随机过程数值仿真的精度实验与分析

为了考核随机过程数值仿真中采用的混沌多项式展开,小波动态自适应网格等的可靠性和近似程度,本文构造了一个具有解析解的随机过程,随后进行数值仿真。比较了数值仿真结果与解析解,证明两者是相互一致的。说明所采用的数值仿真方法是成立和近似度是可以接受的。所进行比较的随机过程解析解是相对比较简单的,当对更复杂的情况需要进一步数值实验验证。在文中并讨论了影响数值仿真精度和增加数值仿真工作难度的因素。     

Suppressing entanglement sudden death by initial system-environment correlation

This paper studies the entanglement dynamics of the system S composed of two non-interactional qubits A and B. The third qubit C is its environment, E, which only interacts with the S qubit B by the Dzyaloshinskii-Moriya spin-orbit coupling. Considering the following states as the whole (S+E): the initially S-E correlated state and the separable one, the entanglement of S has no sudden death for the former case. This result sheds some light on the control of quantum entanglement, which will be helpful for quantum information processing.     

固定平滑参数的Pickands估计量的大分位数之估计

{X_i}_(i=1)~∞是具有公共分布函数F(x)的i.i.d序列,F(x)属于吸引场D(G_γ)(γ∈R)之一.在一定条件下,给出了固定平滑参数的F(x)的大分位数估计量的渐进分布,进而可得其渐进置信区间.     

负载型钙钛矿La0.8Sr0.2MnO3/SBA-15催化燃烧甲苯的研究

采用逐层负载-孔道内氨/水蒸气原位羟化法制备了一系列负载型钙钛矿La_0.8Sr_0.2MnO₃/SBA-15催化剂,用XRD、BET、TG-DTG、XPS、H₂-TPR等手段对催化剂的物性结构等进行了表征,并在常压连续流动固定床反应器上评价了该催化剂对甲苯催化燃烧的催化性能。结果表明,逐层负载-孔道内氨/水蒸气原位羟化法的使用有助于活性组分La_0.8Sr_0.2MnO₃进入SBA-15的孔道,并在SBA-15上形成钙钛矿结构。La_0.8Sr_0.2MnO₃/SBA-15上钙钛矿结构的形成和晶格氧的出现,可为催化剂提供较多的活性中心,有利于其催化燃烧甲苯的活性。     

煤焦与生物质焦共气化反应特性研究

以晋城无烟煤和生物质(肉骨粉Meat and Bone Meal:MBM)为原料,在固定床上采用快速热解法制备了煤和生物质焦样。采用扫描电子显微镜结合X射线能谱分析仪(SEM-EDX)分析了煤焦和MBM焦的表面形态和组成;在热天平上采用等温热重法进行了煤焦/MBM焦混合物的水蒸气气化研究。实验结果表明,煤/MBM焦混合物的共气化实验碳转化率高于两者不存在协同作用时的计算值,这是由于MBM焦含有较多的Na、Ca等元素,这些物质对煤焦气化起到了催化作用。当对MBM焦进行脱灰处理后,其气化反应性显著下降。混合物中MBM焦的质量分数在20%~80%时,随着MBM焦含量的增加,混合物中的煤焦反应性相应提高。     

q-Bernstein-Durrmeyer型算子的逼近性质

基于q-整数概念,引进一类q-Bernstein-Durrmeyer型算子,研究该算子列的一些逼近性质.得到算子列的一个Korovkin型收敛定理,并给出算子列收敛速度的一些估计和一个Voronovskaja型结果.     

Numerical studies of penetration problems by an improved particle method

A particle mapping transportation algorithm was proposed on the basis of the particle-in-cell method.The particles with rectangular influence domains were employed in the transportation algorithm to reduce the numerical fluctuations.Based on the error analysis in the process of particle motion computation,a prediction-correction algorithm was introduced to improve the computational accuracy.Furthermore,the performance of the particle mapping transportation method was evaluated by using the rotation,the slotted disk and the shear advection tests,and the results were compared with other interface reconstruction methods.Finally,the hemispherical projectile penetration into a steel target was numerically simulated.The results showed that the proposed method produced less numerical fluctuations and exhibited clear material interfaces,which indicated that it is accurate and effective.     

The separation single-wall carbon nanotubes on length by sepharose gel

The separations of single-wall carbon nanotubes on length by sepharose gel were investigated in this work. The solutions of sodium dodecyl sulfate and sodium deoxycholate were applied as the eluent in sequence. SEM and Raman were used to characterize the length of nanotube bundles. The results show that the longer nanotubes were eluted out first, and then the shorter tubes were followed by the sodium dodecyl sulfate. However, the separated order was totally reversed by the sodium deoxycholate. By this method, the process generated nanotube fractions not only were narrower in length distributions, but also could control the separation orders by changing the eluents. Moreover, the separation principle was also discussed.     

高中化学课程模块设置的反思及建议

结合普通高中新课程化学学科模块教学的实际情况,分析了现行化学学科模块教学体系中知识体系松散、实验教学弱化以及教科书繁多等主要问题和不足,提出了必修模块重学科基础及知识体系、选修模块重个人爱好和专业发展等改进和优化高中化学学科模块体系的若干建议。     

高冲击随弹测试固态记录器的设计与应用

为记录爆炸高冲击信号,设计了随弹测试固态记录器。该固态记录器以FPGA器件XC2S30为核心处理芯片,在其内部的A/D控制器、高速状态机、相位延迟时钟和闪存控制器的共同作用下,能够将高冲击信号转换成数字信号并存储到由闪存构成的主存储器中。利用设计的固体记录器并结合多层缓冲和双层钢套保护结构,成功地记录了炮弹爆炸抛撒和炮击试验中的全程高冲击信号。