Adsorption of triton X-100 on silica gel: effects of temperature and alcohols

Adsorption of Triton X-100 (TX-100) on silica gel has been studied as a function of temperature (308–328 K) and composition for mixtures of water with ethanol or t-butanol. The adsorption capacity of silica gel for TX-100 decreases with increase in alcohol content. Adsorption isotherms of TX-100 on silica gel are four-region and were analyzed using the ARIAN (adsorption isotherm regional analysis) model. Data in regions 2, 3 and 4 were fitted to the Temkin, bilayer and reverse desorption isotherms, respectively. The results show that adsorption of TX-100 on silica gel in water and alcohol-water binary mixtures occurs mainly through formation of monolayer surface aggregates or low bilayer coverage.      

An efficient ultrasonic-assisted synthesis of ethyl-5-(aryl)-2-(2-alkokxy-2-oxoethylidene)-7-methyl-3-oxo-3, 5-dihydro-2H-thiazolo [3, 2-a] pyrimidine-6-carboxylate derivatives

Dihydropyrimidinone derivatives were prepared by tri-component reaction of ethyl aceto acetate, aldehydes and thiourea in the presence of modified montmorillonite nanostructure as a catalyst and used as key intermediates for the synthesis of ethyl-5-(aryl)-2-(2-alkokxy-2-oxoethylidene)-7-methyl-3-oxo-3,5-dihydro-2H-thiazolo[3,2-a]pyri midine-6-carboxylate derivatives with use of diethyl and dimethyl acetylene dicarboxylate by two methods: (a) in methanol as a solvent under ultrasonic irradiation at ambient temperature (b) in methanol as a solvent at ambient temperature (conventional magnetic stirring). Ultrasound-assisted synthesis provides excellent yields in short reaction times (15–25 min) at room temperature.     

MgO Nanoparticles as a Recyclable Heterogeneous Catalyst for the Synthesis of Polyhydroquinoline Derivatives under Solvent Free Conditions

Magnesium oxide nanopartticels in average size between 35–120 nm were prepared by sonochemistry method. Synthesis of polyhydroquinoline derivatives using MgO nanoparticles from the reaction of dimedone, benzaldehyde, ethyl acetoacetate and ammonium acetate under solvent‐free conditions is reported. Easy handling, reusability, thermal stability and non‐toxicity of the catalyst make the present protocol as an eco‐friendly and economically acceptable method for synthesis of these heterocycles.     

One-pot three-component process for the synthesis of substituted pyrano[2,3-<Emphasis Type="Italic">c</Emphasis>]pyrazoles catalyzed by nanostructured FSM-16-SO<Subscript>3</Subscript>H

A three-component process for the one-pot synthesis of 6-amino-4-aryl-5-cyano-3-methyl-1-phenyl-1,4-dihydropyrano[2,3-c]pyrazoles by the reaction of aldehydes, 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one, and malononitrile in the presence of FSM-16-SO₃H as an efficient mesoporous catalyst. The FSM-16-SO₃H was prepared and characterized by SEM, XRD, BET, and FT-IR techniques. The advantages of the presented method are high yields, short reaction times, easy purification of products, easy work-up, and reusability of the catalyst.     

Preparation of Nano Silica Supported Sodium Hydrogen Sulfate: As an Efficient Catalyst for the Trimethyl,Triethyl and t‐Butyldimethyl Silylations of Aliphatic and Aromatic Alcohols in Solution and under Solvent‐free Conditions

Nano silica supported sodium hydrogen sulfate has been prepared by mixing NaHSO₄ with activated Nano silicagel. We wish to report a new method for the synthesis of trimethyl (TMS), triethyl (TES) and t‐butyldimethyl silyl (TBS) ethers from benzylic, allylic, propargylic alcohols, phenols, naphtholes and some of phenolic drugs in the solution and under solvent‐free conditions.     

Antibacterial and antibiofilm activity of nanochelating based silver nanoparticles against several nosocomial pathogens

The emergence of multi‐drug resistant (MDR) bacteria and dynamic pattern of infectious diseases demand to develop alternative and more effective therapeutic strategies. Silver nanoparticles (AgNPs) are among the most widely commercialized engineered nanomaterials, because of their unique properties and increasing use for various applications in nanomedicine. This study for the first time aimed to evaluate the antibacterial and antibiofilm activities of newly synthesized nanochelating based AgNPs against several Gram‐positive and ‐negative nosocomial pathogens. Nanochelating technology was used to design and synthesize the AgNPs. The cytotoxicity was tested in human cell line using the MTT assay. AgNPs minimal inhibitory concentration (MIC) was determined by standard broth microdilution. Antibiofilm activity was assayed by a microtiter‐plate screening method. The two synthesized AgNPs including AgNPs (A) with the size of about 20‐25 nm, and AgNPs (B) with 30‐35 nm were tested against Staphylococcus aureus, Staphylococcus epidermidis, Acinetobacter baumannii, and Pseudomonas aeruginosa. AgNPs exhibited higher antibacterial activity against Gram‐positive strains. AgNPs were found to significantly inhibit the biofilm formation of tested strains in concentration 0.01 to 10 mg/mL. AgNPs (A) showed significant effective antibiofilm activity compared to AgNPs (B). In summary, our results showed the promising antibacterial and antibiofilm activity of our new nanochelating based synthesized AgNPs against several nosocomial pathogens.     

Response surface methodology for modelling and determination of catechin in Pistachio green hull using surfactant-based dispersive liquid–liquid microextraction followed by UV–Vis spectrophotometry

A rapid and simple approach for the preconcentration and determination of catechin from pistachio green hull samples has been proposed by surfactant-assisted dispersive liquid–liquid microextraction followed by UV–Vis spectrophotometry (SADLLME/UV–Vis). This method involved the formation of a catechin complex with cetylpyridinium chloride (CPC) as cationic surfactant, and subsequently, DLLME was applied to extract the catechin–CPC complex into chloroform. Different parameters affected the extraction efficiency were optimized by central composite design (CCD) and response surface methodology (RSM). In optimum condition, the calibration curve was linear in the range of 0.4–5 µg mL^??1 of catechin with correlation coefficient of 0.9982. The relative standard deviation based on five replicated analyses of 1 µg mL^??1 catechin was 1.85%. The proposed method was successfully applied for preconcentration and determination of trace amounts of catechin in pistachio hull samples.     

A simple accurate model for prediction of deflagration temperature of energetic compounds

A novel general method is introduced to predict deflagration temperature of organic energetic compounds containing at least –NNO₂, –ONO₂, or –CNO₂ groups. Deflagration temperature is an important safety parameter in working with dangerous energetic compounds and their environmental problems. It is shown that the contribution of some molecular structure parameters can be used to interpret thermal decomposition of an energetic compound. For 86 energetic materials (corresponding to 102 measured values) with different molecular structures, the new correlation has the root mean square (rms) and the average deviations of 23.8 and 19.0 K, respectively. The new method is also tested for some energetic compounds with complex molecular structures, e.g., two new organic energetic molecules N,N′-bis(1,2,4-triazol-3yl)-4,4′-diamino-2,2′,3,3′,5,5′,6,6′-octanitroazobenzene (BTDAONAB) and 2,4,6-trinitrophloroglucinol.     

A green and efficient procedure for one-pot synthesis of xanthenes and acridines using silica boron–sulfuric acid nanoparticles (SBSANs) as a solid Lewis-protic acid

Silica boron–sulfuric acid nanoparticles (SBSANs) as a solid Lewis-protic acid have been found to be an efficient heterogeneous catalyst in the synthesis of xanthene and acridine derivatives. The SBSAN-catalyzed reaction between carbonyl compound (aldehyde/ketone/ethyl orthoformate) and 5,5-dimethyl-1,3-cyclohexanedione (dimedone) for synthesis of xanthene derivatives is performed under mild conditions with the excellent isolated yield. Also, we can apply a broad scope of carbonyl compounds and amines for efficient synthesis of various acridine derivatives in the presence of SBSAN catalyst. In these multicomponent approaches the SBSAN catalyst can be reused for several times without any treatment in its catalytic activity.