Bioglass thin films for biomimetic implants

Pulsed laser deposition (PLD) method was used to obtain bioglass (BG) thin film coatings on titanium substrates. An UV excimer laser KrF* (λ = 248 nm, τ = 25 ns) was used for the multi-pulse irradiation of the BG targets with 57 or 61 wt.% SiO₂ content (and Na₂O-K₂O-CaO-MgO-P₂O₅ oxides). The depositions were performed in oxygen atmosphere at 13 Pa and for substrates temperature of 400 °C. The PLD films displayed typical BG of 2-5 μm particulates nucleated on the film surface or embedded in. The PLD films stoichiometry was found to be the same as the targets. XRD spectra have shown, the glass coatings obtained, had an amorphous structure. One set of samples, deposited in the same conditions, were dipped in simulated body fluids (SBFs) and subsequently extracted one by one after several time intervals 1, 3, 7, 14 and 21 days. After washing in deionized water and drying, the surface morphology of the samples and theirs composition were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), IR spectroscopy (FTIR) and energy dispersive X-ray analysis (EDX). After 3-7 days the Si content substantially decreases in the coatings and PO₄³⁻ maxima start to increase in FTIR spectra. The XRD spectra also confirm this evolution. After 14-21 days the XRD peaks show a crystallized fraction of the carbonated hydroxyapatite (HAP). The SEM micrographs show also significant changes of the films surface morphology. The coalescence of the BG droplets can be seen. The dissolution and growth processes could be assigned to the ionic exchange between BG and SBFs.     

XPS characterization of naturally aged wood

Wood deterioration over time (by a simultaneously biological, chemical or physical attack) is an inevitable continuous process in the environment. This process destroys all heritage resulting in a loss of valuable old wooden structures and their properties. What type of deterioration occurs and how these processes impact the wood are important questions that need consideration if old wooden structures are to be studied and properly preserved.X-ray photoelectron spectroscopy (XPS) was employed to analyze the undegraded (sound wood of ∼6 years) and degraded lime wood (∼150 years, ∼180 years, ∼250 years) from painting supports, differing in terms of the provenance, conservation status and environmental conditions of storage. Elaborated XPS analysis (comparison of C and O individual spectra, decomposition for each atomic component, calculation of O/C ratio) provided a view of the composition of the sample surfaces analyzed. On the basis of these results, it was confirmed that significant changes occurred in the first period of ageing, the ∼150 years lime wood sample having the highest percent of the carbon atoms and the lowest percentage of oxygen atoms and, respectively O/C ratio. According to our previous studies (X-ray diffraction, FTIR spectroscopy, analytical pyrolysis combined with gas chromatography/mass spectrometry and ESR-spectroscopy results), these features could be attributed to the fact that hemicelluloses and amorphous cellulose are degraded in time, whereas the crystalline fraction of cellulose decreases more slowly than the amorphous one. Consequently, the observation may be made that lignin is not so easily degraded under the environmental conditions where paintings are frequently exposed.     

Coarsening of mass-selected Au clusters on amorphous carbon at room temperature

Low-energy cluster beam deposition was used to deposit mass-selected Au_n clusters (n = 4, 6, 13 and 20) on amorphous carbon (a-C) substrates. The resulting samples were stored at room temperature under ambient conditions for time periods up to 32 months to analyze the coarsening behaviour of the clusters. Cluster-size distributions were measured in regular time intervals by transmission electron microscopy (TEM). The TEM experiments show a significant increase of the average cluster size with time analogous to classical surface Ostwald ripening (OR). The coarsening of Au clusters can be well described by steady-state diffusion-limited kinetics. The derived surface mass-transport diffusion coefficients at room temperature range between 1.1 and 3.8·10⁻²⁵ m² s⁻¹ for our samples. A detailed analysis of values suggests that, the rate of the surface OR for mass-selected Au_n clusters increases with the cluster size in the sequence: Au₄ ≈ Au₆ < Au₁₃ < Au₂₀ for the investigated range of Au clusters. Given that the initial, on-surface cluster-size distributions are nominally monodisperse, classical OR with cluster coarsening based only on the Gibbs-Thomson effect cannot explain the observed coarsening. The activation of the coarsening process is rationalized by initial variations of the cluster sizes due to the deposition process itself and/or the interaction of the clusters with the substrate. Moreover, the presence of initial deposited Au clusters as different isomers with slightly different chemical potential on the substrate, may also initiate the coarsening by surface OR. Furthermore, we find that the coarsening is most pronounced for the paucidispersed sample with Au_m (10 ? m ? 20) clusters. A possible explanation of this behaviour is the presence of an initial distribution of different cluster sizes directly after deposition.     

Functional polymethacrylates as bacteriostatic polymers

Two copolymers, P(PCEMA-co-MMA) and P(t-BMA-block-PCEMA), were prepared via ATRP using 2-(phenoxycarbonyloxy)ethyl methacrylate (PCEMA) as reactive monomer and methyl methacrylate (MMA) or tert-butyl methacrylate (t-BMA) as co-monomers. Alternatively phenoxycarbonyloxy decorated polymethacrylates were obtained via polymer analogous reaction: P(HEMA) was reacted with phenyl chloroformate to yield P(PCEMA). The highly reactive phenoxycarbonyloxy groups were used for polymer analogous reactions with nucleophiles to obtain polymers with ionic/hydrophilic and hydrophobic side groups. Different amines with long alkyl chains or tertiary amine groups were reacted with phenoxycarbonyloxy decorated polymers and subsequently reacted with methyl iodide to obtain amphipathic polymers with bacteriostatic properties.     

BaTiO3 and PbTiO3 perovskite as catalysts for methane combustion

Unsupported and γ-Al₂O₃-supported Ba and Pb titanate catalysts were prepared, characterized and studied in the combustion of methane, as a test reaction for VOCs’ catalytic combustion. They present good catalytic activities, and after dispersion (5%) on γ-Al₂O₃ the specific activity of the supported perovskite phase increased 25 and 30 times, respectively, compared with the unsupported samples. PbTiO₃/γ-Al₂O₃ shows the best catalytic properties among the tested samples.     

Synthesis and structural characterization of amino-functionalized polysaccharides

A variety of carbohydrates, in particular polysaccharides can be subjected to chemical modification to obtain derivatives with amphiphilic properties, which enable biochemical or biological reactions at the polymer surface. In the present work, a polydisperse maltodextrin mixture of average molecular weight 3000 was coupled with 1,6-hexamethylenediamine (HMD) via reductive amination reaction. Resulting products were characterized by thermal analysis and positive nanoelectrospray quadrupole time-of-flight (Q-TOF) mass spectrometry (MS) and tandem mass spectrometry (MS/MS). Both thermal analysis and MS screening confirmed the formation of the HMD-polysaccharide coupling products. Moreover, HMD-linked polysaccharide chains containing 2 to 26 glucose building blocks were identified by nanoESI Q-TOF MS. MS/MS fragmentation using collision-induced dissociation (CID) at low ion acceleration energies provided strong evidence for HMD-maltodextrin linkage formation and the set of sequence ions diagnostic for the composition and structure of a HMD-linked chain containing 18 glucose residues.      

Noncommutative transforms and free pluriharmonic functions

In this paper, we study free pluriharmonic functions on noncommutative balls γ[Bn(H)], γ>0, and their boundary behavior. These functions have the form

     

Fundamental solution for linear two-point boundary value problem

The quadratic functional minimization with differential restrictions represented by the command linear systems is considered. The optimal solution determination implies the solving of a linear problem with two points boundary values. The proposed method implies the construction of a fundamental solution S(t)—a n×n matrix—and of a vector h(t) defining an adjoint variable λ(t) depending of the state variable x(t). From the extremum necessary conditions it is obtained the Riccati matrix differential equation having the S(t) as unknown fundamental solution is obtained. The paper analyzes the existence of the Riccati equation solution S(t) and establishes as the optimal solution of the proposed optimum problem. Also a superior limit of the minimum for the considered quadratic functionals class are evaluated.     

Polyaniline/Maleic Acid Copolymers Composites: Synthesis and Characterization

Summary: Polyaniline/maleic acid copolymers composites were synthesized by chemical in situ polymerization of aniline using ammonium peroxidisulfate as oxidant, in the presence of water soluble copolymers containing carboxylic groups. Fine dispersions of composite materials, soluble in N,N-dimethylformamide or dimethyl sulfoxide were obtained which can be processed as thin films and membranes for application as proton-conductive materials for electrolyte membranes of fuel cells. The composites were characterized by FTIR spectroscopy and thermal methods.     

Linker depletion for missing cluster defects in non-UiO metal–organic frameworks

Defect engineering is a valuable tool to tune the properties of metal–organic frameworks. However, defect chemistry remains still predominantly limited to UiO-type MOFs. We describe the preferential formation of missing cluster defects in heterometallic titanium–organic frameworks of the MUV-10 family when synthesised in sub-stoichiometric linker conditions. Our results show the value of integrating experimental work, computational modelling and thorough characterization in rationalizing the impact of defects over the porosity and structure of this family of materials. Correlation of experiment with computational models reveals the dominance of missing cluster vacancies in the pore size distribution of defective MUV-10. These same models were used to investigate the correlation of defects by synchrotron X-ray diffraction. The diffraction at low reflection angles is dominated by diffuse scattering that is indicative of short-range order and cannot be indexed to the defective structural models generated. In addition to the low atomic scattering factor of titanium, these results confirm the need for high-resolution electron microscopy methods for modelling nanoscale disorder in titanium MOFs.

Synthesis of MUV-10 in sub-stoichiometric linker conditions favours the formation of missing cluster vacancies for direct impact in their porosity.