Conformation of solvent N,N-dimethylpropionamide in the coordination sphere of the zinc(II) ion studied by Raman spectroscopy and DFT calculations

Solvation structure of the zinc(II) ion in N,N-dimethylpropionamide (DMPA) was studied by Raman spectroscopy at varying temperature and by quantum mechanical calculations. No significant ion-pair formation was found for the Zn(ClO4)2 solution in the molality range m(Zn) < 1.5 mol kg(-1), and the solvation number of the zinc(II) ion was determined to be 4, indicating that 6-coordination of DMPA is sterically hindered. Interestingly, DMPA molecules are under equilibrium between planar cis and nonplanar staggered conformers, and the latter is more preferred in the coordination sphere, while the reverse is the case in the bulk. The DeltaG degrees , DeltaH degrees , and TDeltaS degrees values of conformational change from planar cis to nonplanar staggered in the coordination sphere were obtained to be -0.9, -8.5, and -7.5 kJ mol(-1), respectively. Density functional theory (DFT) calculations show that the planar cis conformer is more favorable than the nonplanar staggered one in the 1:2 cluster, as is the case for a single DMPA molecule and H(DMPA)+, indicating that there hardly occurs solvent-solvent interaction through the metal ion in the Zn2+-DMPA 1:2 cluster. On the other hand, the SCF energy of [Zn(planar cis-DMPA)4-n(nonplanar staggered DMPA)n]2+ (n = 0-4) decreases with increasing n, implying that the nonplanar staggered conformer is preferred in the solvate ion. It is thus concluded that solvent-solvent interaction through space, or solvation steric effect, plays a crucial role in the conformational equilibrium in the coordination sphere of the four-solvate metal ion.     

Photoinduced magnetization in copper octacyanomolybdate

This article describes the studies of a photomagnetic cyanide-bridged Cu-Mo bimetallic assembly, Cu(II)(2)[Mo(IV)(CN)(8)].8H(2)O (Cu(II), S = (1)/(2); Mo(IV), S = 0) (1), which has an intervalence transfer (IT) band from Mo(IV)-CN-Cu(II) to Mo(V)-CN-Cu(I) around 480 nm. Wide-angle X-ray scattering and X-ray spectroscopic studies provide precise information about the 3D connectivity and the local environment of the transition metal ions. Irradiating with blue light causes solid 1 to exhibit a spontaneous magnetization (Curie temperature = 25 K). The thermal reversibility is carefully studied and shows the long-time stability of the photoinduced state up to 100 K. Photoreversibility is also observed; i.e., the magnetization is induced by irradiation with light below 520 nm, while the magnetization is reduced by irradiation with light above 520 nm. The UV-vis absorption spectrum after irradiation shows a decrease of the IT band and the appearance of the reverse-IT band in the region of 600-900 nm (lambda(max) = 710 nm). This UV-vis absorption spectrum is recovered to the original spectrum by irradiation with 658-, 785-, and 840-nm light. In this photomagnetic effect, the excitation of the IT band causes an electron transfer from Mo(IV) to Cu(II), producing a ferromagnetic mixed-valence isomer of Cu(I)Cu(II)[Mo(V)(CN)(8)].8H(2)O (Cu(I), S = 0; Cu(II), S = (1)/(2); Mo(V), S = (1)/(2)) (1'). 1' returns to 1 by irradiation of the reverse-IT band, which obeys the scheme for the potential energy surface in mixed-valence class II compounds.     

Metal ions dramatically enhance the enantioselectivity for lipase-catalysed reactions in organic solvents

We propose a simple and a powerful method to enhance the enantioselectivity for lipase-catalysed transformations in organic solvents by an addition of metal ion-containing water to the reaction mixture. In this paper, various metal ions such as LiCl or MgCl2 are tested to improve the enantioselectivity for the model reactions. The enantioselectivities obtained are dramatically enhanced, the E values of which are about 100-fold as compared with the ordinary conditions without a metal ion, for example, E = 200 by addition of LiCl. Furthermore, lowering the reaction temperature led to an almost perfect enantioselectivity of lipase in the presence of a metal ion, for example, E = 1,300 by addition of LiCl. Also, a mechanism for the drastic enhancement by metal ions is discussed briefly on the basis of the EPR spectroscopic study and the initial rate for each enantiomer of the substrate.     

Structure of cypridina biluciferyl,a dimer of cypridina luciferyl radical having bioluminescent activity

Structure of $\text{Cypridina}$ biluciferyl (luciferyl radical dimer), which is produced by chemical oxidation of $\text{C}$. luciferin with such as ferricyanide, was determined to be the symmetric 5,5′-dimer of $\text{C}$. luciferin. It gives light in the presence of $\text{C}$. luciferase, although the bioluminescent rate is very low. We suggest that the biluciferyl is an intermediate in the oxidation of the luciferin to $\text{C}$. luciferinol.     

A versatile scaffold for facile synthesis of fluorescent cyano-substituted stilbenes

Here we report the facile derivatization of a cyano-substituted stilbene into higher π-extended analogues. The cyano-substituted stilbene, which serves as a synthetic scaffold, has a bromo group and a formyl group on its 4- and 4′-position of the phenylene rings and thus readily undergoes selective transformation into other functional groups using various simple organic reactions. The resultant π-conjugated molecules that contain a cyano-substituted stilbene skeleton exhibit fluorescence in solution and in the solid state.     

Adsorption and separation of poly-aromatic hydrocarbons by a hydrogen-bonded coordination polymer

A residual-host prepared by thermal removal of naphthalene (NA) from the inclusion compound [Ni(SCN)(2)(isonicotinic acid)(2)]·(NA)(0.5) was found to function as an adsorbent for aromatic molecules and exhibit method-dependent selectivity.     

Preparation,crystal structure,and spectroscopic,chemical, and electrochemical properties of (2E,4E)-1,4-di(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-1,2-di(3-guaiazulenyl)ethylene

Wittig reaction of (E)-3-(3-guaiazulenyl)propenal (11) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (9) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title new (2E,4E)-1,3-butadiene derivative 4, in 33% isolated yield, which upon treatment with hexafluorophosphoric acid (i.e., 65% HPF₆ aqueous solution) in tetrahydrofuran (=THF) at 25 °C for 1 h under aerobic conditions affords a new air (two-electron) oxidation product (E)-ethylene-1,2-bis(3-guaiazulenylmethylium) bis(hexafluorophosphate) (14), quantitatively, and further, zinc-reduction of 14 in trifluoroacetic acid (=CF₃COOH) at 0 °C for 1 h under argon reverts 4, quantitatively. Along with the above interesting results, our discovered another preparation method, spectroscopic properties, crystal structure, and electrochemical behavior of 4, which serves as a strong two-electron donor and acceptor, compared with those of the previously reported (E)-1,2-di(3-guaiazulenyl)ethylene (3) are documented in detail.     

Photothermal Oxidation of Cinnamyl Alcohol with Hydrogen Peroxide Catalyzed by Gold Nanoparticle/Antimony-Doped Tin Oxide Nanocrystals

Gold nanoparticles with different mean sizes were formed on antimony-doped tin oxide nanocrystals by the temperature-varied deposition-precipitation method (Au/ATO NCs). Au/ATO NCs possess strong absorption in the near-infrared region due to Drude excitation in addition to the localized surface plasmon resonance (LSPR) of AuNPs around 530 nm. Au/ATO NCs show thermally activated catalytic activity for the oxidation of cinnamyl alcohol to cinnamaldehyde by hydrogen peroxide. The catalytic activity increases with a decrease in the mean Au particle size (d_Au) at 5.3 nm≤d_Au≤8.2 nm. Light irradiation (λ_ex >660 nm, ∼0.5 sun) of Au/ATO NCs increases the rate of reaction by more than twice with ∼95 % selectivity. Kinetic analyses indicated that the striking enhancement of the reaction stems from the rise in the temperature near the catalyst surface of ∼30 K due to the photothermal effect of the ATO NCs.     

Synthesis of hollow CaCO3 nanospheres templated by micelles of poly(styrene-b-acrylic acid-b-ethylene glycol) in aqueous solutions

An asymmetric triblock copolymer, poly(styrene-b-acrylic acid-b-ethylene glycol) (PS-b-PAA-b-PEG), was synthesized via reversible addition-fragmentation chain transfer controlled radical polymerization. Micelles of PS-b-PAA-b-PEG with PS core, PAA shell, and PEG corona were then prepared in aqueous solutions, followed by extensive characterization based on dynamic light scattering, zeta-potential, and transmission electron microscopy (TEM) measurements. The well-characterized micelles were used to fabricate hollow nanospheres of CaCO(3) as a template. It was elucidated from TEM measurements that the hollow nanospheres have a uniform size with cavity diameters of ca. 20 nm. The X-ray diffraction analysis revealed a high purity and crystallinity of the hollow nanospheres. The hollow CaCO(3) nanospheres thus obtained have been used for the controlled release of an anti-inflammatory drug, naproxen. The significance of this study is that we have overcome a previous difficulty in the synthesis of hollow CaCO(3) nanospheres. After mixing of Ca(2+) and CO(3)(2-) ions, the growth of CaCO(3) is generally quite rapid to induce large crystal, which prevented us from obtaining hollow CaCO(3) nanospheres with controlled structure. However, we could solve this issue by using micelles of PS-b-PAA-b-PEG as a template. The PS core acts as a template that can be removed to form a cavity of hollow CaCO(3) nanospheres, the PAA shell is beneficial for arresting Ca(2+) ions to produce CaCO(3), and the PEG corona stabilizes the CaCO(3)/micelle nanocomposite to prevent secondary aggregate formation.     

Thiol-terminated hydroxy-functional polymer as a transtab toward polymer latex particles

Hydroxy-functional macrodisulfides have been synthesized by atom transfer radical polymerization of 2-hydroxyethyl methacrylate or 2-hydroxypropyl methacrylate in 2-propanol. Mean degrees of polymerization of the polymer chains beside the disulfide were fixed at 30, 60, and 90; since ATRP has reasonably good living character, the molecular weight distribution is relatively narrow. Furthermore, the macrodisulfides were reduced to synthesize corresponding thiol-terminated polymers with relatively narrow molecular weight distributions. ¹H nuclear magnetic resonance and gel permeation chromatography were used to characterize the macrodisulfides and thiol-terminated polymers in terms of their chemical structure, molecular weight, and polydispersity, respectively. Dispersion polymerizations of styrene using the thiol-terminated hydroxy-functional polymers as a transtab (chain transfer agent + colloidal stabilizer) in ethanol resulted in colloidally stable submicrometer-sized polystyrene latex particles. Scanning electron microscopy, Fourier transform infrared spectroscopy, and elemental microanalysis were used to characterize the particles in terms of their morphologies, particle sizes and their distributions, and chemical compositions.