Four new isoflavonoids from the stem bark of Erythrina variegata

Bioassay-directed fractionation of the stem bark extract of Erythrina variegata L. has resulted in the isolation of three new isoflavones: 5,4'-dihydroxy-8-(3,3-dimethylallyl)-2'-methoxyisopropylfurano[4,5:6,7]isoflavone (1), 5,7,4'-trihydroxy-6-(3,3-dimethylallyloxiranylmethyl)isoflavone (2), 5,4'-dihydroxy-8-(3,3-dimethylallyl)-2'-hydroxymethyl-2'-methylpyrano[5,6:6,7]isoflavone (3) and a new isoflavanone, 5,4'-dihydroxy-2'-methoxy-8-(3,3-dimethylallyl)-2',2'-dimethylpyrano[5,6:6,7]isoflavanone (4) together with seven known compounds, euchrenone b10 (5), isoerysenegalensein E (6), wighteone (7), laburnetin (8), lupiwighteone (9), erythrodiol (10), and oleanolic acid (11). The structures were determined on the basis of spectroscopic analyses and chemical evidence. The effect of these compounds on the proliferation of rat osteogenic sarcoma (UMR106) is also reported.     

Electrowetting of aligned carbon nanotube films

Electrowetting is one approach to reducing the interfacial tension between a solid and a liquid. In this method, an electrical potential is applied across the solid/liquid interface which modifies the wetting properties of the liquid on the solid without changing the composition of the solid and liquid phases. Electrowetting of aligned carbon nanotube (CNT) films is investigated by the sessile drop method by dispensing deionized (DI) water or 0.03 M NaCl droplets (contacted by Au wire) onto aligned CNT films assembled on a copper substrate. The results demonstrate that electrowetting can greatly reduce the hydrophobicity of the aligned CNTs; the contact angle saturation for DI water and 0.03 M NaCl droplets occurs at 98 and 50 degrees , respectively. The combined effects of the geometrical roughness and the electrical potential on the contact angle are briefly discussed and modeled. Such a strategy may be invoked to controllably reduce the interfacial tension between carbon nanotubes (CNTs) and polymer precursors when infiltrating the monomers into the prealigned nanotube films.     

Impact of prefractionation using Gradiflow on two-dimensional gel electrophoresis and protein identification by matrix assisted laser desorption/ionization-time of flight-mass spectrometry

Prefractionation of protein samples prior to two-dimensional electrophoresis (2-DE) has the potential to increase the dynamic detection range for proteomic analysis. We evaluated a membrane-based electrophoretic separation technique (Gradiflow) for its ability to fractionate an exoproteome sample from the filamentous fungus Trichoderma reesei. The sample was separated on the basis of size and charge. Buffer optimization was found to be necessary for successful size fractionation. Fractionation by charge was used to resolve the sample into four fractions that were subjected to analysis by two-dimensional electrophoresis (2-DE). Enhanced detection of low-abundance proteins with selective removal of high-abundance species was achieved. Fractionated and unfractionated samples were examined for differences in the ability to identify proteins following 2-DE using trypsin in-gel digestion followed by peptide mass fingerprinting using matrix assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF-MS). Fractionated samples showed marked improvement in protein identification ability and sequence coverage. This study demonstrates the utility of the Gradiflow for fractionation, resulting in an enhancement of resolution and characterization of a moderately complex proteome.     

Acetylcholinesterase complexed with bivalent ligands related to huperzine a: experimental evidence for species-dependent protein-ligand complementarity

Acetylcholinesterase (AChE) inhibitors improve the cognitive abilities of Alzheimer patients. (-)-Huperzine A [(-)-HupA], an alkaloid isolated from the club moss, Huperzia serrata, is one such inhibitor, but the search for more potent and selective drugs continues. Recently, alkylene-linked dimers of 5-amino-5,6,7,8-tetrahydroquinolinone (hupyridone, 1a), a fragment of HupA, were shown to serve as more potent inhibitors of AChE than (-)-HupA and monomeric 1a. We soaked two such dimers, (S,S)-(-)-bis(10)-hupyridone [(S,S)-(-)-2a] and (S,S)-(-)-bis(12)-hupyridone [(S,S)-(-)-2b] containing, respectively, 10 and 12 methylenes in the spacer, into trigonal TcAChE crystals, and solved the X-ray structures of the resulting complexes using the difference Fourier technique, both to 2.15 A resolution. The structures revealed one HupA-like 1a unit bound to the "anionic" subsite of the active-site, near the bottom of the active-site gorge, adjacent to Trp84, as seen for the TcAChE/(-)-HupA complex, and the second 1a unit near Trp279 in the "peripheral" anionic site at the top of the gorge, both bivalent molecules thus spanning the active-site gorge. The results confirm that the increased affinity of the dimeric HupA analogues for AChE is conferred by binding to the two "anionic" sites of the enzyme. Inhibition data show that (-)-2a binds to TcAChE approximately 6-7- and > 170-fold more tightly than (-)-2b and (-)-HupA, respectively. In contrast, previous data for rat AChE show that (-)-2b binds approximately 3- and approximately 2-fold more tightly than (-)-2a and (-)-HupA, respectively. Structural comparison of TcAChE with rat AChE, as represented by the closely related mouse AChE structure (1maa.pdb), reveals a narrower gorge for rat AChE, a perpendicular alignment of the Tyr337 ring to the gorge axis, and its conformational rigidity, as a result of hydrogen bonding between its hydroxyl group and that of Tyr341, relative to TcAChE Phe330. These structural differences in the active-site gorge explain the switch in inhibitory potency of (-)-2a and 2b and the larger dimer/(-)-HupA potency ratios observed for TcAChE relative to rat AChE. The results offer new insights into factors affecting protein-ligand complementarity within the gorge and should assist the further development of improved AChE inhibitors.     

Manganese/Bicarbonate-catalyzed epoxidation of lipophilic alkenes with hydrogen peroxide in ionic liquids

[reaction: see text] Effective epoxidation of lipophilic alkenes using hydrogen peroxide was accomplished with the manganese sulfate/bicarbonate catalytic system in an ionic liquid at room temperature.     

Performance evaluation of polycyclic aromatic hydrocarbons analysis in sediment from proficiency testing with metrological reference values

This paper describes a metrological approach to evaluate the measurement capability of laboratories participating in two proficiency testing (PT) programmes involving the analysis of five polycyclic aromatic hydrocarbons (PAHs) in sediment samples. Reference values of PAHs in the programmes for performance assessment were obtained from an accurate isotope dilution gas chromatography mass spectrometry (ID-GCMS) method which was thoroughly validated and verified. Isotope dilution mass spectrometry (IDMS) technique usually has a well-defined measurement uncertainty budget and a traceability link to an International System of Units. Provision of the metrological reference values in PT enables the establishment of a technical platform to assess the actual competence of the participating laboratories in sediment PAHs analysis. Results of the PT programmes showed that about 80 % of the laboratories employed gas chromatography in their analyses and the remaining used liquid chromatography. Irrespective of the techniques being used, however, the majority of the participating laboratories were observed to underestimate values in which the mean values of the five reported PAHs were less than those of the ID-GCMS-derived reference values by 13–20 %. Only 41–44 % of the participating laboratories were able to achieve satisfactory z-scores. The present study revealed that the reinforcement of the capability for accurate measurement of PAHs in sediment samples in laboratories worldwide should be addressed.     

Half-sandwich titanium(IV) complexes with Kläui's tripod ligand

Treatment of [Ti(O-i-Pr)(2)Cl(2)] with NaL(OEt) (L(OEt)(-) = [CpCo[P(O)(OEt)(2)](3)](-), Cp = eta(5)-C(5)H(5)) afforded [L(OEt)Ti(O-i-Pr)(2)Cl] that reacted with HCl in ether to give [L(OEt)TiCl(3)] (1). The average Ti-O and Ti-Cl distances in 1 are 1.975 and 2.293 A, respectively. Reaction of titanyl sulfate with NaL(OEt) in water followed by addition of HBF(4) afforded [L(OEt)TiF(3)] (2), the Ti-O and Ti-F distances of which are 2.020(2) and 1.792(2) A, respectively. The Zr(IV) analogue [L(OEt)ZrF(3)] (3) was prepared similarly from zirconyl nitrate, NaL(Oet), and HBF(4) in water. The Zr-O and average Zr-F distances in 3 are 2.139(2) and 1.938(2) A, respectively. Treatment of 1 with tetrachlorocatechol (H(2)Cl(4)cat) afforded [L(OEt)Ti(Cl(4)cat)Cl] (4). The average Ti-O(P), Ti-O(C), and Ti-Cl distances in 4 are 1.972, 1.926, and 2.334 A, respectively. Hydrolysis of 4 in the presence of Et(3)N yielded the mu-oxo dimer [(L(OEt))(2)Ti(2)(Cl(4)cat)(2)(mu-O)] (5). The average Ti-O(P), Ti-O(C), and Ti-O(Ti) distances in 5 are 2.027, 1.926, and 1.7977(9) A. Treatment of 1 with 1,1'-binaphthol (BINOLH(2)) in the presence of Et(3)N afforded [(L(OEt))(2)Ti(2)(mu-O)(2)(mu-BINOL)] x 2BINOLH(2) (6.2BINOLH(2)). Complex 1 is capable of catalyzing ring opening of epoxides with Me(3)SiN(3) under solvent-free conditions presumably via a Ti-azide intermediate.