Tunneling currents that increase with molecular elongation

We present a model molecular system with an unintuitive transport-extension behavior in which the tunneling current increases with forced molecular elongation. The molecule consists of two complementary aromatic units (1,4-anthracenedione and 1,4-anthracenediol) hinged via two ether chains and attached to gold electrodes through thiol-terminated alkenes. The transport properties of the molecule as it is mechanically elongated in a single-molecule pulling setting are computationally investigated using a combination of equilibrium molecular dynamics simulations of the pulling with gDFTB computations of the transport properties in the Landauer limit. Contrary to the usual exponential decay of tunneling currents with increasing molecular length, the simulations indicate that upon elongation electronic transport along the molecule increases 10-fold. The structural origin of this inverted trend in the transport is elucidated via a local current analysis that reveals the dual role played by H-bonds in both stabilizing π-stacking for selected extensions and introducing additional electronic couplings between the complementary aromatic rings that also enhance tunneling currents across the molecule. The simulations illustrate an inverted electromechanical single-molecule switch that is based on a novel class of transport-extension behavior that can be achieved via mechanical manipulation and highlight the remarkable sensitivity of conductance measurements to the molecular conformation.     

The Preparation and Properties of Titanium Dioxide Pigments with Acidic Surfaces

Titanium dioxide pigments used in commercial polymers are generally coated with a neutral, alumina/silica gel-coat to improve the pigment physical properties and also to reduce the chemical activity of the titania surface. Production of an acidic alumina/silica coating on titania pigments gives them a chemical activity similar to that previously found in dry clays. This activity is sufficient to increase greatly the bonding of basic organic materials to the pigment surfaces. The enhanced bonding can lead to materials with highly organophilic surfaces. The property changes in polymer composites brought about by these acidic pigments are discussed.     

Electronic structure and reactivity of high-spin iron--alkyl- and--pterinperoxo complexes

The spectroscopic properties and electronic structure of the four-coordinate high-spin [FeIII(L3)(OOtBu)]+ complex (1; L3 = hydrotris(3-tert-butyl-5-isopropyl-1-pyrazolyl)borate; tBu = tert-butyl) are investigated and compared to the six-coordinated high-spin [Fe(6-Me3TPA)(OHx)(OOtBu)]x+ system (TPA = tris(2-pyridylmethyl)amine, x = 1 or 2) studied earlier [Lehnert, N.; Ho, R. Y. N.; Que, L., Jr.; Solomon, E. I. J. Am. Chem. Soc. 2001, 123, 12802-12816]. Complex 1 is characterized by Raman features at 889 and 830 cm-1 which are assigned to the O-O stretch (mixed with the symmetric C-C stretch) and a band at 625 cm-1 that corresponds to nu(Fe-O). The UV-vis spectrum shows a charge-transfer (CT) transition at 510 nm from the alkylperoxo pi v* (v = vertical to C-O-O plane) to a d orbital of Fe(III). A second CT is identified from MCD at 370 nm that is assigned to a transition from pi h* (h = horizontal to C-O-O plane) to an Fe(III) d orbital. For the TPA complex the pi v* CT is at 560 nm while the pi h* CT is to higher energy than 250 nm. These spectroscopic differences between four- and six-coordinate Fe(III)-OOR complexes are interpreted on the basis of their different ligand fields. In addition, the electronic structure of Fe-OOPtn complexes with the biologically relevant pterinperoxo ligand are investigated. Substitution of the tert-butyl group in 1 by pterin leads to the corresponding Fe(III)-OOPtn species (2), which shows a stronger electron donation from the peroxide to Fe(III) than 1. This is related to the lower ionization potential of pterin. Reduction of 2 by one electron leads to the Fe(II)-OOPtn complex (3), which is relevant as a model for potential intermediates in pterin-dependent hydroxylases. However, in the four-coordinate ligand field of 3, the additional electron is located in a nonbonding d orbital of iron. Hence, the pterinperoxo ligand is not activated for heterolytic cleavage of the O-O bond in this system. This is also evident from the calculated reaction energies that are endothermic by at least 20 kcal/mol.     

Heterogeneous hydride generation in a packed membrane cell

Summary Volatilization of arsenic, selenium and antimony for sample introduction in atomic absorption spectrometry has been performed by pumping an acidic sample through an anion exchanger in the tetrahydroborate (III) form packed as a bed in the liquid channel of a gas-liquid separation membrane cell. The hydrides generated in the heterogeneous reaction between bound tetrahydroborate (III) ions and the analytes are rapidly transferred with the aid of the concomitantly generated hydrogen gas through the gas-permeable membrane into the gas phase and swept to the spectrometer by an additional hydrogen gas flow. This instant transfer of the hydrides to the gas phase kinetically discriminates the reaction of the hydride with metal borides and metal colloids, whose formation by reaction with tetra-hydroborate (III) is slower than the hydride reaction. The susceptibility to interference by transition metal ions is thus markedly reduced, as compared with both batch hydride generation methods and a previously presented heterogeneous reaction scheme. The detection limits for arsenic, selenium, and antimony were 1.2, 3.7, and 10 g/l, respectively. The calibration graphs were linear from the detection limit up to 125 g/l for arsenic, 150 g/l for selenium, and 250 g/l for antimony. The relative standard deviations at concentration levels of 10 and 100 g/l were 1.8 and 0.7% for arsenic and 2.3 and 1.2% for selenium. Corresponding figures for 50 and 100 g/l antimony were 2.5 and 1.6%.     

Chemistry of novolac resins. X. Polymerization studies of HMTA and strategically synthesized model compounds

The reactions between hexamethylenetetramine (HMTA) and compounds which model novolac resins have been studied by ¹³C‐ and ¹⁵N‐NMR techniques. The dimer and tetramer compounds vary in molecular size and structure and react with HMTA to yield benzylamines and benzoxazine as the major initial‐formed intermediates and convert to methylene linked compounds at increased temperatures. The reaction of the compounds with only ortho reactive sites paralleled the 2,4‐xylenol–HMTA case reported by us previously; however, increasing molecular weight favored the formation of benzylamines and not benzoxazines. Those compounds with only para reactive sites paralleled the 2,6‐xylenol–HMTA case. The reactivity of the systems containing both ortho and para reactive sites depends on the ratio of ortho/para sites and various aspects such as the chemical structure and molecular weight of the compound, the HMTA level, and the melting point and pH of the system. These results parallel those obtained from novolac/HMTA systems. The xylenol/HMTA reactions formed similar products but showed quite different relative reaction rates by varying the HMTA ratio and structures of the materials. The importance of careful selection of model systems is also discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1347–1355, 1999     

S K-edge X-ray absorption studies of tetranuclear iron-sulfur clusters: mu-sulfide bonding and its contribution to electron delocalization.

X-ray absorption spectroscopy (XAS) at the sulfur ( approximately 2470 eV) and chlorine ( approximately 2822 eV) K-edges has been applied to a series of 4Fe-4S model complexes. These are compared to 2Fe-2S model complexes to obtain insight into the localized ground state in the mixed-valence dimer versus the delocalized ground state in the mixed-valence tetramer. The preedges of hypothetical delocalized mixed-valence dimers [Fe(2)S(2)](+) are estimated using trends from experimental data and density functional calculations, for comparison to the delocalized mixed-valence tetramer [Fe(4)S(4)](2+). The differences between these two mixed-valence sites are due to the change of the sulfide-bridging mode from micro(2) to micro(3). The terminal chloride and thiolate ligands are used as spectator ligands for the electron density of the iron center. From the intensity of the preedge, the covalency of the terminal ligands is found to increase in the tetramer as compared to the dimer. This is associated with a higher effective nuclear charge on the iron in the tetramer (derived from the energies of the preedge). The micro(3)-bridging sulfide in the tetramer has a reduced covalency per bond (39%) as compared to the micro(2)-bridging sulfide in the dimer (51%). A simple perturbation model is used to derive a quadratic dependence of the superexchange coupling constant J on the covalency of the metal ions with the bridging ligands. This relationship is used to estimate the superexchange contribution in the tetramer (J = -156 cm(-)(1)) as compared to the mixed-valence dimer (J = -360 cm(-)(1)). These results, combined with estimates for the double exchange and the vibronic coupling contributions of the dimer sub-site of the tetramer, lead to a delocalized S(t) = (9)/(2) spin ground state for the mixed-valence dimer in the tetramer. Thus, the decrease in the covalency, hence the superexchange pathway associated with changing the bridging mode of the sulfides from micro(2) to micro(3) on going from the dimer to the tetramer, significantly contributes to the delocalization of the excess electron over the dimer sub-site in the tetramer.     

Spectroscopic studies of substrate interactions with clavaminate synthase 2, a multifunctional alpha-KG-dependent non-heme iron enzyme: correlation with mechanisms and reactivities

Using a single ferrous active site, clavaminate synthase 2 (CS2) activates O(2) and catalyzes the hydroxylation of deoxyguanidinoproclavaminic acid (DGPC), the oxidative ring closure of proclavaminic acid (PC), and the desaturation of dihydroclavaminic acid (and a substrate analogue, deoxyproclavaminic acid (DPC)), each coupled to the oxidative decarboxylation of cosubstrate, alpha-ketoglutarate (alpha-KG). CS2 can also catalyze an uncoupled decarboxylation of alpha-KG both in the absence and in the presence of substrate, which results in enzyme deactivation. Resting CS2/Fe(II) has a six-coordinate Fe(II) site, and alpha-KG binds to the iron in a bidentate mode. The active site becomes five-coordinate only when both substrate and alpha-KG are bound, the latter still in a bidentate mode. Absorption, CD, MCD, and VTVH MCD studies of the interaction of CS2 with DGPC, PC, and DPC provide significant molecular level insight into the structure/function correlations of this multifunctional enzyme. There are varying amounts of six-coordinate ferrous species in the substrate complexes, which correlate to the uncoupled reaction. Five-coordinate ferrous species with similar geometric and electronic structures are present for all three substrate/alpha-KG complexes. Coordinative unsaturation of the Fe(II) in the presence of both cosubstrate and substrate appears to be critical for the coupling of the oxidative decarboxylation of alpha-KG to the different substrate oxidation reactions. In addition to the substrate orientation relative to the open coordination position on the iron site, it is hypothesized that the enzyme can affect the nature of the reactivity by further regulating the binding energy of the water to the ferrous species in the enzyme/succinate/product complex.