Aged titania nanoparticles: the simultaneous control of local and long-range properties

TiO(2) nanoparticles are obtained by combining a sol-gel preparative route with hydrothermal aging steps, performed in mild conditions, of varying time lengths. Both aged and un-aged samples are thermally treated at 300 and 600 degrees C, for the same length of time. The crystal structures, the phase composition, and crystallite sizes are analyzed by powder X-ray diffraction. Raman spectra of anatase nanocrystals with average sizes of 7-10 nm are reported and the correlation between the Raman band shape of the main feature at 144 cm(-1) and the crystallite size is discussed. Nitrogen physisorption by Brunauer-Emmett-Teller (BET) method is adopted to evaluate the particles surface area and mesopore size and size distribution. The role played by the hydrothermal step in affecting the physicochemical properties of the powders is discussed also with respect to the H(2)O/TiO(2) interactions as apparent from Raman spectroscopy investigations of the O-H stretching range (3000-3800 cm(-1)).     

Influence of the preparation procedure on the properties of polyaniline based magnetic composites

A versatile process for the preparation of composite films consisting of magnetite (Fe₃O₄) nanoparticles embedded in a polyaniline (PANI) matrix is reported. Spectroscopic properties of polyaniline matrix (PANI-EB), polyaniline protonated with camphor sulfonic acid (PANI-CSA_0.5) PANI-ES and PANI/Fe₃O₄-CSA_0.5 composites were studied, both in the state of the solutions of m-cresol and in thin films processed from the same solvents. The results of these studies indicate that m-cresol can be used for PANI/Fe₃O₄ composite preparation. Such films show both reasonably high electrical conductivity and magnetic permeability. A controlled application of a magnetic field during the casting process resulted in the formation of the materials with an unusual combination of magnetic and transport properties. The obtained films show the behavior that can be explained by the presence of both ferromagnetic and paramagnetic phases. The superparamagnetic contribution, if any, is very small. Application of the external magnetic field during fabrication of the composites stimulates creation of the aggregates of magnetic particles which, although keeps conductivity at a relatively high level, leads to a small decrease of the conductivity value.     

Stereochemical analysis of 3,4-methylenedioxymethamphetamine and its main metabolites by gas chromatography/mass spectrometry

3,4-Methylenedioxymethamphetamine (MDMA, ecstasy) is consumed as the racemate but some metabolic steps are enantioselective. In addition, chiral properties are preserved during MDMA biotransformation. A quantitative analytical methodology using gas chromatography/mass spectrometry (GC/MS) to determine enantioselective disposition in the body of MDMA and its main metabolites including 3,4-methylenedioxyamphetamine (MDA), 4-hydroxy-3-methoxymethamphetamine (HMMA), and 4-hydroxy-3-methoxyamphetamine (HMA) was developed. Plasma and urine samples were collected from a male volunteer. The analysis of MDMA, MDA, and 4-hydroxy-3-methoxy metabolites by GC/MS required a two-step derivatization procedure. The first step consisted of derivatization of the amine with enantiomerically pure Mosher's reagent ((R)-MTPCl). Triethylamine was used as a base to neutralize hydrochloric acid formed during the reaction allowing quantitative derivatization, which resulted in a substantial improvement in the sensitivity of the method compared with other previously described techniques. Further treatment with ammonium hydroxide was required since both amine and hydroxyl groups underwent derivatization in the reaction. Ammonium hydroxide breaks bonds formed with hydroxyl groups without affecting amine derivatives. The second derivatization step using hexamethyldisilazane was needed for metabolites containing phenol residues. This derivatization method permitted the stereochemically specific study of MDMA and its main monohydroxylated metabolites by GC/MS. A detailed study of the chemical reactions involved in the derivatization steps was indispensable to develop a straightforward, sensitive, and reproducible method for the analysis of the parent drug compound and its metabolites.     

Photocatalytic TiO2 Coatings: Effect of Substrate and Template

Transparent TiO₂ films with a high photodegradation activity towards an azo dye in aqueous solution were prepared by sol–gel processing. Films on soda–lime glass supports protected with a thin silica barrier layer exhibited better crystallization and monodisperse nanoparticles, higher absorption of light below 370 nm, and higher photocatalytic activity than those films deposited on bare glass supports proving the detrimental effect of interdiffused sodium ions on the development of the anatase nanostructure. The effect of substrate was more pronounced in thinner films (300 nm) than in thicker ones (1200 nm), which were achieved by adding a template (i.e. Pluronic F127) to the sol.     

Profiling fatty acids in vegetable oils by reactive pyrolysis-gas chromatography with dimethyl carbonate and titanium silicate

A novel methodology in on-line pyrolysis-gas chromatography (Py-GC) for the fast analysis of fatty acids in vegetable oils with minimal sample treatment and the use of non-toxic reagents is described. Pyrolysis at 500 degrees C for 10 s of sub-microgram quantity of vegetable oil dissolved in dimethyl carbonate (DMC) and in the presence of nanopowder titanium silicon oxide resulted in the production of fatty acid methyl esters (FAMEs) as unique products. Pyrolysis performed by means of a resistively heated filament pyrolyser interfaced to a GC-MS apparatus enabled the direct analysis of evolved FAMEs. The DMC/Py-GC-MS analysis was tested on soybean, coconut, linseed, walnut and olive oil and the results compared to the classical BF(3)-methanol as reference methodology. The DMC method exhibited a lower precision and was biased towards lower levels of polyunsaturated fatty acids (PUFA) in comparison to the BF(3)-methanol method, but was more advantageous in terms of reduced sample treatment, waste generation and risk factors of employed chemicals.     

1,3-Cycloaddition von alkinen an hetero-1,3-diene 1-aminopyrrole aus 1,2-diazabuta-1,3-dienen und 1-diethylaminopropin

1-Aminopyrroles (4) are obtained by reaction of 1,2-diazabuta-1,3-dienes (1) and ynamines (2). This reaction represents one of the very rare examples of 1,3-cycloaddition processes of alkynes and hetero-1,3-dienes.     

Mass displacements in quadrupolar field analysers

The influence of different instrumental parameters on the mass displacements observed in an ion trap and a quadrupole mass filter was investigated. In ion trap measurements it was observed that isolated ions (obtained by both ‘apex’ and ‘two-step’ isolation methods) show the same mass displacements determined in the usual mass spectra; isobaric ions of different structure irradiated with supplementary a.c. fields are ejected at different a.c. voltages, and different cooling times do not affect the mass value. In the quadrupole mass filter, differences in mass were found among isobaric ions of different structure, although to a smaller extent than those observed in the ion trap. All the data obtained are in agreement with the hypothesis of ion–r.f. field interactions originating from the polarizability of the ion.     

Synthesis and solid-state organization of coil-ring-coil block copolymers

Shape-persistent macrocycles based on the phenyl-ethynyl-butadienyl backbone containing two extraannular hydroxyl groups were prepared by the oxidative coupling of the appropriate phenylethynyl oligomers. Carbodiimide-directed coupling with independently synthesized polystyrene carboxylic acid oligomers led to ABA coil-ring-coil block copolymers in which the central macrocycle serves as rigid and the polystyrene oligomers as flexible elements. Depending on the size of the coil blocks, these structures aggregate in cyclohexane into supramolecular hollow cylindrical brushes in which the rigid core is surrounded by the flexible matrix. However, in the solid state it is not possible to identify a morphology in which isolated channels based on aggregated macrocycles are embedded in a matrix of polystyrene. Detailed X-ray and electron diffraction studies on samples prepared from a solution in cyclohexane under equilibrium conditions show that the material adopts a lamellar morphology in the solid state in which columns of macrocycles are aggregated into layers which are separated by polystyrene.     

Counterion Exchange Selectivity in Detergent–Polymer Aggregates

In aqueous solution, the interaction between sodium dodecyl sulfate (SDS) and poly(ethylene glycol) (PEG) results in the formation of small aggregates or clusters of SDS attached to the PEG polymer chain. Selectivity coefficients for exchange of two monovalent (N-methyl-4-cyanopyridinium cation and Tl⁺) and two divalent (methylviologen cation and Cu²⁺) counterions at the surface of SDS–PEG clusters, determined employing photophysical techniques, are similar, but not identical, to those for exchange at the surface of SDS micelles in the absence of PEG. The principal factor affecting ion exchange selectivity in SDS–PEG clusters does not appear to be aggregate size or surface charge density but rather the presence of poly(oxyethylene) subunits at the aggregate surface.     

Exploiting clock transitions for the chemical design of resilient molecular spin qubits

Molecular spin qubits are chemical nanoobjects with promising applications that are so far hampered by the rapid loss of quantum information, a process known as decoherence. A strategy to improve this situation involves employing so-called Clock Transitions (CTs), which arise at anticrossings between spin energy levels. At CTs, the spin states are protected from magnetic noise and present an enhanced quantum coherence. Unfortunately, these optimal points are intrinsically hard to control since their transition energy cannot be tuned by an external magnetic field; moreover, their resilience towards geometric distortions has not yet been analyzed. Here we employ a python-based computational tool for the systematic theoretical analysis and chemical optimization of CTs. We compare three relevant case studies with increasingly complex ground states. First, we start with vanadium(iv)-based spin qubits, where the avoided crossings are controlled by hyperfine interaction and find that these S = 1/2 systems are very promising, in particular in the case of vanadyl complexes in an L-band pulsed EPR setup. Second, we proceed with a study of the effect of symmetry distortions in a holmium polyoxotungstate of formula [Ho(W₅O₁₈)₂]⁹⁻ where CTs had already been experimentally demonstrated. Here we determine the relative importance of the different structural distortions that causes the anticrossings. Third, we study the most complicated case, a polyoxopalladate cube [HoPd₁₂(AsPh)₈O₃₂]⁵⁻ which presents an unusually rich ground spin multiplet. This system allows us to find uniquely favorable CTs that could nevertheless be accessible with standard pulsed EPR equipment (X-band or Q-band) after a suitable chemical distortion to break the perfect cubic symmetry. Since anticrossings and CTs constitute a rich source of physical phenomena in very different kinds of quantum systems, the generalization of this study is expected to have impact not only in molecular spin science but also in other related fields such as molecular photophysics and photochemistry.

We employ a python computational tool to compare 3 relevant case studies with increasingly complex ground states: vanadyl complexes, Ho(iii) square antiprisms and Ho(iii) cubic structures.