高速传输系统CAD/CAM齿形误差最优化算法

本文提出了一种CAD/CAM齿形误差的最优化算法。本算法收敛速度快、拟合误差小,能够按照预定设计要求对齿形精度加以控制,实现最优化自动搜索,同时给出数值计算结果。     

Raman spectroscopy of the BC3 phase obtained under high pressure and high temperature

A direct transformation of the g‐BC₃ phase to a new diamond‐like d‐BC₃ phase was observed in a diamond‐anvil cell (DAC) at high temperature, 2033 ± 241 K, and high pressure, 50 GPa. Analysis of the peak positions of the d‐BC₃, B₄C, α‐boron, and the boron‐doped diamond leads to the conclusion that the positions of the peaks of the d‐BC₃ are more similar to the peak pattern of the boron‐doped diamond rather than that of boron carbide, α‐boron. Copyright © 2007 John Wiley & Sons, Ltd.     

双折射调谐器设计的等色图原理

提出双折射调谐器设计的等色图方法，给出原理。分析表明当晶片光轴处在以折射光线为轴线、顶角为４５°的圆锥面上时，双折射调谐器具有最快的波长调谐速率；当光轴位于过折射光线并与入射面成４５°或１３５°的平面内时，调谐器抑制非所需波长的能力最强。由此给出光轴相对晶片表面的两个优化取向，对石英晶片它们分别为１８．７１２°和５９．９２２°。文中还给出了三块晶片组合的调谐器的设计例子，对其调谐特性进行了简要的讨论。     

Structural phase transition of vanadium at 69 GPa

A phase transition was observed at 63-69 GPa and room temperature in vanadium with synchrotron x-ray diffraction. The transition is characterized as a rhombohedral lattice distortion of the body-centered-cubic vanadium without a discontinuity in the pressure-volume data, thus representing a novel type of transition that has never been observed in elements. Instead of driven by the conventional s-d electronic transition mechanism, the phase transition could be associated with the softening of C44 trigonal elasticity tensor that originates from the combination of Fermi surface nesting, band Jahn-Teller distortion, and electronic topological transition.     

菌紫质薄膜光致折射率变化的理论计算和实验测量

基因改性细菌视紫红质BR-D96N由于M态寿命的延长而具有显著的光致变色特性.根据Kramers-Kronig变换关系,样品吸收光谱的变化会引起样品折射率的变化.本文首先从实验上测量了BR-D96N薄膜样品在光激发前后的吸收光谱,然后根据Kramers-Kronig变换关系,理论计算了对应此光致变色光谱变化的光致折射率变化光谱.实验上为了直接测量样品的光致折射率变化,采用Michelson干涉方法测量BR-D96N薄膜在不同探测波长下的光致折射率变化量,并与理论计算曲线进行了比较.     

闪烁体荧光传输特性对ETOF探测器性能的影响

为了对BESⅢ端盖飞行时间探测器(ETOF)的测试结果给出合理的解释, 采用Monte Carlo模拟软件包Geant4, 对该探测器测量高能带电粒子的性能进行模拟研究. 详细探讨了当粒子击中ETOF模块不同位置时, 其闪烁体荧光传输特性与探测器模块输出信号之间的关联, 以及PMT输出信号甄别阈值的选取对闪烁探测器本征时间分辨的影响, 并寻找可能的改善时间分辨的方法. 为进一步提高ETOF的性能提供参考.     

Mode power distribution effect in white-light multimode fiber extrinsic Fabry-Perot interferometric sensor systems

Theoretical and experimental results have shown that mode power distribution (MPD) variations could significantly vary the phase of spectral fringes from multimode fiber extrinsic Fabry-Perot interferometric (MMF-EFPI) sensor systems, owing to the fact that different modes introduce different extra phase shifts resulting from the coupling of modes reflected at the second surface to the lead-in fiber end. This dependence of fringe pattern on MPD could cause measurement errors in signal demodulation methods of white-light MMF-EFPI sensors that implement the phase information of the fringes.     

Langmuir-Blodgett self-assembly and electrochemical catalytic property of FePt magnetic nano-monolayer

Dispersed-well FePt nanoparticles with particle size ~5 nm have been prepared by hydrazine hydrate reduction of H₂PtCl₆·6H₂O and FeCl₂·4H₂O in ethanol–water system. By employing as-synthesized FePt nanoparticles, the monolayer can be formed by LB Technique. The structural, magnetic properties and electrochemical properties of FePt monolayer were respectively studied by XRD, TEM, VSM and CHI 820 electrochemical workstation. The as-synthesized particle has a chemically disordered fcc structure and can be transformed into chemically ordered fct structure after annealing treatment above 400°C. The coercivity of ordered fct FePt phase can be up to 2515Oe. CVs of 0.5 M H₂SO₄/0.5M CH₃OH on GCE modified with FePt nanoparticles monolayer films illustrate that the as-synthesized FePt is a kind of active electrochemical catalyst.