液-液萃取电感耦合等离子体质谱法测定天然水中痕量稀土元素

建立了以单、二（2－乙基己基）磷酸酯混合螯合剂的庚烷溶液作为萃取剂，6.0mol/L HCl反萃取预分离富集，In和Rh做内,ICP-MS测定天然水中15种稀土元素的分析方法。方法的富集倍数为200倍，各元素的检出限范围在0.01-1.8ng/L之间，相对标准偏差RSD＜5％，萃取回收率＞93％。     

铋（Ⅲ）—溴邻苯三酚红配合物吸附波及其应用

铋（Ⅲ）－溴邻苯三酚红配合物吸附波及其应用＊刘家欣段友构黄诚朱苗力（吉首大学化学系湖南吉首４１６０００）匡向阳（永州市水文站湖南永州４２５０００）关键词铋溴邻苯三酚红配合物吸附波中图分类号Ｏ６５７．１４近年来，在某些有机试剂存在下用极谱法测定铋已有一...     

Zs－93硒剂对移植性小鼠S＿（180）肉瘤的抑制作用及其免疫活性

用硒与尿素化合，新生的由杂环有机硒所组成的Ｚｓ－９３硒剂治疗移植性Ｓ１８０肉瘤，有显著的抑瘤作用（Ｐ＜０．０１），其作用表现出一定的剂量效应，以５μｇ／只小鼠为最适，抑瘤率达６０．７６％，治疗组小鼠的Ｔ细胞、ＳＯＤ活性均有增强。     

硒与消化系统癌关系的探讨

据不同地貌、地质条件在30个县市按剖面、同步、随机取土壤样品372份．测定硒等微量元素含量．作等级相关分析显示。土壤硒含量与消化系统癌呈负相关关系．作相对危险度、剂量-效应及多因素分析,认为此负相关关系并非偶然现象．     

镓改性ZSM-5沸石中镓活性中心的形成与表征

采用脉冲微反体系研究了经不同程度还原和不同镓含量的GaZSM-5沸石的芳构化性能与吡啶吸附红外光谱特征谱带吸收度的关联，证实了1458 cm~(-1)吸收带的用于表征与Ga物种有关的活性中心，并研究了沸石的硅铝比对Ga中心形成和Ga的价态对芳构化性能的影响。结果表明，对Ga含量相同的样品来说，硅铝比愈低，起始Ga中心生成量愈多，高价态与低价态的Ga中心对丙烷芳构化反应都有促进作用。     

叔醇脱水成烯反应的溶剂化能力与介电常数的关系

我们用Fe_2(SO_4)_3·xH_2O为催化剂,对2-甲基-2-已醇脱水生成烯烃反应的溶剂化能力及其动力学做了研究,测定了20种不同溶剂中的反应速率常数和以丙至辛6种直链醇为溶剂于不同温度下反应的速率常数,确定了溶剂化能力与溶剂介电常数之间的线性关系。这方面工作尚未见报道。     

Excess molar enthalpies of binary mixtures for (tributyl phosphate+methanol/ethanol) at 298.15 K

Excess molar enthalpies of binary mixtures for tributyl phosphate (TBP)+methanol/ethanol were measured with a TAM air Isothermal calorimeter at 298.15 K and ambient. The results for xTBP+(1–x)CH₃OH are negative in the whole range of composition, while the values for xTBP+(1–x)C₂H₅OH change from positive values at low x to small negative values at high x. The experimental results have been correlated with the Redlich–Kister polynomial. IR spectra of the mixtures were measured to investigate the effect of hydrogen bonding in the mixture.     

Polyparametric modification equation for estimating thermodynamic properties of energetic nitro compounds

Calculation methods, based on hybrid density-functional theory with the basis sets of B3LYP/ 6-311+G (2d, p)//B3LYP/6-31G(d, p)and B3LYP/6-31+G(d)//B3LYP/6-31G(d, p), were applied to determine the thermodynamic characteristics of various energetic nitro compounds. A parametric modification equation and the least-squares approach were used to identify 21 of the energetic research compounds. The atomization energies of these 21 compounds have an average relative error of 0.21–0.25% of the experimental values. The enthalpy (H _f) and the Gibbs energy (G _f) of formation have mean absolute errors of 10.8–11.4 kJ/ mol (2.6–2.7 kcal/mol) and 10.0–10.3 kJ/mol (2.4 kcal/ mol), respectively. The enthalpy and the Gibbs energy of formation obtained exceed those in the literature obtained by semiempirical calculations. The calibrated least-squares parameters and parametric equations were used to predict H _f and G _f for the five newly developed energetic nitro compounds for further applications.Acknowledgements. The authors would like to thank the National Science Council of the Republic of China for financial support of this work under grant no. NSC-91-2113-M-014-003. The National Center for High-Performance Computing providing the computation facility is also acknowledged.     

高镍钢中镍的测定

以王水溶解试样，用氨水作沉淀剂，并加入适量三乙醇胺及柠檬酸进行掩蔽，以消除铁及铬等元素的干扰，在pH=3-6的酸性介质中，加入过量的EDTA标准溶液，使镍与EDA形成稳定的络合物，以PAN为指示剂，用硫酸铜标准溶液滴定过量的EDTA标准溶液，从而求得镍的含量。     

Study on laminar viscosity and zero shear viscosity of latex systems

The flowing nature and rheological properties of polymethyl methacrylate latex systems in a coaxial cylinder viscometer were studied on the basis of laminar shear flow model and rheological experimental data. The physical meaning of laminar viscosity (eta(i,j)) and zero shear viscosity (eta(0)) were described. We assumed that laminar shear flows depended on position and shear time, so microrheological parameters were the function of position and shear time. eta(i,j) was the viscosity of any shear sheet i between two neighboring laminar shear flows at time t; j was denoted as j=t/Deltat; and Deltat was the interacting time of two particles or two laminar shear flows. tau(i,j) and gamma(i,j) were shear stress and shear rate of any shear sheet i at j moment. According to Newton regulation tau(i,j)=eta(i,j)gamma(i,j), apparent viscosity eta(a) should be a statistically mean value of j shear sheets laminar viscosity at j moment, i.e., eta(a)= summation operator(i=j)eta(i,j)gamma(i,j)/ summation operator(i=j)gamma(i,j). eta(0) was defined as shear viscosity between a laminar shear flow and a still fluid surface, i.e., eta(0)=(tau(i,j)/gamma(i,j))(j-i-->0). These new ideas described above may be helpful in the study of the micromechanisms of latex particle systems and worthy of more research.