Tirucallane Triterpenoid Saponins from Munronia delavayi Franch

Four new tirucallane triterpenoid saponins, named munronosides I–IV ( 2 – 5 ), along with three known triterpenoids, sapelin B ( 1 ), melianodiol, and (3β)‐22,23‐epoxytirucall‐7‐ene‐3,24,25‐triol, were isolated from the EtOH extract of the whole plants of Munronia delavayi Franch by chromatographic methods. On the basis of spectroscopic evidences, the structures of 2 – 5 were elucidated as (20S,23R,24S)‐21,25‐epoxy‐29‐{{O‐β‐d‐ glucopyranosyl‐(1→3)‐O‐[α‐l‐ rhamnopyranosyl‐(1→6)]‐β‐d‐ glucopyranosyl}oxy}‐23,24‐dihydroxytirucall‐7‐ene‐3,21‐dione ( 2 ), (3β,20S,23R,24S)‐21,25‐epoxy‐29‐{{O‐β‐d‐ glucopyranosyl‐(1→3)‐O‐[α‐l‐ rhamnopyranosyl‐(1→6)]‐β‐d‐ glucopyranosyl}oxy}‐3,23,24‐trihydroxytirucall‐7‐en‐21‐one ( 3 ), (20S,23R,24S)‐24‐(acetyloxy)‐21,25‐epoxy‐29‐{{O‐β‐d‐ glucopyranosyl‐(1→3)‐O‐[α‐l‐ rhamnopyranosyl‐(1→6)]‐β‐d‐ glucopyranosyl}oxy}‐23‐hydroxytirucall‐7‐ene‐3,21‐dione ( 4 ), and (3β,20S,23R,24S)‐24‐(acetyloxy)‐21,25‐epoxy‐29‐{{O‐β‐d‐ glucopyranosyl‐(1→3)‐O‐[α‐l‐ rhamnopyranosyl‐(1→6)]‐β‐d‐ glucopyranosyl}oxy}‐3,23‐dihydroxytirucall‐7‐en‐21‐one ( 5 ).     

A polymer-based microfluidic device for immunosensing biochips

This paper describes the design, fabrication, and test of a PDMS/PMMA-laminated microfluidic device for an immunosensing biochip. A poly(dimethyl siloxane)(PDMS) top substrate molded by polymer casting and a poly(methyl methacrylate)(PMMA) bottom substrate fabricated by hot embossing are bonded with pressure and hermetically sealed. Two inlet ports and an air vent are opened through the PDMS top substrate, while gold electrodes for electrochemical biosensing are patterned onto the PMMA bottom substrate. The analyte sample is loaded from the sample inlet port to the detection chamber by capillary force, without any external intervening forces. For this and to control the time duration of sample fluid in each compartment of the device, including the inlet port, diffusion barrier, reaction chamber, flow-delay neck, and detection chamber, the fluid conduit has been designed with various geometries of channel width, depth, and shape. Especially, the fluid path has been designed so that the sample flow naturally stops after filling the detection chamber to allow sufficient time for biochemical reaction and subsequent washing steps. As model immunosensing tests for the microfluidic device, functionalizations of ferritin and biotin to the sensing surfaces on gold electrodes and their biospecific interactions with antiferritin antiserum and streptavidin have been investigated. An electrochemical detection method for immunosensing by biocatalyzed precipitation has been developed and applied for signal registration. With the biochip, the whole immunosensing processes could be completed within 30 min.     

Synthesis of end‐functionalized poly(methyl methacrylate) by ruthenium‐catalyzed living radical polymerization with functionalized initiators

A series of functionalized 2‐bromoisobutyrates and 2‐chloro‐2‐phenylacetates led to α‐end‐functionalized poly(methyl methacrylate)s in Ru(II)‐catalyzed living radical polymerization; the terminal functions included amine, hydroxyl, and amide. These initiators were effective in the presence of additives such as Al(Oi‐Pr)₃ and n‐Bu₃N. The chlorophenylacetate initiators especially coupled with the amine additive gave polymers with well‐controlled molecular weights (M_w/M_n = 1.2–1.3) and high end functionality (F_n ～ 1.0). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1937–1944, 2002     

1‐[(5‐tert‐Butyl‐2‐hydroxy­phen­yl)­imino­meth­yl]‐2‐napthol

In the crystal structure of the title compound, C₂₁H₂₁NO₂, strong N—H⋯O and O—H⋯O hydrogen bonds exist. The keto–amine form is favoured over the enol–imine form in the tautomerism. Six‐membered chelate rings formed by intra­molecular hydrogen bonds increase the stability of the whole mol­ecule. Inter­molecular hydrogen bonds link adjacent units together, forming an infinite one‐dimensional chain parallel to the a axis.     

A dimer of α‐ and β‐dihydro­arte­misinin: bis­(3,6,9‐trimethyl‐3,12‐epidioxy‐3,4,5,5a,6,7,8,8a,9,10‐deca­hydro‐12H‐pyrano[4,3‐j][1,2]­benzo­dioxepin‐10‐yl) ether

The title compound, C₃₀H₄₆O₉, prepared from a mixture of α‐ and β‐dihydro­artemisinin, has α‐ and β‐arteether moieties linked via an –O– bridge, so that the mol­ecule is asymmetric about the bridge. The endoperoxide bridges of the parent compounds have been retained in each half of the ether‐bridged dimer. The rings exhibit chair and twist–boat conformations.     

The Synthesis of Some New N‐[1‐(2,5‐Dichlorophenyl)‐5‐Methyl‐1,2,3‐Triazol‐4‐yl]‐Carbamic Acid Ester Derivatives

The synthesis of some new N‐[1‐(2,5‐dichlorophenyl)‐5‐methyl‐1,2,3‐triazol‐4‐yl]‐carbamic acid ester derivatives are reported in this paper. The yielded products 6a‐l were confirmed by Elemental analyses, NMR, MS, and IR spectra.     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Kopsifolines A–F: a New Structural Class of Monoterpenoid Indole Alkaloids from Kopsia

Six new indole alkaloids, named kopsifolines A–F ( 1 – 6 ), with an unprecedented hexacyclic carbon skeleton, constituting a new structural group of monoterpenoid indole alkaloids, were obtained from the leaf extract of a Malayan Kopsia species, and their structures were established by spectroscopic analysis.     

First principles study of the structure,electronic state,and stability of CmN2 clusters

Geometric and electronic properties of C_mN₂ (m = 1–14) clusters have been investigated by density functional theory using the hybrid B3LYP functional and the 6‐311G(d) basis set. Harmonic frequencies for these clusters are given to aid in the characterization of the ground states. These results show that C_mN₂ (m = 1–14) clusters form linear structures with D_∞h symmetry. Two N atoms favor to bond at ends in linear isomers. The chains with odd m have triplet ground states whereas the ones with even m have singlet ground states. The calculated HOMO–LUMO gaps and ionization potentials all show that the C_mN₂ (m = 1–14) clusters with even m are more stable than those with odd m, which is consistent with the observed even–odd alternation of the time‐of‐flight signal intensities. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Electronic structure and molecular orbital study of the first excited state of the high‐efficiency blue OLED material bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex from ab initio and TD‐B3LYP

Bis(2‐methyl‐8‐quinolinolato)aluminum(III) hydroxide complex (AlMq₂OH) is used in organic light‐emitting diodes (OLEDs) as an electron transport material and emitting layer. By means of ab initio Hartree–Fock (HF) and density functional theory (DFT) B3LYP methods, the structure of AlMq₂OH was optimized. The frontier molecular orbital characteristics and energy levels of AlMq₂OH have been analyzed systematically to study the electronic transition mechanism in AlMq₂OH. For comparison and calibration, bis(8‐quinolinolato)aluminum(III) hydroxide complex (Alq₂OH) has also been examined with these methods using the same basis sets. The lowest singlet excited state (S₁) of AlMq₂OH has been studied by the singles configuration interaction (CIS) method and time‐dependent DFT (TD‐DFT) using a hybrid functional, B3‐LYP, and the 6‐31G* basis set. The lowest singlet electronic transition (S₀ → S₁) of AlMq₂OH is π → π* electronic transitions and primarily localized on the different quinolate ligands. The emission of AlMq₂OH is due to the electron transitions from a phenoxide donor to a pyridyl acceptor from another quinolate ligand including C → C and O → N transference. Two possible electron transfer pathways are presented, one by carbon, oxygen, and nitrogen atoms and the other via metal cation Al³⁺. The comparison between the CIS‐optimized excited‐state structure with the HF ground‐state structure indicates that the geometric shift is mainly confined to the one quinolate and these changes can be easily understood in terms of the nodal patterns of the highest occupied and lowest unoccupied molecular orbitals. On the basis of the CIS‐optimized structure of the excited state, TD‐B3‐LYP calculations predict an emission wavelength of 499.78 nm. An absorption wavelength at 380.79 nm on the optimized structure of B3LYP/6‐31G* was predicted. They are comparable to AlMq2OH 485 and 390 nm observed experimentally for photoluminescence and UV‐vis absorption spectra of AlMq₂OH solid thin film on quartz, respectively. Lending theoretical corroboration to recent experimental observations and supposition, the reasons for the blue‐shift of AlMq2OH were revealed. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2004