Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

UV luminescent organic-capped ZnO quantum dots synthesized by alkoxide hydrolysis with dilute water

A novel synthesis route to organic-capped and colloidal ZnO quantum dots (QDs) has been developed. Specifically, zinc-di-t-butoxide and zinc-di-n-butoxide are hydrolyzed by very dilute water (400-600 mass ppm) in hydrophilic benzylamine and polymerized to ZnO by dehydration and/or a butanol elimination reaction. Growth of the ZnO QDs and exchange of the surface capping ligand from the hydroxyl groups and/or benzylamine to the oleylamine occur by heating the colloidal solution after addition of the oleylamine at 100-180°C. The final ZnO QDs with diameters in the range of 3-7 nm are highly dispersible in various organic solvents. The ZnO QDs exhibit the quantum size effect upon UV emission; it was controlled between 3.39 and 3.54 eV in the present study. The defect-related Vis emission decreased and the UV emission becomes dominant when zinc-di-n-butoxide with a 99.99% zinc purity is used as the starting material. The intensity of the photoluminescence UV emission is 1.5 times higher than that of the Vis emission.     

Development and validation of a hydrophilic interaction chromatography–tandem mass spectrometry for quantification of nicotine and its metabolites in human maternal and cord sera

A selective and sensitive HILIC‐MS/MS method for the simultaneous quantification of nicotine and its metabolites in human maternal and cord sera was developed and validated. After solid‐phase extraction, LC separation was achieved on a hydrophilic interaction chromatography. The validated method is capable of selective identification as well as accurate and sensitive quantification. Analyte recovery ranged from 86.2 to 107.7% and intra‐ and inter‐day assay precision were less than 15% relative standard deviation. This sensitive HILIC‐MS/MS method can be used to determine nicotine and its metabolic profile in smokers. This validated method is useful for the determination of nicotine and its metabolites in human serum in future studies of the effects of nicotine exposure on neonatal outcome. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Selective synthesis of poly(p‐oxybenzoyl) by fractional polycondensation: Enhancement of selectivity by shearing

The influence of shear flow, especially the timing for the application of shearing, was examined to enhance the selectivity for the preparation of poly(p‐oxybenzoyl) (Pp‐OB) by using hydrodynamically induced phase separation during polymerization of 4‐(4‐acetoxybenzoyloxy)benzoic acid (p‐ABAD) and m‐acetoxybenzoic acid (m‐ABA). The polymers containing few m‐oxybenzoyl (m‐OB) moieties were obtained as precipitates even at high content of m‐OB moiety in feed (χ_f) under shear flow. The content of m‐OB moiety in the precipitates (χ_p) prepared under shearing throughout the polymerization at the shear rate (γ) of 489 s^?1 was 6.3 mol % even at χ_f of 60 mol %. Especially, the Pp‐OB was obtained as the precipitates at χ_f of less than 50 mol %. The timing of the application of the shearing influenced the selectivity significantly, and the shearing just after the precipitation of the oligomers started was quite efficient to enhance the selectivity more. The χ_p of the precipitates prepared with shearing at γ of 489 s^?1 just after the precipitation was only 3.9 mol % even at χ_f of 60 mol %. The shear flow reduced the difference in the reactivity between p‐ABAD and m‐ABA, resulting in the decrease in the selectivity with regard to the formation of p‐oxybenzoyl homo‐oligomer. However, the shear flow enhanced the difference in the miscibility between homo‐oligomers and co‐oligomers. This change in the miscibility by shear flow brought about the more rapid precipitation of homo‐oligomers, leading to the enhancement of the selectivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and DNA‐binding properties of 1,10‐phenanthroline analogues as intercalating‐crosslinkers

We synthesized a series of bis(bromomethyl)‐1,10‐phenanthrolines as novel anticancer lead compounds and examined their DNA‐binding properties. 5,6‐Bis(bromomethyl)‐1,10‐phenanthroline showed DNA intercalating activity and DNA crosslinking activity, furthermore it is stable in aqueous solution.     

Preparation of apatite-type-silicate-supported precious metal catalysts for selective catalytic reduction of NOx

Apatite-type silicate supported precious metal catalysts were prepared and investigated for their catalytic activity in selective catalytic NO reduction. Single-phase La_9.33Si₆O₂₆ and La_8.33ASi₆O_25.5 (A=Ca, Sr, Ba) were obtained by a sol-gel method. Pd/La_9.33Si₆O₂₆ catalyst exhibited high activity for oxidation of C₃H₆, comparable to Pd/Al₂O₃ catalyst, although the specific surface area of La_9.33Si₆O₂₆ was lower than that of Al₂O₃. In addition, Pt/La_9.33Si₆O₂₆ catalyst exhibited higher activity for selective catalytic reduction of NO than Pt/Al₂O₃ catalyst. Substitution of Ba²⁺ for La³⁺ of La_9.33Si₆O₂₆ led to increased catalytic activity at low temperature.     

Evaluation of TA10 broth for recovery of heat- and freeze-injured Salmonella from beef

The Bacteriological Analytical Manual (BAM) Salmonella pre-enrichment broth [lactose (LAC) broth], buffered peptone water, and universal pre-enrichment (UP) broth were compared with TA10 broth, developed in our laboratory, for recovery of heat- and freeze-injured Salmonella (55 degrees C for 2-20 min and -20 degrees C for 2 months, respectively) from beef. Beef samples were contaminated with single Salmonella serovars, and contamination levels of 0.44 to <0.001 most probable number (MPN)/g and 0.74 to 0.14 MPN/g were used for heat- and freezing-induced injury studies, respectively. Twenty test portions (25 g) of the contaminated beef were pre-enriched in each broth, and the BAM Salmonella culture method was used thereafter. There was a significant difference (chi2 = 7.73) in recovery of heat-injured Salmonella between TA10 broth and LAC broth, 189 (67.5%) versus 156 (55.7%) positive samples, respectively, determined by plating onto selective agars and identification by biochemical tests. For the recovery of freeze-injured Salmonella, there was a significant difference (chi2 = 24.7) between TA10 and LAC broth, 189 (72.7%) versus 133 (51.2%) positive samples, respectively. TA10 broth was more effective than LAC broth and UP broth for recovery of freeze-injured Salmonella. The results indicate that TA10 broth should be used instead of LAC broth for testing of beef that may be contaminated with heat- and freeze-injured Salmonella spp.     

pH-responsive aqueous foams stabilized by hairy latex particles

Polystyrene (PS) latex particles carrying pH-responsive poly[2-(diethylamino)ethyl methacrylate] (PDEA) hair (PDEA-PS particles) were synthesized by dispersion polymerization and characterized in terms of diameter, diameter distribution, morphology, chemical composition, surface chemistry, and pH-response using scanning electron microscopy (SEM), elemental microanalysis, (1)H nuclear magnetic resonance spectroscopy, the laser diffraction method, and zeta potential measurements. The hairy particles can act as pH-responsive stabilizers of aqueous foams by adsorption at the air-water surface. Above pH 8.0, where particles have nonprotonated PDEA hair, which is relatively hydrophobic, particle-stabilized foams are stable for at least 1 month. Optical microscopy and SEM confirmed that flocculated PDEA-PS latex particles were adsorbed at the air-water interface and stabilized the aqueous foams. At pH 6.1 and 7.1, relatively stable foams can be prepared that remain stable for at least 24 h. SEM studies indicated that the PDEA-PS particles were adsorbed at the air-water interface as a monolayer at pH 6.1. At pH 5.1 and 3.1, where the particles have cationic water-soluble PDEA hairs with hydrophilic character, no foam was formed. Rapid defoamation can be induced by lowering the solution pH; the addition of acid caused the in situ protonation of 2-(diethylamino)ethyl methacrylate residues, which impart water-soluble hydrophilic character to the PDEA hair, and the PDEA-PS particles desorbed from the air-water interface. The foaming and defoaming cycles could be repeated at least five times.