Formation of molecular radical cations of aliphatic tripeptides from their complexes with CuII(12-crown-4)

Molecular radical cations have proven to be difficult to generate from aliphatic peptides under electrospray ionization mass spectrometry (ESI-MS) conditions. For a family of small aliphatic peptides GGX, where X = G, A, P, I, L and V, these cations have been generated by electrospraying a mixture of Cu.2+, 12-crown-4 and GGX in methanol/water. GGX.+ is readily formed from the collision-induced dissociation (CID) of [CuII(12-crown-4)(GGX)].2+. The formation of these aliphatic peptide radical ions from these complexes, in cases where it is not possible from the corresponding complexes involving a series of amine ligands instead of 12-crown-4, is likely due to the second ionization energy of the [CuI(12-crown-4)(GGX)]+ complex being higher than that of the corresponding [CuI(amine)(GGX)]+ complex. Using these 12-crown-4 complexes, GGI can be differentiated from the isomeric GGL by comparing the CID spectra of their [a3 + H].+ ions.     

Amperometric phenol biosensor based on sol-gel silicate/Nafion composite film

An amperometric biosensor based on tyrosinase immobilized in silicate/Nafion composite film has been developed for the determination of phenolic compounds. The Nafion polymer in the composite was used not only to overcome the brittleness of the pure sol-gel-derived silicate film but also to increase the long-term stability of the biosensor. Tyrosinase was immobilized by a thin film of silicate/Nafion composite on a glassy carbon electrode. Phenolic compounds were determined by the direct reduction of biocatalytically-liberated quinone species at −200 mV versus Ag/AgCl (3 M NaCl). The process parameters for the fabrication of the enzyme electrode and various experimental variables such as pH and operating potential were explored for optimum analytical performance of the enzyme electrode. The biosensor can reach 95% of steady-state current in about 15 s. The sensitivities of the biosensor for catechol and phenol were 200 and 46 mA/M, respectively. A detection limit of 0.35 mM catechol was obtained with a signal-to-noise ratio of 3. The enzyme electrode retained 74% of its initial activity after 2 weeks of storage in 50 mM phosphate buffer at pH 7.     

Relative silver(I) ion binding energies of α-amino acids: A determination by means of the kinetic method

The relative silver(I) ion binding energies of 19 α-amino acids have been measured by means of the kinetic method. In general, they are similar to the relative copper(I) ion binding energies of corresponding amino acids although there are differences that can be accounted for by differences in silver(I) and copper(I) chemistry. The correlation with proton basicities is comparatively poorer. Again, the differences between silver(I) and proton binding can be attributed to differences in silver(I) and proton chemistry. The relative silver(I) binding energies measured are best described as relative basicities or ΔΔG _Ag ^° ’s. The observed internal consistency during construction of a silver(I) ion basicity ladder implies that ΔΔS _Ag ^° is approximately zero except when histidine and lysine are involved. For 16 α-amino acids, their relative silver(I) ion basicities ≈ relative silver(I) ion affinities or ΔΔG° _Ag ≈ ΔΔH _Ag ^° .     

脉冲电晕放电下的甲烷氧化偶联反应(英文)

研究了在常温,常压及惰性气体稀释的条件下,用脉冲电晕放电进行的甲烷氧化偶联（OCM）反应。在各种实验条件下,产物CZ烃由一6o／o乙烯,－70rk乙烷和一87％乙炔组成。甲烷的转化率及CZ烃的生成速率依赖于反应气中甲烷与氧气的比值,它们的流速及直流电源的电压等n通过调节这些实验条件,甲烷转化为C4烃的转化率可得到优化,在45kV高压,30ml。／min的流速下（反应气体组成为95％CHn与50／0O2）,CZ烃的最高选择性可达85O／O。当反应气体组成为80％CH4和20O／oOZ时,甲烷的最高转化率达23％。在间歇式反应器中,甲烷转化率随反应时间增长而提高,反应75分钟时甲烷转化率达7lO／O,而CZ烃的产物分布,尤其是乙炔的含量随反应时间增长而明显降低,这些实验结果支持了文献中提出的ZCH4～CZH6—CZH4～CZHZ～CO／COZ反应历程。     

Crystal Structure of catena-[(Tetrakis-μ2-acetato-μ2-4,4'-bipyridine) dicopper(Ⅱ)] Acetonitrile Solvate

The title compound,[Cu2(CH3COO)4(C8H10N2)]n·nCH3CN1 (C8H10N2,4,4'-bipy = 4,4'-bipyridine),has been solvothermally synthesized in CH3CN and characterized by X-ray diffraction.The crystal is of monoclinic,space group Cc with a = 22.626(6),b = 14.012(4),c =15.106(4) (A),β = 107.610(3)°,V = 4565(2) (A)3,C20H23Cu2N3O8,Mr = 560.49,Z = 8,Dc = 1.631 g/cm3,μ = 1.914 mm-1,Flack parameter = 0.48(1),F(000) = 2288,R = 0.042 and wR = 0.)98 for 8887 observed reflections (I ＞ 2σ(I)).It consists of nearly linear one-dimensional chains [Cu2(CH3COO)4(C8H10N2)]n derived from paddle-wheel [Cu2(CH3COO)4] unit linked by 4,4'-bipy,and CH3CN as guest molecule regularly decorates between the chains.     

An approach to analysis of single pier based on the variational principle in multi-layered soil

In this study, a variational approach to the settlement analysis of an axially loaded pier embedded in a multi-layered soil profile is presented. In this method, the soil profile and the embedded pier are divided into a number of sub-layers according to the actual number of soil layers observed in the field. The displacement shape function of each soil layer is given as a product of an exponential equation along the pier depth and the Bessel's solution in the radial direction. The displacement relationship among the layers can be derived through the transformation matrices. One of the major features of this method is that the total number of pier elements is the same as that of soil sub-layers. All the field components, such as the displacement, stress, and strain in the soil, can be calculated by closed-form solutions except that the only unknown variable is the value β which can be determined by iteration techniques. Comparisons were made with the results of finite element analysis and the field observation in pile-loaded tests.     

一类Markov链的强逼近

本文给出了一类非时齐的Markov链的强逼近.作为应用,建立了临床试验中Markov链自适应设计的强相合性,重对数律和弱收敛.     

Facile Functionalization of Multilayer Fullerenes (Carbon Nano‐Onions) by Nitrene Chemistry and “Grafting from” Strategy

Facile functionalization of multilayer fullerenes (carbon nano‐onions, CNOs) was carried out by [2+1] cycloaddition of nitrenes. The products were further derivatized by using the “grafting from” strategy of in situ ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Using one‐step nitrene chemistry with high‐energy reagents, such as azidoethanol and azidoethyl 2‐bromo‐2‐methyl propanoate, in N‐methyl‐2‐pyrrolidone at 160°C for 16 h, hydroxyl and bromide functionalities were introduced onto the surfaces of CNOs. These hydroxyl CNOs (CNO‐OH) and bromic CNOs (CNO‐Br) were extensively characterized by various techniques such as thermal gravimetric analysis (TGA), transmission electron microscopy (TEM), Raman spectroscopy and X‐ray photo electron spectroscopy (XPS). TGA measurements indicated that the surface hydroxyl and bromide group density reached 1.49 and 0.49 mmol g^?1, respectively. The as‐functionalized CNOs showed much better solubility in solvents than pristine CNOs. The CNO‐OH were also observed to fluoresce at λ=453 nm in water. The CNO‐OH and CNO‐Br can be conveniently utilized as macroinitiators to conduct surface‐initiated in‐situ polymerizations. Poly(ε‐caprolactone) (PCL, 45wt %) and polystyrene (PS, 60 wt%) were then grafted from surfaces of CNOs through the ROP of ε‐caprolactone with the macroinitiator CNO‐OH and the ATRP of styrene with the macroinitiator CNO‐Br, respectively. The structures and morphology of the resulting products were characterized by ¹H NMR, scanning electron microscopy (SEM), TEM, and atomic force microscopy (AFM). The polymer functionalized CNOs have good solubility/dispersibility in common organic solvents. The facile and scalable functionalization approaches can pave the way for the comprehensive investigation of chemistry of CNOs and fabrication of novel CNO‐based nanomaterials and nanodevices.     

Microstructure,dielectric properties and optical band gap control on the photoluminescence behavior of Ba[Zr<Subscript>0.25</Subscript>Ti<Subscript>0.75</Subscript>]O<Subscript>3</Subscript> thin films

Ba[Zr_0.25Ti_0.75]O₃ (BZT) thin films were synthesized by the complex polymerization method and heat treated at 400 °C for different times and at 700 °C for 2 h. These thin films were analyzed by X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy, field emission gun-scanning electron microscopy (FEG-SEM) and atomic force microscopy (AFM), Ultraviolet–visible (UV–vis) absorption spectroscopy, electrical and photoluminescence (PL) measurements. FEG-SEM and AFM micrographs showed that the microstructure and thickness of BZT thin films can be influenced by the processing times. Dielectric constant and dielectric loss of BZT thin films heat treated at 700 °C were approximately 148 and 0.08 at 1 MHz, respectively. UV–vis absorption spectra suggested the presence of intermediary energy levels (shallow and deep holes) within the band gap of BZT thin films. PL behavior was explained through the optical band gap values associated to the visible light emission components.