Studies of the out-of-plane emission of pions in symmetric heavy-ion collisions

Triple differential cross-sections of midrapidity pions from ²⁰⁹Bi+²⁰⁹Bi collisions were measured with the Kaon Spectrometer at SIS at incident energies of 400, 700 and 1000 AMeV. The azimuthal emission pattern of the pions has been investigated in dependence of beam energy and impact parameter. An enhanced emission of pions perpendicular to the reaction plane is observed. The strength of the anisotropy increases with beam energy and pion transverse momentum. In contrast to the nucleons the anisotropy varies only little with the impact parameter. No difference in the behaviour of positive and negative pions is observed.     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Beam-polarization asymmetries for the p(gamma-->, K+)Lambda and p(gamma-->, K+)Sigma(0) reactions for E(gamma)=1.5-2.4 GeV

Beam polarization asymmetries for the p(gamma-->,K+)Lambda and p(gamma-->,K+)Sigma(0) reactions are measured for the first time for E(gamma)=1.5-2.4 GeV and 0.6相似文献   

Mode-order converter in a multimode waveguide

A novel device that converts the order of modes in an integrated-optic multimode waveguide was proposed and fabricated. The device consists of two mode splitters and tapered waveguides. Its operation at a wavelength of 1.55 microm was confirmed by observation of the output mode profiles. The cross talk measured by an indirect method was >10.2 dB. The excess loss with reference to a straight multimode waveguide was 1.5 dB, compared with the propagation loss of a straight multimode waveguide.     

Measurement Accuracy in Phase-Shifting Point Diffraction Interferometer with Two Optical Fibers

A phase-shifting point diffraction interferometer (PS/PDI) with point sources of two single mode optical fibers has been developed, which will be appropriate for the surface figure measurement of large aperture optics on a sub-nanometer scale. To reduce the measurement error factors, a fiber optic plate (FOP) is used as a projection plane for interference pattern. Errors caused by imperfection of optical alignment, such as position of point sources and tilt of FOP, are minimized by analyzing the measured phase data with an original method. Measurement accuracy in the PS/ PDI is estimated with the interference pattern produced by the two optical fiber sources. If inhomogeneity of the FOP and a systematic error of the PS/PDI are eliminated, the measurement accuracy of the present system is estimated to be less than 4nm P-V and 0.7nm rms, respectively, at a measurement wavelength of 632.8 nm.     

Transformation mechanism of n-butyl terminated Si nanoparticles embedded into Si1−xCx nanocomposites mixed with Si nanoparticles and C atoms

Bright-field transmission electron microscopy (TEM) images, high-resolution TEM (HRTEM) images, and fast-Fourier transformed electron-diffraction patterns showed that n-butyl terminated Si nanoparticles were aggregated. The formation of Si_1−xC_x nanocomposites was mixed with Si nanoparticles and C atoms embedded in a SiO₂ layer due to the diffusion of C atoms from n-butyl termination shells into aggregated Si nanoparticles. Atomic force microscopy (AFM) images showed that the Si_1−xC_x nanocomposites mixed with Si nanoparticles and C atoms existed in almost all regions of the SiO₂ layer. The formation mechanism of Si nanoparticles and the transformation mechanism of n-butyl terminated Si nanoparticles embedded into Si_1−xC_x nanocomposites mixed with Si nanoparticles and C atoms are described on the basis of the TEM, HRTEM, and AFM results. These results can help to improve the understanding of the formation mechanism of Si nanoparticles.     

Depth-controlled reconstruction of 3D integral image using synthesized intermediate sub-images

In this paper, we propose a method that controls the depth of the three-dimensional (3D) object existing over the depth-of-focus in integral imaging. The depth control method is performed only in a computer by synthesizing the intermediate sub-images between original sub-images obtained by transforming the captured elemental images. In the reconstruction process, we can obtain reconstructed 3D images with the better image quality within depth-of-focus than that reconstructed over the depth-of-focus. To demonstrate the feasibility of our method, optical and computational experiments are carried out and its results are presented.     

Broadly tunable UV-blue picosecond pulsed laser and its application for biological imaging

We have achieved a rapid and random wavelength tuned picosecond pulsed laser and a widely tunable UV-blue picosecond pulsed laser by using the intracavity second harmonic generation of the laser. The tuning range was from 384 to 434 nm with picosecond pulse oscillation. In addition, we demonstrated biological imaging using a fluorescent protein excited by the widely tunable UV-blue picosecond pulsed laser. We found that the laser is suitable for biological imaging using the fluorescent protein as an excitation light source without damages.     

Effects of in situ plasma treatment on optical and electrical properties of index-matched transparent conducting oxide layer

We investigated the effects of in situ plasma-treatment on optical and electrical properties of index-matched indium tin oxide (IMITO) thin film. To render the IMITO-coated surface hydrophilic and study the optical and electrical characteristics, we performed in situ oxygen plasma post-treatment without breaking vacuum. The 94.6% transmittance in the visible wavelength range (400-700 nm) increased on average to 96.4% and the maximum transmittance reached 98% over a broad wavelength range. The surface roughness and sheet resistance improved from 0.9 nm and 200 Ω/sq to 0.0905 nm and 100 Ω/sq, respectively, by in situ plasma post-treatment. We confirmed by contact angle measurement that the hydrophobic IMITO surface was altered to hydrophilic. The improved optical and electrical characteristics of in situ plasma-treated IMITO makes it adequate for high-resolution liquid crystal on silicon displays.     

Measurement of eye-penalty based on the clock amplitude of transmitted signal

We investigate the relationship between the eye-penalty and the clock amplitude of the transmission signal. The simulation results for return-to-zero (RZ) signals show a good correspondence between the clock amplitude and the eye-penalty. For a non-return-to-zero (NRZ) signal, however, the correspondence between them is satisfied within the reasonable range of the transmission distance. Thus, we can monitor the eye-penalty by measuring the clock amplitude of the transmission signal. The proposed scheme may provide a cost-effective monitoring of the chromatic dispersion-induced signal distortion in optical transmission systems and networks.