Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Semi-industrial isolation of salicin and amygdalin from plant extracts using slow rotary counter-current chromatography

Salicin in the bark extract of Salix alba and amygdalin in the fruit extract of Semen armeniacae were each separated by slow rotary counter-current chromatography (SRCCC). The apparatus was equipped with a 40-L column made of 17 mm i.d. convoluted Teflon tubing. A 500g amount of crude extract containing salicin at 13.5% was separated yielding 63.5 g of salicin at 95.3% purity in 20h using methyl tert-butyl ether-l-butanol (1:3) saturated by methanol-water (1:5) as a stationary phase and methanol-water (1:5) saturated by methyl tert-butyl ether-1-butanol (1:3) as a mobile phase. A 400g amount of crude extract containing amygdalin at 55.3% was isolated to yield 221.2g of amygdalin at 94.1% purity in 19h using ethyl acetate-1-butanol (1:2) saturated by water as a stationary phase and water saturated by ethyl acetate-1-butanol (1:2) as a mobile phase. The flow rate of the mobile phase was 50 ml/min. The results show that industrial SRCCC separation of salicin and amygdalin is feasible using a larger column at a higher flow rate of the mobile phase.     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

DNA-templated self-assembly of protein and nanoparticle linear arrays

Self-assembling DNA tiling lattices represent a versatile system for nanoscale construction. Self-assembled DNA arrays provide an excellent template for spatially positioning other molecules with increased relative precision and programmability. Here we report an experiment using a linear array of DNA triple crossover tiles to controllably template the self-assembly of single-layer or double-layer linear arrays of streptavidin molecules and streptavidin-conjugated nanogold particles through biotin-streptavidin interaction. The organization of streptavidin and its conjugated gold nanoparticles into periodic arrays was visualized by atomic force microscopy and scanning electron microscopy.     

A Theoretical Study of Complex Formation between Formaldehyde and Lithium

Ab initio SCF and CI calculations on the cationic and neutral complexes of formaldehyde and lithium are reported. For the cationic complex CH₂O/Li⁺, the stabilization energy of 41.7 kcal/mol obtained from the SCF calculation increases to 51.6 kcal/mol if a configuration interaction is introduced. For the neutral complex CH₂O^?/Li⁺, the C_2v-conformer of the ²A₁-state with the equilibrium bond distances of d(C? O) = 1.23 Å and d (O? Li) = 1.90 Å is calculated to be more stable than the ₂B₁-state with d (C? O) = 1.34 Å, and d (O? Li) = 1.65 Å. Charge transfer and polarization effects upon complex formation are discussed.     

Determination of Cr(III) and Cr(VI) in environmental waters by derivative flame atomic absorption spectrometry using flow injection on-line preconcentration with double-microcolumn adsorption

The species of Cr(III) and Cr(VI) in water samples were determined by flow injection on-line preconcentration and separation on two-microcolumn system-derivative flame atomic absorption spectrometry during a collaborative analysis for certification. The Cr(III) and Cr(VI) in water samples were retained on two microcolumns with ion exchange resin and were eluted directly to nebulizer by 15% HNO³ and 8% NH⁴NO³, respectively. The characteristic concentration (at the sensitivity grade of 2 mV min^?1 for 1 min of preconcentration time) for Cr(III) and Cr(VI) were 0.130 and 0.0985 μg l^?1, in the order which were 332- and 431-fold better than those of FAAS, and 45- and 47-fold better than those of FI-FAAS, respectively. The relative standard deviations were 3.27% and 3.66% with corresponding detection limits (3σ) of 0.244 and 0.235 μg l^?1, respectively. The linear ranges of determinations for Cr(III) and Cr(VI) were 0～100 μgm l^?1 with correlation coefficients of 0.9984 to 0.9996. The satisfactory recovery of 94.4%～106% for Cr(III) and Cr(VI) could be obtained from water samples.     

Structural and Functional Analysis of the Pyridoxal Phosphate Homeostasis Protein YggS from Fusobacterium nucleatum

Pyridoxal 5′-phosphate (PLP) is the active form of vitamin B6, but it is highly reactive and poisonous in its free form. YggS is a PLP-binding protein found in bacteria and humans that mediates PLP homeostasis by delivering PLP to target enzymes or by performing a protective function. Several biochemical and structural studies of YggS have been reported, but the mechanism by which YggS recognizes PLP has not been fully elucidated. Here, we report a functional and structural analysis of YggS from Fusobacterium nucleatum (FnYggS). The PLP molecule could bind to native FnYggS, but no PLP binding was observed for selenomethionine (SeMet)-derivatized FnYggS. The crystal structure of FnYggS showed a type III TIM barrel fold, exhibiting structural homology with several other PLP-dependent enzymes. Although FnYggS exhibited low (<35%) amino acid sequence similarity with previously studied YggS proteins, its overall structure and PLP-binding site were highly conserved. In the PLP-binding site of FnYggS, the sulfate ion was coordinated by the conserved residues Ser201, Gly218, and Thr219, which were positioned to provide the binding moiety for the phosphate group of PLP. The mutagenesis study showed that the conserved Ser201 residue in FnYggS was the key residue for PLP binding. These results will expand the knowledge of the molecular properties and function of the YggS family.