脲衍生物对环氧树脂/双氰双胺固化体系潜伏性促进作用研究

本文用DSC、TBA、旋转粘度计等手段对一系列不同结构及不同取代基取代的脲衍生物对环氧树脂/双氰双胺固化体系的潜伏性促进作用作了考察。结果表明,其促进效果随脲的α位取代烷基碳原子数增加而减弱,而其β、γ位上的取代基团变换时对促进作用无明显影响。由此得出4,4-二(N,N-二甲基)脲二苯甲烷(简称M-二甲)和2,4-二(N,N-二甲基)脲甲苯(简称T-二甲)二种脲衍生物在本丈所考察的28种化合物中具有最显著的促进效果,其中T-二甲的促进活性略高于M-二甲,它们均可使上述固化体系的固化温度降至130℃左右,含有此促进剂的固化体系即使在30℃下贮存,其粘度保持基本不变的时间仍可达三个月以上。     

异戊二烯稀土催化聚合过程中配合物结构及其转化的~(13)C-NMR研究

本文用~(13)C-NMR研究了异戊二烯(IP)在均相催化剂(CF_3CO_2)_2LnCl·EtOH—(i-Bu)AlH—o-C_6D_4Cl_2作用下的聚合过程。单体首先被活化同稀土配位生成η~4-IP稀土配合物(反式和顺式),然后η~4-IP的C-3和C-4插入Ln-H键生成η~3-烯丙基稀土配合物——η~3-(2-甲基)丁烯基稀土配合物(同式和对式)。二维~(13)C-NMR交换谱表明η~4-IP和0η~3-烯丙基的每对异构体在常温下分别进行慢交换反应(互变异构),这一过程使插入反应在常温下得以进行。     

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

改进的微波辅助无溶剂法提取薄荷和陈皮中的挥发油组分

An improved solvent free microwave extraction, in which a kind of microwave absorption medium （carbonyl iron powder） was used, was applied to the extraction of essential oil from dried menthol mint and orange peel without addition of any solvent and pretreatment. It took much less time of extraction （30 min） than microwave-assisted hydrodistillation （90 min） and conventional hydrodistillation （180 min）. The kinds of chemical compositions in essential oil extracted by different methods were almost the same and such improved solvent free microwave extraction can be a feasible way in extraction of essential oil from dried plant materials.     

SYNTHESIS AND POLYMERIZATION OF ALIPHATIC TERTIARY AMINO-GROUP N-SUBSTITUTED ACRYLAMIDES

Aliphatic tertiary amino-group N-substituted acrylamides, N-acryl-N′-methylpiperazine (AMP)and N-methacryl-N′-methylpiperazine (MAMP) were synthesized directly from N-methylpiperazinewith corresponding acryloyl chlorides and characterized by elementary analysis of their picrates,~1H-NMR, IR and MS. AMP did not polymerize with benzoyl peroxide (BPO), but could poly-merize with lauroyl peroxide (LPO). The rate equation of the polymerization was given as R_P=K_P [AMP]~(1.5)[LPO]~(0.5) and the overall activation energy of this polymerization system was 10.8Kcal/mol. The redox nature of LPO with the monomer itself was suggested. Even though AMP and MAMP hardly proceed the polymerization initiated with BPO, butunder lower concentration would form redox system with BPO to initiate the polymerization of MMAreadily. The rate equation of the polymerization of MMA initiated with MAMP-BPO systemwas given as R_P=K_P [MMA] [MAMP}~(0.5) [BPO]~(0.5) and the overall activation energy was 10.2Kcal/mol. The analysis of the obtained polymers confirmed that MAMP not only initiated the poly-merization of MMA by combining with BPO, but also took part in the polymer chains impartingthem with better biocompatibility.     

环氧化橡胶及其合金的研究与应用

综述了国内外环氧化橡胶及其合金的研究现状和应用趋势,重点介绍了环氧化天然橡胶、环氧化聚丁二烯、环氧化苯乙烯-丁二烯-苯乙烯三嵌段共聚物及其合金的优点,以及影响其物理机械性能的因素和环氧化橡胶的发展方向。     

Supramolecular Assemblies of (±-2,2''''-Dihydroxy-1,1''''-binaphthyl with 2,2''''-Bipyridine and Naphthodiazine

Introduction Optically active 1,1'-bi-2-naphthol (BINOL) and its derivatives have been widely used as chiral ligands of catalysts for asymmetric reactions and effective host compounds for the isolation or optical resolution of a wide range of organic guest molecules through the for-mation of crystalline inclusion complexes.1,2 The wide-ranging and important applications of these com-pounds in organic synthesis have stimulated great inter-est in developing efficient methods for their prepara-…     

含酯基和酰胺基支链的苯并菲液晶电荷传输性质的量子化学研究

根据Marcus半经典模型,计算了支链中含酰胺基和含酯基的苯并菲盘状液晶化合物C18H6(OC2H5)3(OCH2CONHCH3)3和C18H6(OC2H5)3(OCH2COOCH3)3的电荷转移反应的速率常数。这两种化合物的支链都可以对称性分布,也可以非对称性分布。计算表明,支链排列的对称性对电荷转移矩阵元和电荷传输速率常数的影响很大,非对称性分子的正电荷传输速率常数和负电荷传输速率常数均大于对称性分子。所以,取代基非对称性排列对增加电荷传输速率常数有利。其原因是支链非对称排列的分子的质量中心与几何中心不重合,当液晶分子绕质量中心旋转的同时形成了分子间的相对平移,从而增大了电荷转移矩阵元。本文为设计、改善液晶分子的电荷传输性能提供了一条新的思路。     

2-对联苯-8-羟基喹啉锌的合成及其应用于新型白光OLED

合成了一种全新的有机发光材料2-对联苯-8-羟基喹啉锌(Zn[2-(p-biPh)-8-Q-O]₂), 通过¹H NMR, UV-Vis等对配合物的结构进行表征. 利用该材料制备了新型白光有机电致发光器件(OLED), 其结构为: ITO/NPB (N,N'-双(1-萘基)-N,N'-二苯基-1,1'-二苯基-4,4'-二胺)/BCP (2,9-二甲基-4,7-二苯基-1,10-菲咯啉)/Zn[2-(p-biPh)-8-Q-O]₂/Al. 通过调节空穴阻挡层BCP的厚度, 实现了NPB(蓝光发射)和Zn[2-(p-biPh)-8-Q-O]₂(黄光发射)作为器件双发光层的有效复合, 并研究了其发光机理. 当BCP层的厚度为2.0 nm时, 获得了稳定的白色发光; 该器件在6 V电压下启亮, 20 V电压时最大发光亮度达到130 cd/m², 电流效率为0.224 cd/A.