Platinum Carbonyl Clusters Chemistry: Four Decades of Challenging Nanoscience

The state of art of the chemical, spectroscopic and structural characterization of platinum carbonyl clusters is reviewed. We begin by enlightening the fundamental contribution given to this chemistry of two great scientists: Paolo Chini and Larry Dahl, two without equal maestros of science and life. We then focus the main body of this review on the challenge represented by studying molecular ions already belonging to the nano regime by size almost 50 years ago, and the challenges their chemistry continues to present also nowadays. In detail, the possible reasons which enable the [Pt_3n (CO)_6n ]^2? oligomers to grow up to n = 10, and why the oligomers with n > 5 may self-assemble in infinite molecular conductor wires are suggested. The interplay between the CO/Pt_surface ratios and electronic effects in driving the platinum cluster from pseudo one- to tri-dimensional globular structures, often representing chunks of the fcc metal lattice or interpenetrated pentagonal prisms and icosahedra, is examined by means of two significant examples. The nanocapacitor behavior of most high-nuclearity carbonyl clusters is briefly recalled and is confirmed by most recent results. The size-induced transition of their metal kernels from insulator to semiconductor and the expected consequences of their eventual transition to a metallic state are also discussed. Finally, we conclude by commenting the present lack of Pt cluster interstitially lodging a main group element and not yet quantitatively-assessed aggregation phenomena in solution, perhaps peculiar of ionic salts of carbonyl clusters, which could make undetectable the NMR signal of any spin-active nuclei beyond a cluster nuclearity of ca. 20–25.     

Surface Roughness Characterization of Poly(methylmethacrylate) Films with Immobilized Eu(III) β-Diketonates by Fractal Analysis

The structural complexity of the 3-D surface of poly(methylmethacrylate) films with immobilized europium β-diketonates was studied by atomic force microscopy and fractal analysis. Fractal analysis of surface roughness revealed that the 3-D surface has fractal geometry at the nanometer scale. Poly(methylmethacrylate) (PMMA) as immobilization matrix is dense and uniform, and a tendency for formation of chain structures was observed. Fractal analysis can quantify key elements of 3-D surface roughness such as the fractal dimensions D _f determined by the morphological envelopes method of the Eu(DBM)₃ and Eu(DBM)₃ · dpp nanostructures, which are not taken into account by traditional surface statistical parameters.     

A Deadly Organometallic Luminescent Probe: Anticancer Activity of a ReI Bisquinoline Complex

The photophysical properties of [Re(CO)₃(L ‐N₃)]Br (L ‐N₃=2‐azido‐N,N‐bis[(quinolin‐2‐yl)methyl]ethanamine), which could not be localized in cancer cells by fluorescence microscopy, have been revisited in order to evaluate its use as a luminescent probe in a biological environment. The Re^I complex displays concentration‐dependent residual fluorescence besides the expected phosphorescence, and the nature of the emitting excited states have been evaluated by DFT and time‐dependent (TD) DFT methods. The results show that fluorescence occurs from a ¹LC/MLCT state, whereas phosphorescence mainly stems from a ³LC state, in contrast to previous assignments. We found that our luminescent probe, [Re(CO)₃(L ‐N₃)]Br, exhibits an interesting cytotoxic activity in the low micromolar range in various cancer cell lines. Several biochemical assays were performed to unveil the cytotoxic mechanism of the organometallic Re^I bisquinoline complex. [Re(CO)₃(L ‐N₃)]Br was found to be stable in human plasma indicating that [Re(CO)₃(L ‐N₃)]Br itself and not a decomposition product is responsible for the observed cytotoxicity. Addition of [Re(CO)₃(L ‐N₃)]Br to MCF‐7 breast cancer cells grown on a biosensor chip micro‐bioreactor immediately led to reduced cellular respiration and increased glycolysis, indicating a large shift in cellular metabolism and inhibition of mitochondrial activity. Further analysis of respiration of isolated mitochondria clearly showed that mitochondrial respiratory activity was a direct target of [Re(CO)₃(L ‐N₃)]Br and involved two modes of action, namely increased respiration at lower concentrations, potentially through increased proton transport through the inner mitochondrial membrane, and efficient blocking of respiration at higher concentrations. Thus, we believe that the direct targeting of mitochondria in cells by [Re(CO)₃(L ‐N₃)]Br is responsible for the anticancer activity.     

Blind prediction of HIV integrase binding from the SAMPL4 challenge

Here, we give an overview of the protein-ligand binding portion of the Statistical Assessment of Modeling of Proteins and Ligands 4 (SAMPL4) challenge, which focused on predicting binding of HIV integrase inhibitors in the catalytic core domain. The challenge encompassed three components—a small “virtual screening” challenge, a binding mode prediction component, and a small affinity prediction component. Here, we give summary results and statistics concerning the performance of all submissions at each of these challenges. Virtual screening was particularly challenging here in part because, in contrast to more typical virtual screening test sets, the inactive compounds were tested because they were thought to be likely binders, so only the very top predictions performed significantly better than random. Pose prediction was also quite challenging, in part because inhibitors in the set bind to three different sites, so even identifying the correct binding site was challenging. Still, the best methods managed low root mean squared deviation predictions in many cases. Here, we give an overview of results, highlight some features of methods which worked particularly well, and refer the interested reader to papers in this issue which describe specific submissions for additional details.     

Diffusion mechanism of CO2 in 13X zeolite beads

A systematic study of the diffusion mechanism of CO₂ in commercial 13X zeolite beads is presented. In order to gain a complete understanding of the diffusion process of CO₂, kinetic measurements with a zero length column (ZLC) system and a volumetric apparatus have been carried out. The ZLC experiments were carried out on a single bead of zeolite 13X at 38 °C at a partial pressure of CO₂ of 0.1 bar, conditions representative of post-combustion capture. Experiments with different carrier gases clearly show that the diffusion process is controlled by the transport inside the macropores. Volumetric measurements using a Quantachrome Autosorb system were carried out at different concentrations. These experiments are without a carrier gas and the low pressure measurements show clearly Knudsen diffusion control in both the uptake cell and the bead macropores. At increasing CO₂ concentrations the transport mechanism shifts from Knudsen diffusion in the macropores to a completely heat limited process. Both sets of experiments are consistent with independent measurements of bead void fraction and tortuosity and confirm that under the range of conditions that are typical of a carbon capture process the system is controlled by macropore diffusion mechanisms.     

High-refractive index acrylate polymers for applications in nanoimprint lithography

The development of polymeric optical materials with a higher refractive index,transparency in the visible spectrum region and easier processability is increasingly desirable for advanced optical applications such as microlenses,image sensors,and organic light-emitting diodes.Most acrylates have a low refractive index(around 1.50)which does not meet the high perfo rmance requirements of advanced optical materials.In this research,three novel acrylates were synthesized via a facile one-step approach and used to fabricate optical transparent polymers.All of the polymers reveal good optical properties including high transparency(≥90%)in the visible spectrum region and high refractive index values(1.6363)at 550 nm.Moreover,nanostructures of these acrylate polymers with various feature sizes including nanogratings and photonic crystals were successfully fabricated using nanoimprint lithography.These results indicate that these acrylates can be used in a wide range of optical and optoelectronic devices where nanopatterned films with high refractive index and transparency are required.     

Pandemic-Driven Development of a Medical-Grade,Economic and Decentralized Applicable Polyolefin Filament for Additive Fused Filament Fabrication

A polyolefin with certified biocompatibility according to USP class VI was used by our group as feedstock for filament-based 3D printing to meet the highest medical standards in order to print personal protective equipment for our university hospital during the ongoing pandemic. Besides the chemical resistance and durability, as well as the ability to withstand steam sterilization, this polypropylene (PP) copolymer is characterized by its high purity, as achieved by highly efficient and selective catalytic polymerization. As the PP copolymer is suited to be printed with all common printers in fused filament fabrication (FFF), it offers an eco-friendly cost–benefit ratio, even for large-scale production. In addition, a digital workflow was established focusing on common desktop FFF printers in the medical sector. It comprises the simulation-based optimization of personalized print objects, considering the inherent material properties such as warping tendency, through to validation of the process chain by 3D scanning, sterilization, and biocompatibility analysis of the printed part. This combination of digital data processing and 3D printing with a sustainable and medically certified material showed great promise in establishing decentralized additive manufacturing in everyday hospital life to meet peaks in demand, supply bottlenecks, and enhanced personalized patient treatment.     

A multidisciplinary approach to the mortars characterization from the Town Walls of Gubbio (Perugia,Italy)

Journal of Thermal Analysis and Calorimetry - In the frame of the HERACLES (HEritage Resilience Against CLimate Events on Site) project, a set of cultural heritage sites was studied to improve...     

Thermal,chemical and antimicrobial characterization of bioactive titania synthesized by sol–gel method

Journal of Thermal Analysis and Calorimetry - Chemical stability, anticorrosive properties and photocatalytic activity of titanium dioxide (TiO2) are among the most important characteristics for...