Intramolecular energy transferable (2,2‐diphenylvinyl)phenyl substituted poly(p‐phenylenevinylene) derivative with efficient photoluminescence and electroluminescence

A poly(p‐phenylenevinylene) (PPV) derivative containing a bulky (2,2‐diphenylvinyl)phenyl group in the side chain, EHDVP‐PPV, was synthesized by Gilch route. The reduced tolane‐bisbenzyl (TBB) defects, as well as the structure of the polymer, was confirmed by various spectroscopic methods. The intramolecular energy transfer from the (2,2‐diphenylvinyl)phenyl side group to the PPV backbone was studied by UV‐vis and photoluminescence (PL) of the obtained polymer and model compound. The polymer film showed maximum absorption and emission peaks at 454 and 546 nm, respectively, and high PL efficiency of 57%. A yellow electroluminescence (λ_max = 548 nm) was obtained with intensities of 6479 cd/m² when the light‐emitting diodes of ITO/PEDOT/EHDVP‐PPV/LiF/Al were fabricated. The maximum power efficiency of the devices was 0.729 lm/W with a turn‐on voltage of 3.6 V. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5636–5646, 2004     

BMAP/G/1 queue with correlated arrivals of customers and disasters

We consider a single server queue with disasters where the arrivals of customers and disasters are correlated. When a disaster occurs, it removes all the customers in the system and there requires repair time for the system to be operated normally. The stationary queue length distribution at the embedded points and at an arbitrary time are presented.     

A possibility of parallel and anti-parallel diffraction measurements on neutron diffractometer employing bent perfect crystal monochromator at the monochromatic focusing condition

In a conventional diffractometer having single monochromator, only one position, parallel position, is used for the diffraction experiment (i.e. detection) because the resolution property of the other one, anti-parallel position, is very poor. However, a bent perfect crystal (BPC) monochromator at monochromatic focusing condition can provide a quite flat and equal resolution property at both parallel and anti-parallel positions and thus one can have a chance to use both sides for the diffraction experiment. From the data of the FWHM and the Δd/d measured on three diffraction geometries (symmetric, asymmetric compression and asymmetric expansion), we can conclude that the simultaneous diffraction measurement in both parallel and anti-parallel positions can be achieved.     

Sol-gel preparation and optical properties of SiO2-Ta2O5 glass

Tantalum-doped silica glass was fabricated by the sol-gel process in order to obtain a glass with a high refractive index for optical use. A crack-free, clear glass rod was successfully prepared from a low-density gel and used as the core material for fabricating optical fibers. Transmission loss in the fabricated fibers was high, in the range of 10³-10⁴ dB/km, which may be caused by coloration due to the multivalency of tantalum; however, the loss was reduced by nearly one order of magnitude by heat treatment at 800 °C, that is, to 75 dB/km at a wavelength of 0.8 μm.     

双奇核188Au的准粒子带结构研究

利用在束γ谱学实验技术, 通过¹⁷³Yb(¹⁹F,4nγ)反应 布居了¹⁸⁸Au的高自旋态, 并对其准粒子带结构进行了研究. 基于实验测量结果, 对原有的双奇核¹⁸⁸Au能级纲图做了较大的修改. 通过系统性比较, 对15⁺以上的能级结构进行了讨论.     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Maximum likelihood estimate for discontinuous parameter in stochastic hyperbolic systems

The purpose of this paper is to study the identification problem of a spatially varying discontinuous parameter in stochastic hyperbolic equations. In previous works, the consistency property of the maximum likelihood estimate (MLE) was explored and the generating algorithm for MLE proposed under the condition that an unknown parameter is in a sufficiently regular space with respect to spatial variables.In order to show the consistency property of the MLE for a discontinuous coefficient, we use the method of sieves, i.e. the admissible class of unknown parameters is projected into a finite-dimensional space. For hyperbolic systems, we cannot obtain a regularity property of the solution with respect to a parameter. So in this paper, the parabolic regularization technique is used. The convergence of the derived finite-dimensional MLE to the infinite-dimensional MLE is justified under some conditions.     

Farthest-point queries with geometric and combinatorial constraints

In this paper we discuss farthest-point problems in which a set or sequence S of n points in the plane is given in advance and can be preprocessed to answer various queries efficiently. First, we give a data structure that can be used to compute the point farthest from a query line segment in O(log²n) time. Our data structure needs O(nlogn) space and preprocessing time. To the best of our knowledge no solution to this problem has been suggested yet. Second, we show how to use this data structure to obtain an output-sensitive query-based algorithm for polygonal path simplification. Both results are based on a series of data structures for fundamental farthest-point queries that can be reduced to each other.