KT-5C托卡马克上不同限制器偏压下等离子体p约束改善的实验研究

在KT-5C托卡马克上,采用多块组合的可偏压限制器控制等离子体边缘电场.进行了改善等离子体的边缘参数及其机制的研究.实验显示,限制器的正、负偏压都能改变等离子体电位,但正偏压更有效,能有效地建立边缘电场,进而抑制边缘扰动改善等离子体约束.利用可移动静电探针,测得正偏压期间边缘电子温度T_e(r)、电子密度n_e(r)、空间电位V_p(r)分布变陡,与计算得到的边缘粒子通量Г(a_(?))减少,整体粒子约束时间τ_p增加结果是一致的.     

Synthesizing 0.9PZN–0.1BT by mechanically activating mixed oxides

0.9Pb(Zn_1/3Nb_2/3)–0.1BaTiO₃ (0.9PZN–0.1BT) of perovskite structure has been successfully prepared by mechanically activating mixed oxides of PbO, ZnO, Nb₂O₅, BaO and TiO₂. The novel mechanochemical technique skips the phase-forming calcination step at an intermediate temperature that is always required in both the conventional solid state reaction and chemistry-based precursor routes. Ultrafine 0.9PZN–0.1BT particles of perovskite structure were formed when the constituent oxides were mechanically activated for more than 10 h. The powder was sintered to a density of 96% theoretical density at 1100°C for 1 h. The sintered 0.9PZN–0.1BT exhibits perovskite structure and a peak dielectric constant of 8800 at the Curie temperature of 60°C when measured at a frequency of 100 Hz.     

适用于循环平稳声场的基于波叠加法的近场声全息技术

在原有的平面循环平稳近场声全息基础上,提出一种基于波叠加法的循环平稳近场声全息技术,可以对具有复杂表面的声源进行全息重建,重建的声源表面声压谱相关密度函数能反映出调制信号的信息.声源表面声压谱相关密度函数全息图形象地反映了调制信号在表面的强弱分布情况,可由此确定调制信号源的产生位置.仿真分析和实验验证表明,基于波叠加法的循环平稳近场声全息技术可以更准确地反映循环平稳声场的调制特性.该方法继承了波叠加法的优点,无需计算边界奇异积分,计算效率高、精度好. 关键词： 近场声全息 循环平稳信号 波叠加     

Charge/discharge characteristics of sulfur composite electrode at different temperature and current density in rechargeable lithium batteries

The charge/discharge characteristics of the sulfur composite cathodes were investigated at different temperatures and different current densities. The composite presented the discharge capacities of 854 and 632 mAh g⁻¹ at 60 and −20 °C, respectively, while it had the discharge capacities of 792 mAh g⁻¹ at 25 °C. The composite presented the discharge capacities of 792 and 604 mAh g⁻¹ at 55.6 and 667 mA g⁻¹, respectively, at room temperature. The results showed that the sulfur composite cathodes presented good charge/discharge characteristics between 60 and −20 °C and at a high c-rate up to 667 mA g⁻¹.     

A Novel UWB Antenna with Small Side-Leakage

A successful design for a UWB (ultra-wideband antennas) antenna based on NRD-guide (nonradiative dielectric waveguide) with small side-leakage is presented. The rule of the theoretical selection of its parameters, if NRD-guide is used as the UWB antennas, is studied firstly, then the temporal propagation characteristics of the NRD-guide and the radiation characteristics for an tapered open-ended NRD-guide are calculated by FDTD (finite-difference time-domain) method.     

Tomographic analysis of the central magnetohydrodynamic oscillations on the HT-7 tokamak

Multi-channel soft x-ray (SX) detectors are applied to generate images of magnetohydrodynamic (MHD) oscillation on the HT-7 tokamak, and the data from SX cameras are analysed by using the Fourier--Bessel harmonic reconstruction method and the singular value decomposition. The image reconstruction of SX emissivity is obtained on the assumption of plasma rigid rotation. One of the important phenomena in the HT-7 discharge is the transition from the sawtooth oscillations to the MHD oscillations when the plasma density grows higher. The MHD structure observed in the SX tomography is featured as follows: the magnetic surface of MHD structure is made up of the crescent-shaped ``hot core' and the circular ``cold bubble'. The structure of the magnetic surface is relatively stable. It rotates in the direction of the electron diamagnetic drift at a frequency being the oscillation frequency of the MHD oscillations.     

Photocatalysts of Cr Doped TiO2 Film Prepared by Micro Arc Oxidation

通过微弧氧化法在Na3PO4+K2Cr2O7电解液中制备了系列铬掺杂二氧化钛薄膜. X射线和扫描电镜显示薄膜的主要晶相为锐钛矿型二氧化钛,且表面为多孔结构. 在可见光照射下,薄膜对降解亚甲基蓝和分解水有着较好的光催化性能,这主要是由铬的掺杂引起的.由于铬的掺杂,一方面在二氧化钛中形成了Cr3+/Cr4+离子对,另一方面在带隙中形成了氧的空位能级. 前者降低了电子-空穴的复合几率,而后者在二氧化钛的禁带中形成了新的能级. 新能级的形成使得由二氧化钛价带跃迁至氧空位能级所需的光子能量减少. 另外探讨了微弧氧化形成掺杂二氧化钛薄膜的机制.     

CO2 laser beam modulating for surface texturing machining

Laser texturing is a novel technique that may be used to texture a cold roller in the process of manufacturing high quality steel sheets. With the aim of improving the quality of the textured roller by using a CO₂ laser, a new laser beam modulating device is proposed. An optical beam expander with a fast rotating chopper system is designed. The laser pulse is split into two parts by the chopper blades; one is the preheating pulse that is reflected onto optical loop mirrors; the other is the directly transmitted pulse that creates the craters at the preheated spots. The preheating beam focus spot size and position can be adjusted. The focusing characteristics and optical parameter compensation for the flying optics are investigated. The heat transfer and melt process of laser texturing are numerically simulated. The effects of the double pulses on the texturing are analyzed. The effect of preheating the sample ahead of the laser texturing pulse is examined. The surface profile and bump hardness show improvements by using this approach.     

Synthesis and photophysical properties of europium pentafluorinated β-diketonate complexes

Research on Chemical Intermediates - Two pentafluorinated β-diketone ligands, 4,4,5,5,5-pentafluoro-1-(4-methoxyphenyl)pentane-1,3-dione (PFMP) and 4,4,5,5,5-pentafluoro-1-(4-dimethyl...     

Rapid Interception of CnF2n+1(O)SO. Radical with Copper-Based Carbene: A Novel Access to Perfluoroalkanesulfinate Ester

In this communication, an unprecedented interception of C_nF_2n+1(O)SO^. radical with a copper-based carbene has been established. Distinguished by wide substrate scopes and mild reaction conditions, this novel radical–carbene coupling reaction (RCC reaction) provides a fundamentally different and mechanistically interesting strategy for the synthesis of perfluoroalkanesulfinate esters.