Pervaporation from a dense membrane: roles of permeant-membrane interactions, Kelvin effect, and membrane swelling

Dense polymeric membranes with extremely small pores in the form of free volume are used widely in the pervaporative separation of liquid mixtures. The membrane permeation of a component followed by its vaporization on the opposite face is governed by the solubility and downstream pressure. We measured the evaporative flux of pure methanol and 2-propanol using dense membranes with different free volumes and different affinities (wettabilities and solubilities) for the permeant. Interestingly, the evaporative flux for different membranes vanished substantially (10-75%) below the equilibrium vapor pressure in the bulk. The discrepancy was larger for a smaller pore size and for more wettable membranes (higher positive spreading coefficients). This observation, which cannot be explained by the existing (mostly solution-diffusion type) models ofpervaporation, suggests an important role for the membrane-permeant interactions in nanopores that can lower the equilibrium vapor pressure. The pore sizes, as estimated from the positron annihilation, ranged from 0.2 to 0.6 nm for the dry membranes. Solubilities of methanol in different composite membranes were estimated from the Flory-Huggins theory. The interaction parameter was obtained from the surface properties measured by the contact angle goniometry in conjunction with the acid-base theory of polar surface interactions. For the membranes examined, the increase in the "wet" pore volume due to membrane swelling correlates almost linearly with the solubility of methanol in these membranes. Indeed, the observations are found to be consistent with the lowering of the equilibrium vapor pressure on the basis of the Kelvin equation. Thus, a higher solubility or selectivity of a membrane also implies stronger permeant-membrane interactions and a greater retention of the permeant by the membrane, thus decreasing its evaporative flux. This observation has important implications for the interpretation of existing experiments and in the separation of liquid mixtures by pervaporation.     

Potentiometric studies of ternary complex formation Cu(II), Ni, Zn or Cd iminodiacetic acid/amino-acid complexes

The formation constants, log K(mab), for the reactions MA + B right harpoon over left harpoon MAB [where M = Cu(II), Ni, Zn or Cd, A = terdentate ligand and B = bidentate or terdentate ligand] have been determined. Potentiometric evidence is presented for the stepwise addition of the secondary ligand B to the 1:1 metal iminodiacetate (MA). The formation constants and the free energies of formation (DeltaG) have been calculated at 25 +/- 1 degrees and mu = 0.10. The order in terms of secondary ligands has been found to be ASPA > Gly > Aln and Gly > Aln > ASPA with iminodiacetic and nitrilotriacetic acid as primary ligands respectively (ASPA = aspartic acid, Gly = glycine, Aln = dl-alanine). The plot of log K(mab) against log k(mb)(2) shows a linear relationship between the formation constants of the ternary and 1:2 M(II)secondary ligand complexes.     

Kinetics of oxidation of some disaccharides in ammoniacal medium

Kinetics of oxidation of lactose, maltose, cellobiose and melibiose has been studied by hexacyanoferrate(III) in the presence of ammonia. A general mechanism involving the formation of intermediate enodiol anion has been suggested. The effects of dielectric constant and salts have been studied in detail. The oxidation products have been characterised by descending paper chromatography. Compensation effects have been observed.     

pH-metric studies on some ternary complexes of lanthanones

Stepwise mixed ligand complex formation has been cited for the formation of 111,Ln(III)—NTA—catechol ternary complexes potentiometrically [whereLn(III)=La(III), Pr(III) or Nd(III)]. The results of titration curves indicate the formation of 11,Ln(III)—NTA complexes in beginning and the addition of catechol, takes place later on in the higher buffer region. The relative stability of these ternary complexes in terms of metal ion has been reported as La(III)< 相似文献   

Micellar electrokinetic capillary chromatographic separation and laser-induced fluorescence detection of 2'-deoxynucleoside 5'-monophosphates of normal and modified bases

Micellar electrokinetic chromatography is used to separate dansylated nucleotides, both normal and modified species. The high separation power allows detection of minor components present in less than 1 part per thousand of the major components. Laser-excited fluorescence is used to detect the separated components at the 6 x 10(-18) mol level or 10(-9) M injected material. Combined with high-performance liquid chromatographic enrichment prior to labeling, this technique can be used to assess DNA damage in carcinogenesis studies.     

Enhancement of distillate selectivity in Fischer-Tropsch synthesis by using iron and cobalt catalysts in a novel dual-bed reactor ?

Summary An integrated process for producing liquid fuels from synthesis gas via a two-stage Fischer-Tropsch (FT) reaction is disclosed. An iron catalyst was used in the first bed of a fixed-bed reactor followed by a ruthenium promoted cobalt catalyst in the second bed. The activity and selectivity of the dual-bed system were assessed and compared with those using catalysts in a single bed system, separately. The methane selectivity in the dual-bed reactor was about 11% less compared to that of the single-bed system. The C₅⁺ selectivity for the dual-bed reactor was 19.7% higher than that of the single-bed system.     

Polymerization of para-xylylene derivatives (parylene polymerization). I. Deposition kinetics for parylene N and parylene C

Kinetic aspects of parylene N [unsubstituted poly(para-xylylene)] and Parylene C [monochlorosubstituted poly(para-xylylene)] were studied. The conversion of starting material (dimer of either p-xylylene or chloro-para-xylylene) to polymer is quantitative (ca. 100%). Consequently, the total polymer formed in a closed system is directly proportional to the amount of dimer charged. However, the percentage of the total amount of polymer formed which deposits on substrate surfaces, placed in the deposition chamber, as well as the polymer film growth rate are dependent on operational factors such as the temperature of the substrate, sublimation of dimer temperature, flow pattern of the reactive species, etc. Parylene C, being a heavier and more polar molecule, has the tendency to deposit easily in the deposition chamber compared to the deposition of Parylene N. Parylene C also has a higher ceiling temperature for deposition than Parylene N. This situation has been investigated from the viewpoint of excess thermal energy which hinders polymer formation (deposition) due to the exceedingly high entropy change necessary for polymer deposition to occur. The addition of a cool (i.e., room temperature) inert gas was shown to increase the deposition of Parylene N on substrate surfaces placed in the deposition chamber. The deposition increase and acceleration of deposition (film growth) rate were found to be related to the size and molecular weight of the inert gas pressure maintained in the system. The accelerating effect is explained by the increase in third-body collisions to dissipate the excess thermal energy of the reactive species.     

The synthesis of N-substituted ketimines from oxazirdines

N-Unsubstituted diaryl, alkyl aryl and dialkyl ketimines are prepared in good yield at ambient temperature by the reaction of KOBu^t on oxaziridines having an α-hydrogen atom on the N-alkyl substituent; the mechanism and stereochemistry of the reaction are discussed.     

Deoxygenation of sulfoxides, selenoxides, telluroxides, sulfones, selenones and tellurones with Mg-MeOH

The deoxygenation of a variety of sulfoxides, selenoxides, telluroxides, sulfones, selenones and tellurones has been reported with Mg-MeOH at room temperature in nearly quantitative yields. The deoxygenation is proposed to proceed by SET from Mg to the substrate.     

New ruthenium-based protocol for cleavage of terminal olefins to primary alcohols: improved synthesis of a bicyclic nucleoside

A new protocol for the oxidative cleavage of terminal alkenes to give exclusively primary alcohols in high yields is introduced. The protocol is based on RuO4-mediated dihydroxylation, NaIO4-mediated diol cleavage, and NaBH4-mediated reduction, but the introduction of a reducing step before the diol cleavage removes the formation of byproducts and improves the yield significantly. The new protocol has been developed and used for the improved preparation of a [3.2.0]bicycloarabinonucleoside with important potential in antisense and antigene technology.