Synthesis,characterization, and investigations of antimicrobial activity of benzopyrans,benzofurans and spiro[4.5]decanes

In this study, the radical cyclization reactions of cyclic 1,3-dicarbonyl compounds (1a–c) and α,β-unsaturated alcohols (2a–d) through Mn(OAc)₃ were performed. A series of biologically interesting dihydropyrans (3–5) and dihydrofurans (6–18) were synthesized as a result of these reactions. Spiro compounds (19–20) were obtained from the reactions of 1,3-dicarbonyl compounds and (E)-2,4-diphenyl-but-3-en-2-ol (2e). The unique structure of compound 19 was also confirmed by X-ray crystallography. In addition, the antibacterial activities of synthesized compounds were screened against some bacteria. Their zone diameters showed better results than some known antibiotics.     

Phase Transition of Acrylamide‐Based Polyampholyte Gels in Water

The swelling behavior of acrylamide (AAm)–based polyampholyte hydrogels in water and in aqueous salt (NaCl) solutions was investigated. [(Methacrylamido)propyl]trimethyl‐ammonium chloride (MAPTAC) and acrylic acid (AAc) were used as the ionic comonomer in the hydrogel preparation. Three sets of hydrogels containing 70 mol% AAm and 30 mol% ionic comonomers of varying mole ratios were prepared. The variations of the hydrogel volume in response to changes in pH, and salt concentration were measured. As pH increases from 1, the hydrogel volume V _eq in water first increases and reaches a maximum value at a certain pH. Then, it decreases again with a further increase in pH and attains a minimum value around the isoelectric point (IEP). After passing the collapsed plateau region, the gel reswells again up to pH=7.1. The reswelling of the collapsed gels containing 10 and 4% MAPTAC occurs as a first‐order phase transition at pH=5.85 and 4.35, respectively, while the hydrogel with 1% MAPTAC reswells continuously beyond its IEP. Depending on pH of the solution, the hydrogels immersed in salt solutions exhibit typical polyelectrolyte or antipolyelectrolye behavior. The experimental swelling data were compared with the predictions of the Flory‐Rehner theory of swelling equilibrium including the ideal Donnan equilibria. It was shown that the equilibrium swelling theory qualitatively predicts the experimental behavior of polyampholyte hydrogels.     

Hemoglobin binding from human blood hemolysate with poly(glycidyl methacrylate) beads

Metal-chelating affinity beads have attracted increasing interest in recent years for protein purification. In this study, iminodiacetic acid (IDA) was covalently attached to the poly(glycidyl methacrylate) [PGMA] beads (1.6 μm in diameter). Cu(2+) ions were chelated via IDA groups on PGMA beads for affinity binding of hemoglobin (Hb) from human blood hemolysate. The PGMA beads were characterized by scanning electron microscopy (SEM). The PGMA-Cu(2+) beads (628 μmol/g) were used in the Hb binding-elution studies. The effects of Hb concentration, pH and temperature on the binding efficiency of PGMA-Cu(2+) beads were performed in a batch system. Non-specific binding of Hb to PGMA beads in the absence of Cu(2+) ions was very low (0.39 mg/g). The maximum Hb binding was 130.3 mg/g. The equilibrium Hb binding increased with increasing temperature. The negative change in Gibbs free energy (ΔG°<0) indicated that the binding of Hb on the PGMA-Cu(2+) beads was a thermodynamically favorable process. The ΔS and ΔH values were 102.2 J/mol K and -2.02 kJ/mol, respectively. Significant amount of the bound Hb (up to 95.8%) was eluted in the elution medium containing 1.0 M NaCl in 1 h. The binding followed Langmuir isotherm model with monolayer binding capacity of 80.3-135.7 mg/g. Consecutive binding-elution experiments showed that the PGMA-Cu(2+) beads can be reused almost without any loss in the Hb binding capacity. To test the efficiency of Hb depletion from blood hemolysate, eluted portion was analyzed by fast protein liquid chromatography. The depletion efficiency for Hb was above 97.5%. This study determined that the PGMA-Cu(2+) beads had a superior binding capacity for Hb compared to the other carriers within this study.     

Preconcentration of Cd(II) and Cu(II) ions by coprecipitation without any carrier element in some food and water samples

A simple, rapid, sensitive and environmentally friendly separation and preconcentration procedure, based on the carrier element free coprecipitation (CEFC) of Cu(II) and Cd(II) ions by using an organic coprecipitant, 2-{[4-(4-fluorophenyl)-5-sulphanyl-4H-1,2,4-triazol-3-yl]methyl}-4-{[(4-fluorophenyl) methylene]amino}-5-(4-methylphenyl)-2,4-dihydro-3H-1,2,4-triazol-3-one (MEFMAT) was developed. The analyte ions were determined by flame atomic absorption spectrometric (FAAS) determinations. The optimum conditions for the coprecipitation process were investigated on several commonly tested experimental parameters such as pH of the solution, amount of MEFMAT, sample volume, standing time, centrifugation rate and time. The influences of some anions, cations and transition metals on the recoveries of analyte ions were also investigated, and no considerable interference was observed. The preconcentration factor was found to be 50. The detection limits for Cu(II) and Cd(II) ions based on the three times the standard deviation of the blanks (N:10) were found to be 1.49 and 0.45 μg L^{− 1}, respectively. The relative standard deviations were found to be lower than 3.5% for both analyte ions. The method was validated by analyzing two certified reference materials (CRM-TMDW-500 Drinking Water and CRM-SA-C Sandy Soil C) and spike tests. The procedure was successfully applied to sea water and stream water as liquid samples and tobacco, hazelnut and black tea as solid samples.     

FAAS slurry analysis of lead and copper ions preconcentrated on titanium dioxide nanoparticles coated with a silver shell and modified with cysteamine

We report on the separation and preconcentration of lead(II) and copper(II) ions using silver-coated titanium dioxide nanoparticles modified with cysteamine, and their determination by slurry analysis via flame atomic absorption spectrometry. The ions were adsorbed via a conventional batch technique, and the ion-loaded slurry was separated and directly introduced into the spectrometer, thereby eliminating a number of drawbacks. The effects of pH, amount of sorbent, slurry volume, sample volume and other ions on the recovery were investigated. Under optimized experimental conditions, copper and lead can be recovered within the 95% confidence level in certificated waste water, but also in spiked sea water samples. The technique is fast, simple, and leads to complete elution. The limit of detection (3δ, at n?=?10) was 0.37 μg L^?1 for Cu(II), and 0.38 μg L^?1 for Pb(II).

N-acylbenzotriazole mediated microwave assisted synthesis of protected and novel unprotected ferrocenoylamidoamino acids

In this study, crystalline and chirally stable carboxyl-protected and novel unprotected N-ferrocenoyl amino acid derivatives of Ser, Cys, Ala, Phe, Trp, Asp and Asn have been prepared. These amino acids undergo substitution reaction with 1-(ferrocenylcarbonyl)-1H-benzotriazole, 1, in partially aqueous media under microwave irradiation.     

Electrochemical stability of self-assembled alkylphosphate monolayers on conducting metal oxides

Alkylphosphate self-assembled monolayers (SAMs) were prepared on Nb-doped SrTiO(3) (Nb-STO) conducting metal oxide substrates. Unlike thiols on gold, the alkylphosphate SAMs on Nb-STO exhibited an electrochemical stability over a wide voltage range from -2 to 2 V. Cyclic voltammetry showed that the SAM modification inhibited the electrochemical activity of the underlying conducting substrate with an efficiency dependent on the chain length. Impedance spectroscopy showed that SAM-modified Nb-STO substrates have a significantly higher resistance than bare substrates.     

Micro-Raman Spectroscopy and X-ray Diffraction Analyses of the Core and Shell Compartments of an Iron-Rich Fulgurite

Fulgurites are naturally occurring structures that are formed when lightning discharges reach the ground. In this investigation, the mineralogical compositions of core and shell compartments of a rare, iron-rich fulgurite from the Mongolian Gobi Desert were investigated by X-ray diffraction and micro-Raman spectroscopy. The interpretation of the Raman data was helped by chemometric analysis, using both multivariate curve resolution (MCR) and principal component analysis (PCA), which allowed for the fast identification of the minerals present in each region of the fulgurite. In the core of the fulgurite, quartz, microcline, albite, hematite, and barite were first identified based on the Raman spectroscopy and chemometrics analyses. In contrast, in the shell compartment of the fulgurite, the detected minerals were quartz, a mixture of the K-feldspars orthoclase and microcline, albite, hematite, and goethite. The Raman spectroscopy results were confirmed by X-ray diffraction analysis of powdered samples of the two fulgurite regions, and are consistent with infrared spectroscopy data, being also in agreement with the petrographic analysis of the fulgurite, including scanning electron microscopy with backscattering electrons (SEM-BSE) and scanning electron microscopy with energy dispersive X-ray (SEM-EDX) data. The observed differences in the mineralogical composition of the core and shell regions of the studied fulgurite can be explained by taking into account the effects of both the diffusion of the melted material to the periphery of the fulgurite following the lightning and the faster cooling at the external shell region, together with the differential properties of the various minerals. The heavier materials diffused slower, leading to the concentration in the core of the fulgurite of the iron and barium containing minerals, hematite, and barite. They first underwent subsequent partial transformation into goethite due to meteoric water within the shell of the fulgurite. The faster cooling of the shell region kinetically trapped orthoclase, while the slower cooling in the core area allowed for the extensive formation of microcline, a lower temperature polymorph of orthoclase, thus justifying the prevalence of microcline in the core and a mixture of the two polymorphs in the shell. The total amount of the K-feldspars decreases only slightly in the shell, while quartz and albite appeared in somewhat larger amounts in this compartment of the fulgurite. On the other hand, at the surface of the fulgurite, barite could not be stabilized due to sulfate lost (in the form of SO₂ plus O₂ gaseous products). The conjugation of the performed Raman spectroscopy experiments with the chemometrics analysis (PCA and, in particular, MCR analyses) was shown to allow for the fast identification of the minerals present in the two compartments (shell and core) of the sample. This way, the XRD experiments could be done while knowing in advance the minerals that were present in the samples, strongly facilitating the data analysis, which for compositionally complex samples, such as that studied in the present investigation, would have been very much challenging, if possible.     

Achieving the High Capacity and High Stability of Li-Rich Oxide Cathode in Garnet-Based Solid-State Battery

Solid-state batteries (SSBs) based on Li-rich Mn-based oxide (LRMO) cathodes attract much attention because of their high energy density as well as high safety. But their development was seriously hindered by the interfacial instability and inferior electrochemical performance. Herein, we design a three-dimensional foam-structured GaN−Li composite anode and successfully construct a high-performance SSB based on Co-free Li_1.2Ni_0.2Mn_0.6O₂ cathode and Li_6.5La₃Zr_1.5Ta_0.5O₁₂ (LLZTO) solid electrolyte. The interfacial resistance is considerably reduced to only 1.53 Ω cm² and the assembled Li symmetric cell is stably cycled more than 10,000 h at 0.1–0.2 mA cm⁻². The full battery shows a high initial capacity of 245 mAh g⁻¹ at 0.1 C and does not show any capacity degradation after 200 cycles at 0.2 C (≈100 %). The voltage decay is well suppressed and it is significantly decreased from 2.96 mV/cycle to only 0.66 mV/cycle. The SSB also shows a very high rate capability (≈170 mAh g⁻¹ at 1 C) comparable to a liquid electrolyte-based battery. Moreover, the oxygen anion redox (OAR) reversibility of LRMO in SSB is much higher than that in liquid electrolyte-based cells. This study offers a distinct strategy for constructing high-performance LRMO-based SSBs and sheds light on the development and application of high-energy density SSBs.     

Structure of the Nematic Phase of Pbaba

X-ray diffraction investigations of the nematic phase (191°C - 276°C) of p-n-propyloxybenzylidene-p-amino benzoic acid have shown that this phase is a skewed cybotactic nematic phase. The diffraction patterns, obtained with aligned samples, reveal an additional surprising structural feature, - the presence of one dimensional molecular correlation in a direction parallel to the nematic director. At 192°C, it is found that the molecular unit, thus correlated, is about 37 Å in length (dimer length) and the correlation range extends up to about seven such units. This l-d correlation persists up to the N-I transition.