Controlling the self-assembly of a deoxiguaninosine on mica

We report a tapping mode scanning force microscopy investigation on the growth from solutions of a lipophilic deoxiguanosine derivative on the basal plane of a muscovite mica surface. By varying the chemical composition of the substrate surface it is possible to drive the self-assembly towards either layered thin films, which are very likely to consist of guanosine quartets, or nanoribbons, comprising hydrogen bonded networks. Both these two architectures, which are peculiar to the guanine base itself, are of notable importance for the fabrication of molecular nanowires. Moreover, the first arrangement provides evidence that the guanosine is able to behave as ionophore, thus, suggesting its utilization in the development of solid-state ion selective sensors.     

Conformational studies by dynamic NMR. 94.1 cogwheel pathway for the stereomutations of durene derivatives containing the mesityl ring

The low-temperature NMR spectra of 1,4-bis(mesitoyl)durene, 1, and of 1,4-bis(mesitylethenyl)durene, 2, reveal the presence of syn and anti rotamers at the equilibrium, their relative proportions depending on the dielectric constant of the solvent. In solution the more stable rotamer of 1 is the anti whereas, in the case of 2, the more stable is the syn. Depending on the crystallization solvent employed the more (anti) and the less stable (syn) rotamers were both observed (X-ray diffraction) in the solid state of 1. On the other hand, only the less stable rotamer (anti) was found to be present in the solid state of 2. As shown by MM calculations, the syn-to-anti interconversion occurs via a correlated process (cogwheel pathway) involving the mesityl-C and durene-C bond rotations: the dynamic NMR technique yields an experimental barrier of 8.2 kcal mol(-)(1) for 1 and 13.1 kcal mol(-)(1) for 2. In the case of derivative 2 a second barrier, due to a second type of correlated rotation process (torsion), was also determined (8.6 kcal mol(-)(1)). As a consequence of the restriction of this second torsional motion the anti rotamer of 2 displays two distinguishable NMR spectra at -133 degrees C, corresponding to a pair of conformers with different symmetry (anti C(i)() and anti C(2)).     

Additivity Factors in the Binding of the Diethyltin(IV) Cation by Ligands Containing Amino and Carboxylic Groups at Different Ionic Strengths

Complex formation constants were determined potentiometrically (by a ISE-H⁺, glass electrode) in the systems, M²⁺ – L^z – H⁺ [M²⁺ = (C₂H₅)₂Sn²⁺, L^z = malonate, glycinate and ethylenediamine] at t = 25 ^∘C and 0.1 mol-L⁻¹≤ I/ ≤ 1 mol-L⁻¹ in NaCl_aq (0.1 mol-L⁻¹ ≤ I ≤ 0.75 mol-L⁻¹ for the ethylenediamine system). Thermodynamic values of formation constants, at infinite dilution, are [± 95% confidence interval, ^Tβ_pqr refer to the equilibrium, pM²⁺ + qL^z + rH⁺ = M_pL_qH_r^(2+z+r)]: for malonate, log₁₀ ^Tβ₁₁₀ = (5.47 ± 0.10); for glycinate, log₁₀ ^Tβ₁₁₀ = (9.54 ± 0.08), log₁₀ ^Tβ₁₁₁ = (12.97 ± 0.10); and for ethylenediamine, log₁₀ ^Tβ₁₁₀ = (10.47 ± 0.10), log₁₀ ^Tβ₁₂₀ = (16.17 ± 0.12) and log₁₀ ^Tβ₁₁₁ = (15.46 ± 0.10). The dependence on ionic strength of the formation constants was modeled by a simple Debye–Hückel type equation and by the SIT approach. By analyzing the stability of the species in the three different systems we found a simple additivity rule that can be expressed by the relationship: log₁₀ K = 6.46 n_N + 3.96 n_O − 0.60 (n_N²+ n_O²), with a mean deviation, ε(log₁₀ K) = 0.15 (K = equilibrium constant for the interaction of the organometal cation with the unprotonated or protonated ligand, n_N = number of amino groups and n_O = number of carboxylic groups of the ligand(s) involved in the formation reaction of complex species).     

Establishing the synthetic origin of amphetamines by 2H NMR spectroscopy

Nine samples of N-acetyl-3,4-methylenedioxyamphetamine (N-acetyl-MDA), prepared according to the most common synthetic procedures, are submitted to (2)H NMR spectroscopy. The relative deuterium content at the various sites of the molecule is shown to depend on its synthetic history. The technique provides a chemical fingerprint of N-acetyl-MDAs and it can be used to trace back the precursor materials and the synthetic pathways employed in the preparation of the samples.     

A short synthesis of C-glycosyl pyrazoles and pyrroles

The sodium salt of TOSMIC reacted with (E)-3,4,5,6,7-penta-O-acetyl-1,2-dideoxy-1-C-nitro-D-galacto- (1) and -D-manno-hept-1-enitol (2) to give 3-(D-galacto- (3) and 3-(D-manno-penta-O-acetylpentitol-1-yl)-4-nitropyrrole (4) , respectively. Compound 1 reacted with diaryl nitrile imines, affording 1,3-diaryl-4-(1,2,3,4,5-penta-O-acetyl-D-galacto-pentitol-1-yl)pyrazoles 5 and 6 .     

Carotenoid triplet states associated with the long-wavelength-emitting chlorophyll forms of photosystem I in isolated thylakoid membranes

The carotenoid triplet populations associated with the long-wavelength-emitting chlorophyll forms of photosystem I (PS I)(dagger) have been investigated in isolated spinach thylakoids by means of fluorescence-detected magnetic resonance in zero field. The spectra collected in the 730-800 nm emission range can be globally fitted assuming the presence of four different carotenoid triplet states coupled to long-wavelength-emitting forms of PS I, having zero-field-splitting parameters /D/ = 0.0359 cm(-1) and /E/ = 0.00371 cm(-1), /D/ = 0.0382 cm(-1) and /E/ = 0.00388 cm(-1), /D/ = 0.0395 cm(-1) and /E/ = 0.00397 cm(-1), and /D/ = 0.0405 cm(-1) and /E/ = 0.00411 cm(-1). On the basis of the triplet-associated fluorescence emission profile, it is suggested that those triplets are associated with light-harvesting complex I, the peripheral antenna complex of PS I.     

Separation and analysis of the major constituents of cloves by micellar electrokinetic chromatography

A micellar electrokinetic chromatographic method was developed and applied for the first time to the separation and quantification of the main components of cloves, namely eugenol and beta-caryophyllene. The analytes were separated in less than ten minutes in an unmodified fused silica capillary (effective length: 40.0 cm) using a background electrolyte composed of 25 mM carbonate buffer (pH 10.0) and 60 mM sodium dodecylsulfate. Analyte concentrations were determined in clove oil and in methanolic clove extracts after simple sequential dilution with methanol and background electrolyte, and the resulting electropherograms showed no interference due to other components. Precision assays gave satisfactory results, with mean standard deviation of peak areas lower than 4.7% (lower than 1.5% for migration times). The eugenol content of a commercial clove oil was about 70% (RSD% = 3.2), while that of beta-caryophyllene was about 15% (RSD% = 4.2); in clove extracts, on the other hand, eugenol was approximately 15% (RSD% = 4.7) and beta-caryophyllene 4% (RSD% = 5.1). Accuracy was also good (mean recovery >98%).     

Regiocontrolled synthesis of enantiopure 3,3'-thiosubstituted biphenyls

Sulfenylation of 6,6'-dimethoxy-2,2'-dihydroxybiphenyl, used as a racemic mixture and single enantiomers, by phthalimidesulfenyl chloride afforded the corresponding 3,3'-N,N'-dithiophthalimide with complete regioselectivity. Simple manipulations of the latter compound allowed access to the corresponding bis-thiol or o-thioquinone as useful intermediates for the synthesis of new sulfur-containing open-chain and macrocyclic C(2) enantiopure ligands. The application of this methodology to the preparation of a biphenyl bearing two cysteine units as potential HIV-1 protease inhibitor is also described.     

Glutamate receptor incorporated in a mixed hybrid bilayer lipid membrane array, as a sensing element of a biosensor working under flowing conditions

The realization of a reliable receptor biosensor requires stable, long-lasting, reconstituted biomembranes able to supply a suitable biomimetic environment where the receptor can properly work after incorporation. To this end, we developed a new method for preparing stable biological membranes that couple the biomimetic properties of BLMs (bilayer lipid membranes) with the high stability of HBMs (hybrid bilayer membranes); this gives rise to an innovative assembly, named MHBLM (mixed hybrid bilayer lipid membrane). The present work deals with the characterization of biosensors achieved by embedding an ionotropic glutamate receptor (GluR) on MHBLM. Thanks to signal (transmembrane current) amplification, which is typical of natural receptors, the biosensor here produced detects glutamate at a level of nmol L(-1). The transmembrane current changes linearly vs glutamate up to 100 nmol L(-1), while the limit of detection is 1 nmol L(-1). In addition, the biosensor response can be modulated both by receptor agonists (glycine) and antagonists (Mg(2+)) as well, and by exploiting the biosensor response, the distribution of different kinds of ionotropic GluR present in the purified sample, and embedded in MHBLM, was also evaluated. Finally, one of the most important aspects of this investigation is represented by the high stability of the biomimetic system, which allows the use of biosensor under flowing conditions, where the solutions flow on both biomembrane faces.