. This pathway is called ER-associated protein degradation (ERAD). The human cytomegalovirus protein US2 induces accelerated ERAD of HLA class I molecules to prevent immune recognition of infected cells by CD8⁺ T cells. Using US2-mediated HLA-I degradation as a model for ERAD, we performed a genome-wide CRISPR/Cas9 library screen to identify novel cellular factors associated with ERAD. Besides the identification of known players such as TRC8, p97, and UBE2G2, the ubiquitin-fold modifier1 (UFM1) pathway was found to affect degradation of HLA-I. UFMylation is a post-translational modification resembling ubiquitination. Whereas we observe ubiquitination of HLA-I, no UFMylation was detected on HLA-I or several other proteins involved in degradation of HLA-I, suggesting that the UFM1 pathway impacts ERAD in a different manner than ubiquitin. Interference with the UFM1 pathway seems to specifically inhibit the ER-to-cytosol dislocation of HLA-I. In the absence of detectable UFMylation of HLA-I, UFM1 may contribute to US2-mediated HLA-I degradation by misdirecting protein sorting indirectly. Mass spectrometry analysis of US2-expressing cells showed that ribosomal proteins are a major class of proteins undergoing extensive UFMylation; the role of these changes in protein degradation may be indirect and remains to be established.     

A Novel Route to the Synthesis of Mesoporous Titania with Full Anatase Nanocrystalline Domains

A porous, high surface area TiO₂ with anatase or rutile crystalline domains is advantageous for high efficiency photonic devices. Here, we report a new route to the synthesis of mesoporous titania with full anatase crystalline domains. This route involves the preparation of anatase nanocrystalline seed suspensions as the titania precursor and a block copolymer surfactant, Pluronic P123 as the template for the hydrothermal self-assembly process. A large pore (7–8 nm) mesoporous titania with a high surface area of 106–150 m²/g after calcination at 400°C for 4 h in air is achieved. Increasing the hydrothermal temperature decreases the surface area and creates larger pores. Characteristics of the seed precursors as well as the resultant mesoporous titania powder were studied using XRD analysis, N₂-adsorption/desorption analysis, and TEM. We believe these materials will be especially useful for photoelectrochemical solar cell and photocatalysis applications.