Interference-induced enhancement of field entanglement in a microwave-driven V-type single-atom laser

We demonstrate the generation of two-mode continuous-variable (CV) entanglement in a V-type three-level atom trapped in a doubly resonant cavity using a microwave field driving a hyperfine transition between two upper excited states. By numerically simulating the dynamics of this system, our results show that the CV entanglement with large mean number of photons can be generated even in presence of the atomic relaxation and cavity losses. More interestingly, it is found that the intensity and period of entanglement can be enhanced significantly with the increasing of the atomic relaxation due to the existence of the perfect spontaneously generated interference between two atomic decay channels. Moreover, we also show that the entanglement can be controlled efficiently by tuning the intensity of spontaneously generated interference and the detuning of the cavity field.     

A Comparative Study of Electron Heat Transport in a Stochastic and a Non‐Stochastic Magnetic Field

We studied the electron heat transport across a non‐local stochastic magnetic field and a non‐local non‐stochastic magnetic field in tokamak plasmas. Analytical results and numerical simulation results were compared with conditions of a stochastic and a non‐stochastic magnetic field respectively in this article. Parameter of stochasticity in perturbed magnetic field was found not tobe a key factor in influencing effective radial heat conductivity in radial direction of tokomak when Chirikov parameter is close to one (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Relationship of Reaction Temperature,Tg and Rich‐Syndiotacticity of Poly(alkyl methacrylate)s in Modified Microemulsion Polymerization

Nanoscale poly(alkyl methacrylate)s including poly(methyl methacrylate), poly(ethyl methacrylate), poly(cyclohexyl methacrylate), poly(iso‐butyl methacrylate) and poly(benzyl methacrylate) were prepared by a modified microemulsion polymerization procedure. NMR analysis suggested that these poly(methacrylate)s samples were higher in syndiotactic content, lower in isotactic content and the glass transition temperatures (T_gs) of them were also higher than those reported in the literature. The tacticities of the poly(methacrylate)s, beside the restricted volume effect of nanoparticles during the modified microemulsion polymerization, were mainly influenced by the reaction temperature, the lower the reaction temperature, the higher the syndiotacticity of the products. The syndiotacticity of the product decreased obviously when the polymerization was carried out at a temperature far above the T_g of the resulting polymer. It was also shown that the tacticity of the polymer was affected by the monomer structure, a monomer with the bulkier alkyl side group would liable to result in a polymer with richer syndiotacticity. Possible mechanism of rich‐syndiotacticity was also discussed.     

Highly sensitive lable-free electrochemical aptasensor for thrombin detection with cobalt hexacyanoferrate as the electrochemical probe

A highly sensitive label-free electrochemical aptasensor has been constructed for the electrochemical detection of thrombin (TB), where two layers of cobalt hexacyanoferrate (CoHCF) redox probes sandwiched with carbon nanotubes–Nafion were directly immobilized on the electrode surface by electrodeposition. Through the strong interaction between CN^? (CoHCF) and gold nanoparticles (GNPs), GNPs were assembled on the CoHCF-modified electrode for the immobilization of thiolated thrombin aptamers (TBA). In the presence of target TB, TBA on the electrode surface could catch TB to form TBA–TB complex, which made a barrier for the electron transfer, resulting in a greater decrease in CoHCF redox probe signals. Thus, the proposed aptasensor showed a high sensitivity and a much wider linearity to TB in the range of 1.0 pg/mL?～?1.0 μg/mL with a detection limit of 0.28 pg/mL.     

Isolation of highly pure erlotinib hydrochloride by recrystallization after nucleophilic substitution of an impurity with piperazine

Optimized synthesis and purification of erlotinib hydrochloride (N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)quinazoline-4-amine hydrochloride) were studied. Highly polar piperazine was used in a nucleophilic substitution reaction with the chlorinated intermediate byproduct N-(3-ethynylphenyl)-6(2-chloroethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride. As a result, N-(3-ethynylphenyl)-6(2-chloroethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride was completely transformed to N-(3-ethynylphenyl)-6(2-piperzinoethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride. The polarity of N-(3-ethynylphenyl)-6(2-piperzinoethoxy)-7-(2-methoxyethoxy)quinazolin-4-amine hydrochloride was changed, and its molecule was enlarged. It was easy to remove this larger, more polar, compound by recrystallization. Highly pure erlotinib hydrochloride was obtained with low impurity content (<1 %). The purity of erlotinib hydrochloride was >99.9 %.     

Effects of High Pressure on the Surface Plasmon Resonance of Copper and Silver Nanocrystals

We used a diamond anvil cell(DAC) to control the deformation of synthesized copper nanorods and silver nanoparticles. And we measured the surface plasmon resonance of copper nanorods and silver nanoparticles, which exhibit redshifts or blueshifts. The surface plasmon resonance shows an abnormal blue shift for both copper nanorods and silver nanoparticles. The solvents of copper nanorods and silver nanoparticles are n-hexane and water, where the pressure loads include quasi-hydrostatic and non-hydrostatic.     

An 18 Multi-InDels panel for analysis of highly degraded forensic biological samples

DNA genotyping from trace and highly degraded biological samples is one of the most significant challenges of forensic DNA identification. There is a lack of simple and effective methods for genotyping highly degraded samples. In this study, a multiple loci insertion/deletion polymorphisms (Multi-InDels) panel was designed for detecting 18 autosomal Multi-InDels through capillary electrophoresis (CE) with amplicon sizes no longer than 125 bp. Studies of sensitivity, degradation, and species specificity were performed and a population study was carried out using 192 samples from Han populations in Hunan province in the south of China. The combined random match probability (CMP) of these 18 Multi-InDels was 3.23 × 10^–12 and the cumulative probability of exclusion (CPE) was 0.9989, suggesting this panel could be used independently for human identification and could provide efficient supporting information for parentage testing. Complete profiles were obtained from as low as 62.5 pg of total input DNA after increasing the number of PCR cycles. Moreover, all alleles were detected from artificially highly degraded DNA after 80 min of boiling water bath treatment. This 18 Multi-InDels panel is simple, fast, and effective for the forensic analysis of highly degraded DNA.     

Comparison of microbiological loads and physicochemical properties of raw milk treated with single-/multiple-cycle high hydrostatic pressure and ultraviolet-C light

The effects of ultraviolet-C radiation (UV-C, 11.8?W/m²), single-cycle and multiple-cycle high hydrostatic pressure (HHP at 200, 400 or 600?MPa) on microbial load and physicochemical quality of raw milk were evaluated. Reductions of aerobic plate count (APC) and coliform count (CC) by HHP were more than 99.9% and 98.7%, respectively. Inactivation efficiency of microorganisms increased with pressure level. At the same pressure level, two-cycle treatments caused lower APC, but did not show CC differences compared with single-cycle treatments. Reductions of APC and CC by UV-C were somewhere between 200?MPa and 400/600?MPa. Both HHP and UV-C significantly decreased lightness and increased pH, but did not change soluble solids content and thiobarbituric acid-reactive substances’ values. Two 2.5?min cycles of HHP at 600?MPa caused minimum APC and CC, and maximum conductivity. Compared with HHP, UV-C markedly increased protein oxidation and reduced darkening.     

Purification and Characterization of a Urethanase from Penicillium variabile

Urethanase produced by Penicillium variabile was purified through ultrasonication, concentration by polyethylene glycol 20,000, and Superdex G-200 gel filtration chromatography. The molecular weight of urethanase was determined to be around 96 kDa by gel filtration. The purified enzyme showed a single band in SDS-PAGE with the molecular weight of ~13.7 kDa, which suggests that the enzyme has a multimeric structure composed of the same subunits. Peptide map fingerprinting analysis was then carried out by MALDI/TOF-TOF MS. Within the known sequences in NCBI, glucosamine-6-phosphate deaminase and 6-phosphogluconate dehydrogenase get high score as compared with urethanase. Sequence analysis informs that N-terminal sequence of urethanase is GTNTADNDAA. The Minchaelis constant (K _m) and maximum reaction rate (V _m) of urethanase are 27.2 mmol/L and 156.25 μmol/L min, respectively.