A convenient synthesis of olefins via deacylation reaction

A convenient and environmentally-friendly synthetic method of olefins via deacylation reaction is described. The reaction gives olefins by condensation of aldehydes with a variety of 1,3-dicarbonyl compounds in the presence of anhydrous potassium carbonate at room temperature in high yields (70-90%) in one step. The synthetic potential of this strategy can be used as an alternative procedure to the Wittig, Wittig-Horner reactions. The stereochemistry of the resulted olefins was determined by NOE experiment with correct radio frequency and X-ray analysis. The E/Z selectivity of the deacylation reaction depends on the α-substituents of the 1,3-dicarbonyl compounds.     

Color change (yellow \documentclass{article}\pagestyle{empty}\begin{document}$\rightleftharpoons$\end{document} orange) of 4,6,7-tri(alkoxy-substituted aryl)-1,2,5-thiadiazolo[3,4-c]pyridines in the solid phase

Reversible color change of 4,6,7-tri(alkoxy-substituted phenyl)-1,2,5-thiadiazolo[3,4-c]pyridines 5 in the solid state was observed: on grinding, yellow crystals of 5 became an orange amorphous solid which, on heating or washing with an appropriate solvent, gave the original yellow crystals.     

Mode of action and biosynthesis of the azabicycle-containing natural products azinomycin and ficellomycin

Only a handful of aziridine-containing natural products have been identified out of the more than 100,000 natural products characterized to date. Among this class of compounds, only the azinomycins (azinomycin A and B) and ficellomycin contain an unusual 1-azabicyclo[3.1.0]hexane ring system, which has been reported to be the reason for theDNAcrosslinking abilities and cytotoxicity of these metabolites. Both families of natural products are produced by Streptomyces species, Streptomyces sahachiroi and Streptomyces ficellus, respectively. Up until recently, much of the work on these molecules has focused on the synthesis of these natural products or their corresponding analogs for in vitro investigations evaluating their DNA selectivity. While one of the most intriguing aspects of these natural products is their biosynthesis, progress made in this area was largely impeded by difficulties with obtaining a reliable culture method and securing a consistent source of these natural products. In this review, we will cover the discovery and biological activity of the azinomycins, their mode of action, related synthetic analogs and biosynthesis, and finish with a discussion on the less studied metabolite, ficellomycin.     

Roles of hydrophobic interaction in a volume phase transition of alkylacrylamide gel induced by the hydrogen-bond-driving alkylphenol binding

It was found that a degree of the binding of alkylphenols to N-alkylacrylamide gel increased transitionally to induce the volume phase transition of gel. Binding isotherms of nonylphenol (n-Ph), propylphenol (p-Ph), ethylphenol (e-Ph), methylphenol (m-Ph), and phenol (Ph) to N-isopropylacrylamide (NIPA), N,N-diethylacrylamide (DEA), N,N-dimethylacrylamide (DMA), and acrylamide (AM) gels were examined. Two types of binding, the site binding at beta < 1 and the multimolecular binding at beta > 1, were observed, where beta was a degree of binding to a monomeric unit of the chain. The former binding was analyzed with the Hill equation applicable to the cooperative binding and the latter binding with the Brunauer-Emmett-Teller (BET) equation applicable to the multilayer adsorption. The binding constant, K, and the Hill coefficient, N, decreased and increased, respectively, in the order of DEA, NIPA, and DMA gels in the case where the binding alkylphenol was the same. The K value increased in the order of Ph, m-Ph, e-Ph, p-Ph, and n-Ph that bound to the same type of gel. The N value was found to change little with the type of binding alkylphenol. The complexes of N-alkylamide with alkylphenol were condensed to form the ordered nanostructures that were observed as broad scattering peaks in small-angle X-ray scattering experiments. The fluorescence excimer emission was observed for the phenol-binding DMA gel, which corresponded to the condensed state of phenol.     

Photocrosslinking system based on a poly(vinyl phenol)/thermally degradable diepoxy crosslinker blend

Photocrosslinkable systems with thermally cleavable properties based on blends of poly(vinyl phenol) (PVP) and diepoxides were investigated. Thermally cleavable diepoxides as crosslinkers were prepared and characterized. As a thermally cleavable linkage, a tertiary ester moiety was incorporated into the crosslinker molecule. PVP/crosslinker blended films containing photoacid generators (PAGs) became insoluble in solvents after UV irradiation and subsequent post‐exposure‐bake (PEB) treatment. With a rise in the PEB temperature, the insoluble fraction of the irradiated films increased, passed through a maximum value, decreased, and increased again at elevated baking temperatures. The insolubilization profiles of the irradiated films were complicated and strongly dependent on the type of PAG used, the structure of the crosslinkers, and the PVP/crosslinker ratio. A mechanism for the thermal degradation was studied with Fourier transform infrared spectroscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3055–3062, 2002     

Synthesis and Aromaticity of Benzene-Fused Doubly N-Confused Porphyrins

A bicyclo[2.2.2]octadiene(BCOD)-fused bis(dipyrromethane) derivative was reacted with methylal in the presence of trifluoroacetic acid followed by oxidation with chloranil to give a doubly N-confused phlorin derivative, which did not undergo the retro-Diels–Alder reaction extruding an ethylene molecule on heating. In contrast, a 7-tert-butoxybicyclo[2.2.1]heptadiene(7-BuOBCHD)-fused bis(dipyrromethane) yielded benzene-ring-fused doubly N-confused porphyrins by following similar reaction sequences.     

Theoretical studies on the electrocyclic reactions of bis(allene) and vinylallene. Role of allene group

The reaction mechanisms of the electrocyclic ring closure of bis(allene) and vinylallene were studied by ab initio MO methods. The conrotatory and disrotatory pathways of the electrocyclic reactions from bis(allene) to bis(methylene)cyclobutene were determined by a CASSCF method. The transition state on the conrotatory pathway is 26.8 kcal/mol above bis(allene) and about 23 kcal/mol lower than that on the disrotatory pathway at a MRMP calculation level. The activation energy on the conrotatory pathway is lower by 23 kcal/mol than that of the electrocyclic reaction of butadiene. This lower energy barrier comes from the interactions of the "side pi orbitals" of the allene group. The interaction of the "vertical pi orbitals" of the allene group is predominant at the early stage of the reaction. The activation energy of the electrocyclic reaction of vinylallene is about 8.5 kcal/mol higher than that on the conrotatory pathway of bis(allene).     

Nanocrystals Assembled by the Chemical Reaction of the Dispersion Solvent

The development of methods to pattern nanocrystals with different sizes and shapes remains a challenge. In this study, we demonstrate a unique class of bottom‐up approaches to assemble nanocrystals into patterns. Our approach for patterning nanocrystals focuses on the utilization and control of the chemical reaction of solvents surrounding nanocrystals. The photopolymerization of solvent molecules through a photomask creates time‐dependent concentration gradients of the solvents. Dispersed nanocrystals such as silver nanowires (AgNWs) migrate and are gradually organized and integrated into the polymerizing films based on the concentration gradients. The AgNW‐embedded film properties are determined by the organized AgNW structures and include light transmission and electrical conductivity. Overall, the demonstrated method is very simple, widely applicable to various nanocrystals and solvents, and can thus contribute to the development of a new class of nanocrystal patterning methods.     

Theoretical studies on Myers-Saito and Schmittel cyclization mechanisms of hepta-1,2,4-triene-6-yne

The mechanisms of the Myers-Saito cyclization and the Schmittel cyclization of hepta-1,2,4-triene-6-yne are studied by ab initio multireference MO methods (CASSCF and MRMP2 methods). For the Myers-Saito cyclization, two transition states with C(s) and C? symmetries are located. The transition state with C1 symmetry is only 1.5 kcal/mol lower in energy than that with C(s) symmetry at the MRMP2 calculation level. The obtained activation energy at the transition state with C? symmetry and the reaction energy are 16.6 and 16.2 kcal/mol exothermic, respectively. For the Schmittel cyclization, two transition states with C(s) and C? symmetry are also obtained. The transition state with C? symmetry is 7.9 kcal/mol lower in energy than that with C(s) symmetry. The transition state with C? symmetry for Schmittel cyclization is 6.7 kcal/mol higher in energy than that for the Myers-Saito cyclization. The reaction mechanisms are analyzed by a CiLC-IRC method. The interactions of orbitals for the Myers-Saito and Schmittel cyclizations can be distinguished.