Synthesis of Orthorhombic Mo‐V‐Sb Oxide Species by Assembly of Pentagonal Mo6O21 Polyoxometalate Building Blocks

Mix and match : The pentagonal [Mo₆O₂₁]^n? polyoxomolybdate building block assembles with other sources of Mo, V, and Sb ions to form an orthorhombic Mo‐V‐Sb oxide. The first single‐crystal X‐ray analysis of an orthorhombic Mo–V‐based oxide, a promising catalyst for light alkane selective oxidation known as the “M1 phase”, revealed the structure of the compound.

     

Development of scattering near-field optical microspectroscopy apparatus using an infrared synchrotron radiation source

We report the status of a scattering near-field microspectroscopy apparatus developed at SPring-8 using an infrared synchrotron radiation (IR-SR) source. It consists of a scattering type scanning near-field optical microscope and a Fourier transform infrared spectrometer. The IR-SR is used as a highly brilliant and broad-band IR source. This apparatus has potential for application in near-field spectroscopy with high spatial resolution beyond the diffraction limit. In order to eliminate background scatterings from the probe shaft and/or sample surface, we used higher harmonic demodulation method. The near-field spectra were observed by 2nd harmonic components using the lock-in detection. The spatial resolution of about 300 nm was achieved at around 1000 cm^? 1 (10 μm wavelength).     

Synthesis and fluorescence properties of novel pyrazine-boron complexes bearing a β-iminoketone ligand

A novel fluorescence dye based on pyrazine-boron complexes bearing a β-iminoketone ligand has been synthesized by using a simple two-step reaction. Synthesized complexes exhibited fluorescence in solution (F(max): 472-604 nm) and in the solid state (F(max): 496-624 nm). These complexes showed a larger Stokes shift (3690-4900 cm(-1)) than well-known boron dipyrromethene dyes (400-600 cm(-1), in most cases).     

Evaluation of a radioimmunoassay of alpha 1-microglobulin (alpha 1-m) with simplified procedures

A newly established double antibody radioimmunoassay (RIA) was fundamentally and clinically evaluated. Original procedures were partially modified as follows: Sample volume for serum and urine was changed to 25 microliters, and thus 200 mg/l of alpha 1-m standard was prepared using 50 microliters of original standard solution (100 mg/l). The results were satisfactory in sensitivity (0.3 mg/l obtained from -2SD method), intra-assay precision with its coefficient variation (CV) ranging from 3.0 to 7.4%, interassay precision with its CV ranging from 3.0 to 10.7%, and recovery with the mean value of 102.4% in serum and 108.2% in urine respectively. There were no changes about alpha 1-m value between diluted (2 times) and undiluted with high concentration samples. Normal levels of alpha 1-m were less than 25 mg/l in serum and less than 10 mg/l in urine. The present results indicate that the determination of alpha 1-m could be very simple and useful for the most sensitive screening test for the evaluation of renal function.     

Optimal Hylleraas wave functions

Hylleraas wave functions composed of the optimally combinedN terms (2 N 20) are presented for two-electron atoms with nuclear chargesZ = 1 (H^–), 2(He), 3(Li⁺), 5(B³⁺), and 10(Ne⁸⁺). The spherically-averaged electron density (r) and electron-pair densityh(r ₁₂) are constructed in a simple and analytical functional form from the 20-term functions. Comparison of several one- and two-electron moments r ^k and r ₁₂ ^k shows that the present density functions have near-exact accuracy.     

Proton transfer at helium temperatures during dioxygen activation by heme monooxygenases

In the first measurement of enzymatic proton transfer at liquid helium temperatures, we examine protonation of the peroxo-ferriheme state of heme oxygenase (HO) produced by in situ radiolytic cryoreduction of oxy-HO in H2O and D2O solvents at ca. 4 K and above, and compare these findings with analogous measurements for oxy-P450cam and for oxy-Mb. Proton transfer in HO occurs at helium temperatures in both solvents; it occurs in P450cam at approximately 50 K and higher; in Mb it does not occur until T > 170 K. For Mb, this transfer at 180 K is biphasic, and the majority phase shows a solvent kinetic isotope effect of 3.8. We discuss these results in the context of the picture of environmentally coupled tunneling, which links proton transfer to two classes of protein motions: environmental reorganization (lambda in Marcus-like equations) and protein fluctuations ("active dynamics"; gating) which modulate the distance of proton transfer.     

A method for preconcentrating Zr from large volumes of seawater using MnO(2)-impregnated fibers

A method for preconcentrating Zr from large volumes of seawater using MnO(2)-impregnated fibers is described. The manganese dioxide-impregnated fibers were synthesized from polypropylene cartridge filters by a redox reaction between KMnO(4) and MnCl(2). Seawater samples were introduced into an extraction system and Zr was extracted from the samples by the MnO(2)-impregnated fibers. Zirconium was recovered from the fibers through two steps of elution into aqueous solutions and measured by inductively coupled argon plasma atomic emission spectrometry. The average extraction efficiency for Zr was 59% on a single pass of 50-1000 l sample at flow rates of 8.1-15 l min(-1), and 100% on continuous circulation of 200 l sample at 15 l min(-1). The results indicate that Zr can be rapidly and easily preconcentrated onto MnO(2)-impregnated fibers from large volumes of seawater. This simple method can be applied to the preconcentration of trace dissolved Zr in natural water and removal of radiozirconium from radioactive waste fluid.     

Living polymerization of ethylene catalyzed by titanium complexes having fluorine-containing phenoxy-imine chelate ligands

Seven titanium complexes bearing fluorine-containing phenoxy-imine chelate ligands, TiCl(2)[eta(2)-1-[C(H)=NR]-2-O-3-(t)Bu-C(6)H(3)](2) [R = 2,3,4,5,6-pentafluorophenyl (1), R = 2,4,6-trifluorophenyl (2), R = 2,6-difluorophenyl (3), R = 2-fluorophenyl (4), R = 3,4,5-trifluorophenyl (5), R = 3,5-difluorophenyl (6), R = 4-fluorophenyl (7)], were synthesized from the lithium salt of the requisite ligand and TiCl(4) in good yields (22%-76%). X-ray analysis revealed that the complexes 1 and 3 adopt a distorted octahedral structure in which the two phenoxy oxygens are situated in the trans-position while the two imine nitrogens and the two chlorine atoms are located cis to one another, the same spatial disposition as that for the corresponding nonfluorinated complex. Although the Ti-O, Ti-N, and Ti-Cl bond distances for complexes 1 and 3 are very similar to those for the nonfluorinated complex, the bond angles between the ligands (e.g., O-Ti-O, N-Ti-N, and Cl-Ti-Cl) and the Ti-N-C-C torsion angles involving the phenyl on the imine nitrogen are different from those for the nonfluorinated complex, as a result of the introduction of fluorine atoms. Complex 1/methylalumoxane (MAO) catalyst system promoted living ethylene polymerization to produce high molecular weight polyethylenes (M(n) > 400 000) with extremely narrow polydispersities (M(w)/M(n) < 1.20). Very high activities (TOF > 20 000 min(-1) atm(-1)) were observed that are comparable to those of Cp(2)ZrCl(2)/MAO at high polymerization temperatures (25, 50 degrees C). Complexes 2-4, which have a fluorine atom adjacent to the imine nitrogen, behaved as living ethylene polymerization catalysts at 50 degrees C, whereas complexes 5-7, possessing no fluorine adjacent to the imine nitrogen, produced polyethylenes having M(w)/M(n) values of ca. 2 with beta-hydrogen transfer as the main termination pathway. These results together with DFT calculations suggested that the presence of a fluorine atom adjacent to the imine nitrogen is a requirement for the high-temperature living polymerization, and the fluorine of the active species for ethylene polymerization interacts with a beta-hydrogen of a polymer chain, resulting in the prevention of beta-hydrogen transfer. This catalyst system was used for the synthesis of a number of unique block copolymers such as polyethylene-b-poly(ethylene-co-propylene) diblock copolymer and polyethylene-b-poly(ethylene-co-propylene)-b-syndiotactic polypropylene triblock copolymer from ethylene and propylene.     

Design of NIR-absorbing simple asymmetric squaraine dyes carrying indoline moieties for use in dye-sensitized solar cells with Pt-free electrodes

Novel near-infrared (NIR)-sensitizing (up to 800 nm) simple asymmetric squaraine dyes (Sq 31 and Sq 33) carrying indoline moieties that did not require the introduction of any linker groups were developed. DSSCs fabricated with Sq 33 exhibited remarkable characteristics in the long-wavelength visible and NIR region (up to 800 nm), such as a conversion efficiency of 3.75% (AM 1.5G) with an incident photon-to-current conversion efficiency of 63% (650 nm), a short-circuit photocurrent density of 13.64 mA, an open-circuit photovoltage of 0.48, and a fill factor of 0.57.     

Kinetics of UV light-induced cyclobutane pyrimidine dimers in human skin in vivo: an immunohistochemical analysis of both epidermis and dermis

It is well known that UV exposure of human skin induces DNA damage, and the cumulative effect of such repeated damage is an important contributor to the development of skin cancer. Here, we demonstrate UV dose- and time-dependent induction of DNA damage in the form of cyclobutane pyrimidine dimers (CPD) in skin cells following a single exposure of human skin to UV radiation. CPD+ cells were identified by an immunohistochemical technique using monoclonal antibodies to thymine dimers. The percentage of CPD+ cells was UV dose-dependent, even a suberythemal (0.5 minimal erythemal dose [MED]) dose resulted in detectable level of cells that contained pyrimidine dimers. Forty-eight hours after irradiation the percent of total epidermal cells positive for CPD ranged from 19 +/- 8, 36 +/- 10, 57 +/- 12 and 80 +/- 10, and total percent dermal cells positive for CPD ranged from 1 +/- 1, 7 +/- 3, 16 +/- 3 and 20 +/- 5, respectively, following 0.5, 1.0, 2.0 and 4.0 MED. CPD were also observed in deeper reticular dermis, which suggest the penetrating ability of UV radiation into the skin. The change in CPD+ cells from 0.5 to 240 h post-UV exposure in both epidermal and dermal compartments of the skin was also quantitated. CPD+ cells were observed in skin biopsies at early time points after UV exposure which remained elevated for 48 h, then declined significantly by 3 days post-UV. A close examination of the skin at and after 3 days following UV exposure indicates the significant removal of DNA damaged cells from the epidermis. Ten days after UV exposure the levels of CPD+ cells in both epidermis and dermis were not significantly different from that in unirradiated skin.