Strategy of Cr detoxification by Callitriche cophocarpa

The present work focused on the qualitative and quantitative analysis of Cr detoxification strategy of aquatic cosmopolitan plant Callitriche cophocarpa. This plant species has just been described in the context of its unusual accumulation potential of Cr. The emphasis of the work was placed on the redox reaction Cr(VI)→Cr(III) which is considered to be remediation mechanism of highly reactive and mobile Cr(VI) ions. Plants were immersed for 5 days in 1 mM of Cr(VI) (potassium dichromate) or 1 mM of Cr(III) (chromium sulphate) solutions in semi-natural conditions. Cr was effectively removed from the solution up to the extent of ca.58% or 35% of the starting amount, in the case of Cr(III) and Cr(VI), respectively. No plant-induced Cr(VI) reduction accompanying Cr accumulation was observed in Cr(VI) solutions except from the apparent one, noticed at the fourth day of incubation. On the contrary to these results, according to the method of electron paramagnetic resonance spectroscopy (L-band EPR), biphasic signal of Cr(V) attending Cr(VI) to Cr(III) reduction was detected inside the plant tissue every day of investigations. Our results show that phytoextraction but not phytostabilization is the main strategy of Cr detoxification by C. cophocarpa in aquatic systems.      

Use of direct immersion solid-phase microextraction on polyacrylate and polydimethylsiloxane stationary phases for simultaneous determination of the neutral and basic pharmaceuticals in wastewater

Direct immersion solid-phase microextraction has been optimized and applied to the simultaneous determination of the neutral and basic pharmaceuticals: caffeine, carbamazepine, clomipramine, chlorprothixene and clotrimazole at low concentrations in municipal wastewater. Two absorption type stationary phases: polydimethylsiloxane (PDMS) and polyacrylate (PA) have been found to be most effective for extraction of target analytes. The separation and detection were carried out by gas chromatograph coupled with mass spectrometer working in the selected ion monitoring mode. The method was validated for linearity, detection and quantitation limits, selectivity and precision. The average correlation coefficient of the calibration curves was 0.9933. The LOD values in influent and effluent wastewater were in the range of 10–145 ng L^?1 and 4–111 ng L^?1, respectively, which were a bit higher than those in the deionized water due to matrix effect. The high values of distribution coefficient (K _fs ) in PDMS/water and PA/water systems (log K _fs between 3.05 and 4.23) indicates the very high applicability of these stationary phases for determination of carbamazepine, clomipramine, chlorprothixene and clotrimazole in water samples.

Open image in new window

     

Changes of organic acids and phenolic compounds contents in grapevine berries during their ripening

Changes of total content of phenolic substances, alteration in total titratable acidity and differences in tartaric acid content in grapes of four white (Müller-Thurgau — MT, Pinot Blanc — Rulandské bílé in Czech, RB, Sauvignon (Sg), and Muscat Ottonel — Mu?kát Ottonel in Czech, MO) and two blue (Dornfelder — Df and Blue Frankish — Frankovka in Czech, Fr) grapevine varieties throughout their growth, ripening and maturing (July–November). Potentiometric titration was applied for the determination of total titratable acids in grapes (expressed as tartaric acid equivalents in g L^?1). A spectrophotometric method according Rebelein based on the formation of a colored complex of ammonium metavanadate and tartaric acid was used for determination of tartaric acid in green juice made by pressing unripe grapes. A spectrophotometric method based on reduction of phosphomolybdato-tungsten complex in alkaline solution using Folin-Ciocalteau reagent was applied for determination of total content of phenolic substances (TCP).

Open image in new window

     

Amide,urea and thiourea‐containing triphenylene derivatives: influence of H‐bonding on mesomorphic properties

The synthesis and thermotropic properties are reported for a series of hexaalkoxytriphenylenes that contain an amide, urea or thiourea group in one of their alkoxy tails. The intermolecular hydrogen bonding abilities of these molecules have a disturbing influence on the formation and stability of the columnar liquid crystalline phases. The stronger the hydrogen bonding the more the liquid crystallinity is suppressed, probably due to disturbance of the π–π stacking of the triphenylene discs. As a direct result, urea‐ and amide‐containing triphenylene derivatives are not liquid crystalline, but several thiourea derivatives show hexagonal columnar mesophases.     

Dielectric studies of the 4-n-alkyl-4'-thiocyanatobiphenyl (nBT) homologous series (n=2-10) in the isotropic and E phases

Results of the dielectric studies of nine members of the nBT (4-n-alkyl-4'-thiocyanatobiphenyl, n= 2-10) homologous series in the crystal E (E) and isotropic (I) phases are presented. The dependence of the static permittivity ?_s in the isotropic phase, the longitudinal relaxation times τ_is and τ_∥, and the activation enthalpies ΔH _is and ΔH _∥ on the number of carbon atoms in the alkyl chain n are analysed. A considerable increase in the retardation factor g= τ_∥/τ_is with decreasing n is observed. The results are compared with those obtained for similar two-ring homologous series. The parameters characterizing the molecular rotations around the short axis in the E phase (τ_∥ and ΔH _∥) indicate a hardening of this solid-like phase with shortening of the alkyl chain.     

β-Galactosidase-Catalyzed Synthesis of Galactosyl Chlorphenesin and Its Characterization

We synthesized galactosyl chlorphenesin (CPN-G) using β-gal-containing Escherichia coli (E. coli) cells in which the conversion yield of chlorphenesin (CPN) to CPN-G reached about 64 % during 12 h. CPN-G was identified and characterized using high-performance liquid chromatography, liquid chromatography-mass spectrometry, Fourier transform-infrared spectrometry, and nuclear magnetic resonance analysis (¹H and ¹³C). We verified that a galactose was covalently bound to a CPN alcohol group during CPN-G synthesis throughout these analyses. In particular, by the hydrolysis of CPN-G using β-gal, it was confirmed that a galactose was bound to CPN. The minimal inhibitory concentration (MIC) results showed that the CPN-G MICs were fairly similar to those of CPN. HACAT cell viability was significantly higher in CPN-G-treated cells than in CPN-treated cells at concentrations of 0.0–20.0 mM. Finally, we accomplished the synthesis of less toxic CPN-G, compared with CPN, using β-gal-containing E. coli cells as whole cells without changes in the MICs against microorganisms.     

Calorimetric determination of the effect of additives on cement hydration process

Possibilities of a multicell isoperibolic-semiadiabatic calorimeter application for the measurement of hydration heat and maximum temperature reached in mixtures of various compositions during their setting and early stages of hardening are presented. Measurements were aimed to determine the impact of selected components?? content on the course of ordinary Portland cement (OPC) hydration. The following components were selected for the determination of the hydration behaviour in mixtures: very finely ground granulated blast furnace slag (GBFS), silica fume (microsilica, SF), finely ground quartz sand (FGQ), and calcined bauxite (CB). A commercial polycarboxylate type superplasticizer was also added to the selected mixtures. All maximum temperatures measured for selected mineral components were lower than that reached for cement. The maximum temperature increased with the decreasing amount of components in the mixture for all components except for silica fume. For all components, except for CB, the values of total released heat were higher than those for pure Portland cement samples.     

Thiophenium-ylides: Synthesis and reactivity

The reaction of propanedioic acid, 2-diazo-1,3-bis(1,1-dimethylethyl) ester (di-tert-butyl diazomalonate) with a series of cyclopenta[b]thiophenes in the presence of catalytic rhodium acetate was studied. The resulting S—C ylides underwent a rearrangement to form a heterocycle with different topology; thialene, in very low yields. Experimental and spectral data for all compounds are provided.     

Palladium-catalysed Claisen rearrangement of 6-allyloxypurines

6-Allyloxypurines readily undergo palladium-catalysed Claisen rearrangement under mild conditions affording N ¹-substituted hypoxanthines. In contrast with the previously reported protocol, the Claisen rearrangement can be performed using Pd(PPh₃)₄ or Pd(dba)₂/dppf in dry THF at 60°C. The reaction can accommodate variously substituted allyl fragments to position N ¹ of the hypoxanthine skeleton with high yields. Retention of the double bond configuration during rearrangement was observed.     

Applicability of photochemically generated pendant benzoyl peroxides in both “grafting from” and “grafting to” techniques

Methyl methacrylate and styrene copolymers containing pendant benzil groups, such as 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-methyl metacrylate (BzMA/MMA), 1-[4-(2-methacroyloxyethoxy)phenyl]-2-phenyl-1,2-ethanedione-co-styrene (BzMA/S), and 1-phenyl-2-(4-propenoylphenyl)-1,2-ethanedione-co-styrene (PCOCO/S), were prepared and used as precursors for photochemically generated pendant benzoyl peroxides. Decomposition of the pendant benzoyl peroxides was subsequently used in grafting processes. Either irradiation or a combination of irradiation with subsequent thermal treatment was adopted for grafting a thin layer of BzMA/MMA copolymer onto the surface of LDPE films. The grafting resulted in a significant decrease in contact angle of the film surface. The same activation strategy was successfully adopted to initiate the polymerisation of acrylic or methacrylic acids from the surface of styrene copolymer films containing the initiator precursor in the polymer side chains (BzMA/S and PCOCO/S). The successful surface grafting was proved by contact angles measurement as well as by infrared spectroscopic analysis.