Synthesis and characterization of microencapsulated dicyclopentadiene with melamine–formaldehyde resins

Microcapsules containing healing agents have been used to develop the self-healing polymeric composites. These microcapsules must possess special properties such as appropriate strength and stability in surrounding medium. A new series of microcapsules containing dicyclopentadiene (DCPD) with melamine–formaldehyde (MF) resin as shell material were synthesized by in situ polymerization technology. These microcapsules may satisfy the requirements for self-healing polymeric composites. The chemical structure of microcapsule was identified by using Fourier transform infrared (FTIR) spectrometer. The morphology of microcapsule was observed by using optical microscope (OM) and scanning electron microscope. Size distribution and mean diameter of microcapsules were determined with OM. The thermal properties of microcapsules were investigated by using thermogravimetric analysis and differential scanning calorimetry. Additionally, the self-healing efficiency was evaluated. The results indicate that the poly(melamine–formaldehyde) (PMF) microcapsules containing DCPD have been synthesized successfully, and their mean diameters fall in the range of 65.2∼202.0 μm when the adjusting agitation rate varies from 150 to 500 rpm. Increasing the surfactant concentration can decrease the diameters of microcapsules. The prepared microcapsules are thermally stable up to 69 °C. The PMF microcapsules containing DCPD can be applied to polymeric composites to fabricate the self-healing composites.     

Synthesis,crystal structure,electrochemical properties and large optical limiting effect of a novel 3-(E)-ferrocenyl-vinyl-<Emphasis Type="BoldItalic">N</Emphasis>-hexyl carbazole

The novel compound, 3-(E)-ferrocenyl-vinyl-N-hexylcarbazole (FVHC) was first synthesized and fully characterized by elemental analysis, IR, ¹H-NMR, single-crystal X-ray diffraction, ultraviolet (UV) absorption, cyclic voltammograms (CV) and optical limiting (OL) measurements. The result of single crystal X-ray diffraction for the compound reveals that the ferrocenyl and carbazole groups are approximately coplanar, and bridged by double-bond with E configuration, showing that there is a well-delocalized π-electron system in the molecule. The electrochemical investigation indicated that the electron in the FVHC may partially be delocalized over the π-conjugated system and CT process in functionalized carbazole systems. Besides, the compound exhibited strong UV absorption and large optical limiting effect, indicating promising potential applications as useful OL materials.     

Highly efficient synthesis of isoquinolines via nickel-catalyzed annulation of 2-iodobenzaldimines with alkynes: evidence for dual pathways of alkyne insertion

[reaction: see text] A wide range of substituted isoquinolines were synthesized via a highly efficient nickel-catalyzed annulation of the tert-butyl imines of 2-iodobenzaldehydes and various alkynes; examination of the regiochemistry of isoquinolines synthesized indicates that there are two different alkyne insertion pathways for the catalytic reactions.     

Carbon nanotube array-based biosensor

Aligned multi-wall carbon nanotubes (MWNT) grown on platinum substrate are used for the development of an amperometric biosensor. The opening and functionalization by oxidation of the nanotube array allows for the efficient immobilization of the model enzyme, glucose oxidase. The carboxylated open-ends of nanotubes are used for the immobilization of the enzymes, while the platinum substrate provides the direct transduction platform for signal monitoring. It is also shown that carbon nanotubes can play a dual role, both as immobilization matrices and as mediators, allowing for the development of a third generation of biosensor systems, with good overall analytical characteristics.     

酞菁氧钛/卟啉氧钒复合体系光导性能的协同增强效应

在酞菁氧钛（TiOPc)／卟啉氧钒（VOTPP）复合光生材料中发现了光敏性的非线性增强现象，对复合体系的电子跃迁光谱和X射线衍射图的研究结果表明，在基态下两种材料之间没有明显相互作用，光致放电研究说明，该现象来自光激发状态下复合体系中的隙间态跃迁对光导的贡献，XPS测试结果表明酞菁氧钛与卟啉氧钒分子之间存在着定向的部分电荷转移，光致激发状态下的电荷转移是协同增强效应的起因，这种协同增强效应为利用弱的电子给体与弱的受体复合体系设计新型光导材料与器件提供了新方法。     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

Tweezer分子的合成和对有机阴离子的配位效应

本文报道新的Ｔｗｅｅｚｅｒ（１）的合成，用＾１ＨＮＭＲ研究了新的Ｔｗｅｅｚｅｒ分子和对硝基苯甲酸盐的配位效应，结果表明它兴通过氢键，静电引力和芳环夹心堆叠作用而自动缔合。     

Binary mixtures based on polycaprolactone and cellulose derivatives

Pyrolytic process has a promising potential for the environmentally friendly upgrading of lignocellulosic and plastic waste. Thermogravimetry and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) were used to get information about the reactive decomposition of PCL in binary mixtures with microcrystalline cellulose (MC) or sisal fibres (SF). Preliminary thermogravimetric investigation showed that biomass is thermally degraded at lower temperatures than PCL and this process has a predominant influence on the thermal behaviour of the mixtures. Discrepancies between the experimental and predicted TG/DTG profiles were considered as a measurement of the extent of interactions occurring on co-pyrolysis. It was found that reactivity of PCL was slightly increased in PCL-SF binary mixtures. Evolution of acidic products from cellulose and hemicelluloses decomposition may promote PCL degradation in binary mixtures with SF. It seems that the co-pyrolysis process could have potential for the environmentally friendly transformation of biocomposites.     

二维DNA晶体的程序化设计与自组装的研究进展

按照Watson-Crick的碱基配对原则，在理论上能够人工设计与合成DNA碱基序列并自组装成任何一维和二维结构的DNA晶体。DNA分子这种底端向上(bottom-up)的自组装模式为我们提供了一种精确合成纳米材料的方法。本文将从程序化设计、合成刚性的DNA分子瓦(DNA tile)、分子瓦自组装成二维DNA晶体以及二维DNA晶体作为模板在纳米技术中的应用等方面展开，简述这一新奇的并且有着潜在应用前景的研究领域的最新进展。     

Cellulase Activity in Different Buffering Media During Waste Paper Hydrolysis by HPLC

The activity of cellulase has traditionally been described by pH and temperature; however, the buffering medium is also an important factor, Taking plain water as a reference medium, three kinds of buffer including KH₂PO₄/K₅HPO₄, citric acid/sodium citrate, and acetic acid/sodium acetate were adopted to survey their effects on the activity of cellulase. Chromatographic assays indicated that xylose, glucose, and cellobiose were the major products and that minor products such as cellotriose and cellotetraose were present in some cases. The activities of cellulase based on glucose production showed that the phosphate buffer acted as a deactivator for cellulase and each of the two organic acid buffers acted as activators for cellulase. The concentration of activation buffer should be high to reach a high cellulase activity; however, this effect would be compensated for by the product inhibition of cellulase. The highest activity obtained was 4.16 ± 0.08 (× 10^?3) IU mg^?1 for the citric acid/sodium citrate buffer under pH 4.80, 40 °C and an agitation speed of 150 rpm.