Preparation of soluble and fusible poly(2,5-dimethoxy-1,4-phenylene)

Poly(2,5-dimethoxy-1,4-phenylene) was prepared by oxidative polymerization of p-dimethoxybenzene with aluminum chloride and copper(II) chloride in nitrobenzene under reduced pressure. The polymers obtained were soluble in sulfuric acid and fusible at 320°C. The intrinsic viscosity of the polymer was ca. 0.07 in sulfuric acid. Demethylation of methoxy groups did not occur during the polymerization.     

Apparent contrast of an atmosphere-ocean system with an oil polluted sea surface

To obtain the optical thickness of the ocean and detect the pollution of the sea surface remotely by satellite, the intensity of radiation from the model atmosphere-ocean is calculated in terms of the superposition method. Reflection and refraction at the sea surface are taken into account as well as the multiple scattering and absorption in both atmosphere and ocean. It is shown that the visibility of oil polluted ocean is higher than that of uncontaminated ocean, and based on this enhancement of the visibility (or apparent contrast of oil slicks), sea pollution could be detected from space.     

Lateral displacement by transient mobility in chemisorption of CO on Pt(997)

We investigated adsorbed states of CO on Pt(997) at 11 K using infrared reflection absorption spectroscopy. At 11 K, thermal migration is suppressed and thus the initial chemisorption at terrace sites and step sites is controlled by the transient mobility of the adsorbing molecule. The initial occupation ratio between atop CO on the terrace and atop CO at the step is directly determined to be 3.6:1. With a simple isotropic migration model, we estimated the mean lateral displacement from the first impact point to the initial chemisorption site to be 6.8 A. We also discuss the origin of transient mobility of CO on metal surfaces.     

Co2(CO)8-mediated endo mode cyclization of epoxy-alcohol: synthesis of 2-ethynyl-3-hydroxy-2-methyltetrahydropyran and 2-ethynyl-3-hydroxy-3-methyltetrahydropyran derivatives

Successive treatment of 4,5-epoxy-5-methyl-7-trimethylsilyl-6-heptyne-1-ol with Co2(CO)8 at 0 degrees C and a catalytic amount of BF3 x OEt2 at -78 degrees C gave the tetrahydropyran derivatives with the cobalt-complexed moiety. Similarly 4,5-epoxy-4-methyl-7-trimethylsilyl-6-heptyne-1-ol underwent ring closure under the above conditions to provide the corresponding tetrahydropyran derivatives. The preferential endo mode cyclization over the exo one was observed in these experiments.     

Numerical analysis of turbulent flow separation in a rectangular duct with a sharp 180‐degree turn by algebraic Reynolds stress model

Turbulent flow in a rectangular duct with a sharp 180‐degree turn is difficult to predict numerically because the flow behavior is influenced by several types of forces, including centrifugal force, pressure‐driven force, and shear stress generated by anisotropic turbulence. In particular, this type of flow is characterized by a large‐scale separated flow, and it is difficult to predict the reattachment point of a separated flow. Numerical analysis has been performed for a turbulent flow in a rectangular duct with a sharp 180‐degree turn using the algebraic Reynolds stress model. A boundary‐fitted coordinate system is introduced as a method for coordinate transformation to set the boundary conditions next to complicated shapes. The calculated results are compared with the experimental data, as measured by a laser‐Doppler anemometer, in order to examine the validity of the proposed numerical method and turbulent model. In addition, the possibility of improving the wall function method in the separated flow region is examined by replacing the log‐law velocity profile for a smooth wall with that for a rough wall. The analysis results indicated that the proposed algebraic Reynolds stress model can be used to reasonably predict the turbulent flow in a rectangular duct with a sharp 180‐degree turn. In particular, the calculated reattachment point of a separated flow, which is difficult to predict in a turbulent flow, agrees well with the experimental results. In addition, the calculation results suggest that the wall function method using the log‐law velocity profile for a rough wall over a separated flow region has some potential for improving the prediction accuracy. Copyright © 2007 John Wiley & Sons, Ltd.     

Production of core/shell polystyrene/poly(3,5-xylidine) composite particles by chemical oxidative seeded dispersion polymerization

Micron-sized monodispersed polystyrene (PS)/poly(3,5-xylidine) (PXy) composite particles were produced by chemical oxidative seeded dispersion polymerization of 3,5-xylidine at 20 °C with 1.6-μm-sized monodispersed PS seed particles in HCl aqueous solution, the pH of which was always kept at 2.5 with a pH stat. The composite particles produced consisted of a PS core and a PXy shell. Received: 16 December 1998 Accepted in revised form: 25 March 1999     

A travelling-wave beam deflector cleave-coupled to a diode laser

A new technique for scanning a diode laser beam is introduced where the beam is deflected in a current-injection-type travelling-wave beam deflector integrated with a diode laser. The deflector, which is formed outside the laser cavity, is cleave-coupled to the cavity. An anti-reflection coating on the deflector output facet suppresses the light returning to the laser. As a result, very smooth deflection of the radiation peak with low background intensity is realized in this device, while retaining high efficiency and low threshold current.     

Aragonite twinning in gastropod nacre

Aragonite twinning in gastropod nacre has been investigated using scanning electron microscopy (SEM), electron back-scattered diffraction (EBSD), and transmission electron microscopy (TEM) with the focused ion beam (FIB) sample preparation technique. At the growth front of nacre, Haliotis discus hannai and Omphalius rusticus form a “stack-of-coins” structures, which consist of pseudo-hexagonal and elliptical aragonite tablets, respectively. SEM, EBSD, and TEM analyses revealed that these tablets are monolithic single crystal and almost free of the {1 1 0} twins that are common in aragonite of biotic or abiotic origin. The longest diagonal of the hexagon and the longer axis of the ellipse are parallel to the a-axis of aragonite. The crystal orientation of each tablet in a stack, measured by TEM-Kikuchi pattern analysis, is almost the same but there is occasionally {1 1 0} twin-like relationship between adjacent tablets along the stacking. On the other hand, the fibrous aragonite layer formed prior to the nacreous structure is composed of polycrystalline aragonite with high density of {1 1 0} twins. TEM observation suggests that the interlamellar organic sheet prevents the inheritance of the twins, by selecting only single domain of the twins, through the mineral bridge.