Effect of initial carbon sources on the electrochemical detection of glucose by Gluconobacter oxydans

An electrochemical system consisted of Gluconobacter oxydans as a microorganism and 2-hydroxy-1,4-naphthoquinone (HNQ) as a mediator has been setup to examine the effect of initial carbon sources on the detection of glucose. Catalytic current due to the oxidation of glucose was observed only when both G. oxydans and HNQ were present. From amperometric measurements, it was found that the sensitivity strongly depended on the initial carbon sources. The sensitivity was highest for the cells cultured in a fructose-containing medium and decreased in the order, mannitol > sucrose > glucose > galactose > glycerol. The difference in sensitivity was explained by considering the current rising pattern at an initial stage of a microbial fuel cell constructed with the same components. The rising time, not the fuel cell efficiency, could directly be related to the sensitivity order. A sensor where G. oxydans was confined at the vicinity of the electrode by the semipermeable membrane was constructed. A linear response over a millimolar range of glucose concentration was observed with a cell grown in galactose-containing medium. This work demonstrates that the initial carbon source play an important role on glucose sensoring and should be considered in a real application.     

Double-armed crown ethers: synergic pi-coordination effect on potentiometric sensing for Ag(I)

Three diaza-18-crown-6 derivatives having methyl (L1), methoxy (L2) and phenyl (L3) end-groups in para-substituted phenolic side-arms have been investigated as potentiometric sensing materials for silver(I)-selective poly(vinyl chloride) membrane electrodes. The aim of the present work is to establish whether a combination of macrocyclic coordination to Ag+ ion and Ag-pi interaction might produce synergic effect in Ag+ ion sensing. The electrode based on the aromatic end-groups, L3 was found to give remarkably better electrochemical performance than their aliphatic counterparts (L1 and L2). The sensing ability for Ag+ ion with the proposed electrode was enhanced noticeably due to the pi-coordination of Ag+ ion, which was elucidated by NMR. The present findings may serve as an alternative approach for designing advanced sensing materials.     

Synthesis and Crystal Structures of S 2 O 2 Macrocycle L, and its Silver(I) and Platinum(II) Complexes (Where L = 5,8-dioxa-2,11-dithia-[12]-o-cyclophane)

The S₂O₂-donor macrocycle, L(5,8-dioxa-2,11-dithia-[12]-o-cyclophane or 3,4-benzo-1,6-dithia-9,12-dioxocyclo-tetradecane-3-ene) was synthesized by ring closure reaction of 2,2'-(ethylenedioxy)diethanethiol with ,'-dibromo-o-xyleneunder high dilution and crystallized from methanol. The X-ray structure of L has a C₂ axis and is shown to have two S atoms oriented exodentate and two O atoms positionedendodentate to the ring cavity. Reaction of AgNO₃ with L affords monomeric [Ag(L)(NO₃)], (1)in which the Ag atom is in a distorted trigonal plane coordinated by two S atoms in a ring and to one O atom from the NO₃ ^- ion. The behavior of complex 1 in solution was also characterized by NMR titration. Reaction between K₂PtCl₄ and L affords [Pt(L)Cl₂], (2) in which the Pt atom has a distorted square-planar environment, coordinated to two S atoms of Land to two Cl^- ions in a cis arrangement.     

Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.     

Exploiting poly(dimethylsiloxane)-modified tips to evaluate frictional behavior by friction force microscopy

With the aim of investigating the effect of the surface properties on the friction behavior of self-assembled monolayers, we have modified tipless atomic force microscopy (AFM) cantilevers with a poly(dimethylsiloxane) (PDMS) lens. The friction coefficient using the silicon tip is strongly influenced by the mechanical properties of the substrate monolayer because hard, sharp silicon tips penetrate the surface of organic monolayers. However, the friction coefficient obtained for the PDMS-modified AFM cantilever is mostly due to the surface properties of the monolayer functional end group, rather than the viscoelastic deformation of the monolayer. The use of the PDMS tip was demonstrated as a novel means to investigate the effect of surface properties on the frictional behavior of self-assembled monolayers with various functional groups with less mechanical deformation.     

Separation of racemic 2,4-dinitrophenyl amino acids on 9-O-(phenyloxycarbonyl)quinine-bonded carbon-clad zirconia in reversed-phase liquid chromatography

Zirconia is known to be one of the best materials for the chromatographic support due to its excellent chemical, thermal, and mechanical stability. In this work, we report preparation and use of 9-O-(phenyloxycarbonyl)quinine-bonded carbon-clad zirconia (QNCZ) as a chiral stationary phase (CSP) for separation of N-(2,4-dinitrophenyl) (DNP)-amino acids (AAs) enantiomers in reversed-phase liquid chromatography. Retention and enantioselectivity of the QNCZ CSP were compared with those of quinine 3-triethoxysilylpropylcarbamate-coated zirconia (QNZ) and quinine 3-triethoxysilylpropylcarbamate-bonded silica (QNS). The QNCZ CSP showed in general the better enantioselectivity for most of the amino acids studied.     

Chiral bisphosphinite metalloligands derived from a P-chiral secondary phosphine oxide

Interaction of PdCl(2)(MeCN)(2) with 2 equiv of (S(P))-(t)BuPhP(O)H (1H) followed by treatment with Et(3)N gave [Pd((1)(2)H)](2)(micro-Cl)(2) (2). Reaction of 2 with Na[S(2)CNEt(2)] or K[N(PPh(2)S)(2)] afforded Pd[(1)(2)H](S(2)CNEt(2)) (3) or Pd[(1)(2)H)[N(PPh(2)S)(2)] (4), respectively. Treatment of 3 with V(O)(acac)(2) (acac = acetylacetonate) and CuSO(4) in the presence of Et(3)N afforded bimetallic complexes V(O)[Pd(1)(2)(S(2)CNEt(2))](2) (5) or Cu[Pd(1)(2)(S(2)CNEt(2))](2) (6), respectively. X-ray crystallography established the S(P) configuration for the phosphinous acid ligands in 3 and 6, indicating that 1H binds to Pd(II) with retention of configuration at phosphorus. The geometry around Cu in 6 is approximately square planar with the average Cu-O distance of 1.915(3) A. Treatment of 2 with HBF(4) gave the BF(2)-capped compound [Pd((1)(2)BF(2))](2)(micro-Cl)(2) (7). The solid-state structure of 7 containing a PdP(2)O(2)B metallacycle has been determined. Chloride abstraction of 7 with AgBF(4) in acetone/water afforded the aqua compound [Pd((1)(2)BF(2))(H(2)O)(2)][BF(4)] (8) that reacted with [NH(4)](2)[WS(4)] to give [Pd((1)(2)BF(2))(2)](2)[micro-WS(4)] (9). The average Pd-S and W-S distances in 9 are 2.385(3) and 2.189(3) A, respectively. Treatment of [(eta(6)-p-cymene)RuCl(2)](2) with 1H afforded the phosphinous acid adduct (eta(6)-p-cymene)RuCl(2)(1H) (10). Reduction of [CpRuCl(2)](x)() (Cp = eta(5)-C(5)Me(5)) with Zn followed by treatment with 1H resulted in the formation of the Zn(II) phosphinate complex [(CpRu(eta(6)-C(6)H(5)))(t)BuPO(2))](2)(ZnCl(2))(2) (11) that contains a Zn(2)O(4)P(2) eight-membered ring.     

Pyrene-appended calix[4]crowned logic gates involving normal and reverse PET: NOR, XNOR and INHIBIT

As a novel sensing system, N-(1-pyrenylmethyl) amide-appended calix[4]crown-5 (2) and crown-6 (3) have been newly synthesized. Judging from the fluorescence changes upon the addition of cations, 3 having crown-6 ring showed the Pb²⁺ ion selectivity over other cations tested regarding fluorescence quenching. Upon the Pb²⁺ ion coordination to two amide oxygen atoms with aid of crown ring, a reverse-photo-induced electron transfer (PET) occurs in such a way that electrons transfer from the pyrene groups to the electron deficient amide oxygen atoms to give a quenched fluorescence. By the addition of either HClO₄ or triethylamine in the solution of 3, the fluorescence intensity decreased because of the reverse-PET from pyrene groups to protonated amide oxygen atoms and because of normal PET from the nitrogen anion formed by triethylamine to pyrene groups, respectively. For 3, NOR logic gate in which the strong fluorescence signal appears at 395 nm (output: 1) is operated only when neither of triethylamine nor Pb(ClO₄)₂ (inputs A and B) is added (A=B: 0). XNOR gate is also operated only when both of two inputs are added (triethylamine and HClO₄, A=B: 1) or when neither of two inputs is added (A=B: 0). Then, for 3, new INHIBIT gate system was also designed using such combinational inputs as HClO₄, Pb(ClO₄)₂ and triethylamine.     

Controlling mammalian cell interactions on patterned polyelectrolyte multilayer surfaces

A newly discovered class of cell resistant surfaces, specifically engineered polyelectrolyte multilayers, was patterned with varying densities of adhesion ligands to control attachment of mammalian cells and to study the effects of ligand density on cell activity. Cell adhesive patterns were created on cell resistant multilayer films composed of poly(acrylic acid) and polyacrylamide through polymer-on-polymer stamping of poly(allylamine hydrochloride) PAH and subsequent reaction of the amine functional groups with an adhesion ligand containing RGD (Arg-Gly-Asp). These cell patterns demonstrated great promise for long-term applications since they remained stable for over 1 month, unlike ethylene glycol functional surfaces. By changing the stamping conditions of PAH, it was possible to alter the number of available functional groups in the patterned regions, and as a result, control the ligand density. Cell spreading, morphology, and cytoskeletal organization were compared at four different RGD densities. The highest RGD density, approximately 152 000 molecules/microm2, was created by stamping PAH at a pH of 11.0. Lowering the stamping ink pH led to patterns with lower ligand surface densities (83 000 molecules/microm2 for pH 9.0, 53,000 molecules/ microm2 for pH 7.0, and 25 000 molecules/microm2 for pH 3.5). An increasing number of cells attached and spread as the RGD density of the patterns increased. In addition, more cells showed well-defined actin stress fibers and focal adhesions at higher levels of RGD density. Finally, we found that pattern geometry affected cytoskeletal protein organization. Well-formed focal adhesions and cell-spanning stress fibers were only found in cells on wider line patterns (at least 25 microm in width).