Chaotic micromixers using two-layer crossing channels to exhibit fast mixing at low Reynolds numbers

We report two chaotic micromixers that exhibit fast mixing at low Reynolds numbers in this paper. Passive mixers usually use the channel geometry to stir the fluids, and many previously reported designs rely on inertial effects which are only available at moderate Re. In this paper, we propose two chaotic micromixers using two-layer crossing channels. Both numerical and experimental studies show that the mixers are very efficient for fluid manipulation at low Reynolds numbers, such as stretching and splitting, folding and recombination, through which chaotic advection can be generated and the mixing is significantly promoted. More importantly, the generation of chaotic advection does not rely on the fluid inertial forces, so the mixers work well at very low Re. The mixers are benchmarked against a three-dimensional serpentine mixer. Results show that the latter is inefficient at Re = 0.2, while the new design exhibits rapid mixing at Re = 0.2 and at Re of O(10(-2)). The new mixer design will benefit various microfluidic systems.     

氢部分选择性催化还原NO反应研究

在低钯含量活性非均布Pd/Al2O3催化剂上，实现了富氧条件下，氢部分选择性催化还原NO过程，低温、富氧条件下NO的转化率高达80％－100％。NO直接分解实验表明，600℃，NO分解转化率在无氧时为17．3％，有0．5％氧存在时接近于0。氢非选择性还原NO条件下，100℃以下，NO转化率为100％。根据实验结果及文献，推测了氢部分选择性还原NO过程中可能存在的反应，不同的反应温度下，NO脱除反应有所不同。在115℃以下，NO还原产物为NH3；115℃－155℃，NO还原产物为NH3、N2O和N2；155℃以上，NO还原产物中无NH3存在。NO还原反应与氢氧反应是平行的竞争反应。     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Flammability studies of 3-methyl pyridine/water system

In industrial processes, information on the safety property of chemicals is essentially crucial for safe handling during unit operations. Ensuring the safe use of combustible or flammable substances in processes is unlikely without detailed investigations of their flammability characteristics and related hazards. We studied 3-methyl pyridine (3-picoline), e.g., flammability limits (LFL/UFL), maximum explosion pressure (P _max), maximum explosion pressure rise (dP/dt)_max, minimum oxygen concentration (MOC), vapor deflagration index (K _g), and characterized the influence of inert steam (H₂O) on critical parameters for 3-picoline/water mixtures at 270°C, 1 atm, various oxygen concentrations, and vapor mixing ratios (100/0, 30/70, 10/90 and 5/95 vol.%) with a 20-L-Apparatus in simulated conditions, respectively. The results showed that the flammability characteristics of 3-picoline_(aq) all increased with the oxygen concentration. However, as the composition of inert steam increased, the flammability parameters and the degree of fire and explosion hazards were significantly reduced, instead. This study elucidated the flammability properties of 3-picoline mixed with inert steam. The conclusions could be applied to proactively prevent the relevant processes from incurring fire and explosion accidents.     

Solar Photocatalytic Degradation of 4‐Chlorophenol in Kaolinite Catalysts

This research applies semiconductor photocatalysts, which are formed by metal ion exchange on the surface of kaolinite catalyst with cations, to the study of photocatalytic degradation of 4‐chlorophenol. The analysis results of catalyst properties shows that, after sintering at 400 °C, kaolinite catalyst has a particle size of between 10–100 nm indicating the nano level of synthesized catalysts. Under the same condition, kaolinite‐Ag/Zn catalyst works better in degradation efficiency than single kaolinite‐Ag and kaolinite‐Zn catalysts. Kaolinite‐Zn catalyst declines in degradation efficacy after 150 minutes and performs poorer than the other three types of kaolinite catalysts. In the experiments of different amounts of catalysts, when the concentration exceeds 0.1 wt%, utilization of light energy and degradation efficiency will be reduced due to shielding effect. When at different pH values, the higher the pH value, the more OH‐will be released and that is beneficial for reaction with substances and the increase of reaction rate. Finally multivariate analysis proves that there is one determining factor that influences the photocatalytic degradation of 4‐chlorophenol in kaolinite catalysts, named as “the factor with intermediates competition degree,” the one affecting the 4‐CP degradation at different weight percentages that is referred to as the “shielding effect factor.”     

alpha-Aminoallylation of aldehydes with ammonia: stereoselective synthesis of homoallylic primary amines

Three-component reactions of aldehydes, ammonia, and allylboronates were found to provide homoallylic primary amines in high yields with high chemo- and stereoselectivities. A two-step, one-pot, stereoselective synthesis of an uncommon alpha-amino acid, alloisoleucine, was achieved utilizing this reaction.     

Interaction between Metal in Metallo Enzyme and Small Biological Molecules

ＩｎｔｅｒａｃｔｉｏｎｂｅｔｗｅｅｎＭｅｔａｌｉｎＭｅｔａｌｌｏＥｎｚｙｍｅａｎｄＳｍａｌｌＢｉｏｌｏｇｉｃａｌＭｏｌｅｃｕｌｅｓ￥ＨｕＪｉｅ－Ｈａｎ；ＳｈｕＺａｎ－Ｙｏｎｇ；ＴａｏＬｉ－Ｍｅｉ；ＣｈｅｎｇＧｕｏ－Ｂａｏ（ＤａｌｉａｎＩｎｓｔｉｔｕｔ...     

丙酮一步法合成甲基异丁基酮催化剂研究

用浸渍法制备了丙酮一步法合成甲基异丁基酮负载型催化剂，考察了载体的预处理温度、添加镧助剂对催化剂性能的影响；用BET法测定了催化剂的表面积；采用H2-O2滴定法测定Pd的分散度．结果发现，用经过1．023K焙烧过的Al2O3为载体的催化剂具有较好的催化性能，添加镧助剂后催化剂的分散度、活性有较大的提高．     

The effect of additives on the water solubilization capacity and conductivity in n-pentanol microemulsions

The influence of additives such as sodium salicylate and sodium chloride on the water solubilization capacity of AOT in n-pentanol solutions has been investigated. The water solubilization capacity is enhanced by sodium salicylate and decreased by sodium chloride. The percolation behavior of the water/AOT/n-pentanol system is studied by modifying the water concentration and temperature. No percolation threshold induced by water or temperature is detected either in the absence or in the presence of additives. The values of ln sigma have a linear correlation with temperature in the range of 5-40 degrees C. The activation energy is also estimated and discussed.