Do proficiency tests always verify laboratories’ performance? The case of FAPAS PT 0270

In this paper, the case of FAPAS PT 0270 “Doramectin and Oxfendazole in Sheep Liver” is discussed. During evaluation of the data received from participants (determination of total, oxidised oxfendazole residue and calculation of the sum of oxfendazole and oxfendazole sulfone residues), significant differences were observed between the results obtained by use of two analytical approaches. This phenomenon can be explained by the route of oxfendazole metabolism, which results in the presence of fenbendazole in the sample. This was not predicted by the provider; consequently, not all the necessary tests on the material were conducted. Due to the high uncertainty of the z-scores in this test, the results of the PT cannot be used for purposes of evaluation, and the benefits of participation in PT 0270 are questionable.     

Carotenoid triplet states associated with the long-wavelength-emitting chlorophyll forms of photosystem I in isolated thylakoid membranes

The carotenoid triplet populations associated with the long-wavelength-emitting chlorophyll forms of photosystem I (PS I)(dagger) have been investigated in isolated spinach thylakoids by means of fluorescence-detected magnetic resonance in zero field. The spectra collected in the 730-800 nm emission range can be globally fitted assuming the presence of four different carotenoid triplet states coupled to long-wavelength-emitting forms of PS I, having zero-field-splitting parameters /D/ = 0.0359 cm(-1) and /E/ = 0.00371 cm(-1), /D/ = 0.0382 cm(-1) and /E/ = 0.00388 cm(-1), /D/ = 0.0395 cm(-1) and /E/ = 0.00397 cm(-1), and /D/ = 0.0405 cm(-1) and /E/ = 0.00411 cm(-1). On the basis of the triplet-associated fluorescence emission profile, it is suggested that those triplets are associated with light-harvesting complex I, the peripheral antenna complex of PS I.     

Separation and analysis of the major constituents of cloves by micellar electrokinetic chromatography

A micellar electrokinetic chromatographic method was developed and applied for the first time to the separation and quantification of the main components of cloves, namely eugenol and beta-caryophyllene. The analytes were separated in less than ten minutes in an unmodified fused silica capillary (effective length: 40.0 cm) using a background electrolyte composed of 25 mM carbonate buffer (pH 10.0) and 60 mM sodium dodecylsulfate. Analyte concentrations were determined in clove oil and in methanolic clove extracts after simple sequential dilution with methanol and background electrolyte, and the resulting electropherograms showed no interference due to other components. Precision assays gave satisfactory results, with mean standard deviation of peak areas lower than 4.7% (lower than 1.5% for migration times). The eugenol content of a commercial clove oil was about 70% (RSD% = 3.2), while that of beta-caryophyllene was about 15% (RSD% = 4.2); in clove extracts, on the other hand, eugenol was approximately 15% (RSD% = 4.7) and beta-caryophyllene 4% (RSD% = 5.1). Accuracy was also good (mean recovery >98%).     

Regiocontrolled synthesis of enantiopure 3,3'-thiosubstituted biphenyls

Sulfenylation of 6,6'-dimethoxy-2,2'-dihydroxybiphenyl, used as a racemic mixture and single enantiomers, by phthalimidesulfenyl chloride afforded the corresponding 3,3'-N,N'-dithiophthalimide with complete regioselectivity. Simple manipulations of the latter compound allowed access to the corresponding bis-thiol or o-thioquinone as useful intermediates for the synthesis of new sulfur-containing open-chain and macrocyclic C(2) enantiopure ligands. The application of this methodology to the preparation of a biphenyl bearing two cysteine units as potential HIV-1 protease inhibitor is also described.     

Reduced Overlap Population Analysis for Triosmium Clusters

The use of reduced overlap population (ROP) analysis from EHMO calculations as a means to gauge the presence of metal–metal bonds in triosmium clusters is examined. A number of triosmium clusters containing bridging ligands have been used as test cases, including the bis-ethoxy bridged cluster Os₃(μ-OEt)₂(CO)₁₀, 1b, and some of its group 15 derivatives Os₃(μ-OEt)₂(CO)₉(EPh₃), 2. These latter clusters are newly synthesized and have been characterized completely, including by single-crystal X-ray crystallographic studies. In honour of Professor Dieter Fenske on his 65th birthday.     

Glutamate receptor incorporated in a mixed hybrid bilayer lipid membrane array, as a sensing element of a biosensor working under flowing conditions

The realization of a reliable receptor biosensor requires stable, long-lasting, reconstituted biomembranes able to supply a suitable biomimetic environment where the receptor can properly work after incorporation. To this end, we developed a new method for preparing stable biological membranes that couple the biomimetic properties of BLMs (bilayer lipid membranes) with the high stability of HBMs (hybrid bilayer membranes); this gives rise to an innovative assembly, named MHBLM (mixed hybrid bilayer lipid membrane). The present work deals with the characterization of biosensors achieved by embedding an ionotropic glutamate receptor (GluR) on MHBLM. Thanks to signal (transmembrane current) amplification, which is typical of natural receptors, the biosensor here produced detects glutamate at a level of nmol L(-1). The transmembrane current changes linearly vs glutamate up to 100 nmol L(-1), while the limit of detection is 1 nmol L(-1). In addition, the biosensor response can be modulated both by receptor agonists (glycine) and antagonists (Mg(2+)) as well, and by exploiting the biosensor response, the distribution of different kinds of ionotropic GluR present in the purified sample, and embedded in MHBLM, was also evaluated. Finally, one of the most important aspects of this investigation is represented by the high stability of the biomimetic system, which allows the use of biosensor under flowing conditions, where the solutions flow on both biomembrane faces.     

Hydrogen–hydrogen bonding in biphenyl revisited

The evidence for the stabilizing nature of the H–H bonding in planar biphenyl is succinctly reviewed. The stabilizing nature of the H–H bonding is revealed through a comparison of the atomic energy of every atom in planar biphenyl with the same atom in the twisted equilibrium structure. It is shown that the barrier to rotation via the planar transition state is the net resultant of a stabilisation of the four ortho-hydrogen atoms (by 8 kcal/mol each), a stabilisation of the two para-carbon atoms (by 3 kcal/mol each) and by the dominant destabilisation of the two carbon atoms joining the two rings—the two junction carbon atoms—(by 22 kcal/mol each). The energetic stabilisation of the four ortho-hydrogen atoms is further shown to be in large proportion due to the formation of the hydrogen–hydrogen interatomic surface. Furthermore, neither the “bond order” between the two junction carbon atoms nor the total electron delocalisation between the two rings exhibit a significant change in going from the planar to the twisted equilibrium geometry. These findings are in contrast with the classical view of a balance between “steric non-bonded repulsion” and better electron delocalisation as a function of the twist dihedral angle. Similar conclusions have been recently reached by Pacios and Gómez through a study of the electrostatic potential at the position of the hydrogen nuclei. We dedicate this article to Professor TM Krygowski on the occasion of his 70th birthday wishing him a long and productive life.     

Electrochemical investigation of hymecromone at a multi-wall carbon nano-tube/cetyl pyridine bromine composite film electrode

A multi-wall carbon nanotube (MWNT)/cetyl pyridine bromine (CPB) composite film modified glassy carbon electrode (GCE) was developed for the electrochemical determination of hymecromone in phosphonate buffer. Electrochemical behaviour of hymecromone at the composite film electrode was investigated with voltammetry. Compared with an irreversible oxidation of hymecromone at the bare GCE, the oxidation peak current was enhanced greatly at the film electrode. Some parameters such as pH, scan rate, accumulation potential and accumulation time were optimized. Under optimal conditions, an oxidation peak at 0.82 V was employed to determine hymecromone electrochemically. A linearity between the oxidation peak current and the hymecromone concentration was obtained in the range of 3.0 × 10⁻⁷ − 2.0 × 10⁻⁵ mol 1⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol 1⁻¹. The proposed procedure was successfully applied to assay hymecromone in pharmaceutical formulation with satisfactory results. The text was submitted by the authors in English.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

Two novel four-coordinated zinc(II) complexes [Zn(dmatrz)<Subscript>2</Subscript>Cl<Subscript>2</Subscript>] and [Zn(dmatrz)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>] exhibiting strong blue fluorescent properties

Two novel complexes, [Zn(dmatrz)₂]Cl₂ (1) and [Zn(dmatrz)₂(SCN)₂] (2), have been prepared and characterized by X-ray crystallography, absorption and luminescence spectrometries (dmatrz=3,5-dimethy-4-amino-1,2,4-triazole). The coordination environment of the zinc(II) ions in (1) and (2) has a distorted tetrahedral geometry completed via two independent nitrogen atoms of two triazole ligands and two anions, respectively. Both (1) and (2) show strong blue luminescence properties. Furthermore, (1) displays stronger blue photoluminescence than (2) as the result of different anions (Cl^- and SCN^-) coordinated to the zinc(II) ions.