Performance of Portfolios Based on the Expected Utility-Entropy Fund Rating Approach

Yang and Qiu proposed and reframed an expected utility–entropy (EU-E) based decision model. Later on, a similar numerical representation for a risky choice was axiomatically developed by Luce et al. under the condition of segregation. Recently, we established a fund rating approach based on the EU-E decision model and Morningstar ratings. In this paper, we apply the approach to US mutual funds and construct portfolios using the best rating funds. Furthermore, we evaluate the performance of the fund ratings based on the EU-E decision model against Morningstar ratings by examining the performance of the three models in portfolio selection. The conclusions show that portfolios constructed using the ratings based on the EU-E models with moderate tradeoff coefficients perform better than those constructed using Morningstar. The conclusion is robust to different rebalancing intervals.     

Intelligent Fault Identification for Rolling Bearings Fusing Average Refined Composite Multiscale Dispersion Entropy-Assisted Feature Extraction and SVM with Multi-Strategy Enhanced Swarm Optimization

Rolling bearings act as key parts in many items of mechanical equipment and any abnormality will affect the normal operation of the entire apparatus. To diagnose the faults of rolling bearings effectively, a novel fault identification method is proposed by merging variational mode decomposition (VMD), average refined composite multiscale dispersion entropy (ARCMDE) and support vector machine (SVM) optimized by multistrategy enhanced swarm optimization in this paper. Firstly, the vibration signals are decomposed into different series of intrinsic mode functions (IMFs) based on VMD with the center frequency observation method. Subsequently, the proposed ARCMDE, fusing the superiorities of DE and average refined composite multiscale procedure, is employed to enhance the ability of the multiscale fault-feature extraction from the IMFs. Afterwards, grey wolf optimization (GWO), enhanced by multistrategy including levy flight, cosine factor and polynomial mutation strategies (LCPGWO), is proposed to optimize the penalty factor C and kernel parameter g of SVM. Then, the optimized SVM model is trained to identify the fault type of samples based on features extracted by ARCMDE. Finally, the application experiment and contrastive analysis verify the effectiveness of the proposed VMD-ARCMDE-LCPGWO-SVM method.     

Assessing Earthquake Forecast Performance Based on b Value in Yunnan Province,China

Many studies have shown that b values tend to decrease prior to large earthquakes. To evaluate the forecast information in b value variations, we conduct a systematic assessment in Yunnan Province, China, where the seismicity is intense and moderate–large earthquakes occur frequently. The catalog in the past two decades is divided into four time periods (January 2000–December 2004, January 2005–December 2009, January 2010–December 2014, and January 2015–December 2019). The spatial b values are calculated for each 5-year span and then are used to forecast moderate-large earthquakes (M ≥ 5.0) in the subsequent period. As the fault systems in Yunnan Province are complex, to avoid possible biases in b value computation caused by different faulting regimes when using the grid search, the hierarchical space–time point-process models (HIST-PPM) proposed by Ogata are utilized to estimate spatial b values in this study. The forecast performance is tested by Molchan error diagram (MED) and the efficiency is quantified by probability gain (PG) and probability difference (PD). It is found that moderate–large earthquakes are more likely to occur in low b regions. The MED analysis shows that there is considerable precursory information in spatial b values and the forecast efficiency increases with magnitude in the Yunnan Province. These results suggest that the b value might be useful in middle- and long-term earthquake forecasts in the study area.     

电气线路互联系统线缆抗高空核电磁脉冲耦合效应

高空核电磁脉冲（HEMP）对电子设备的耦合途径主要有两方面：一方面是通过装备（产品）上的天线耦合通道进入到电子系统内的“前门耦合”方式;另一方面则是“后门耦合”,即通过装备（产品）上的壳体、电源线、电缆、机箱的缝隙、孔洞等途径进行耦合。主要研究电气线路互联系统(EWIS)线缆抗高空核电磁脉冲耦合效应,通过研究HEMP干扰的特征、能量分布,搭建HEMP数学模型,采用控制变量法,改变EWIS线缆类型、离地高度等要素,通过在CST上建立仿真模型以及开展试验,分析HEMP对电子设备造成的影响程度,得到HEMP耦合效应的一般性结论与规律。     

Chiral phase transition and equation of state in chiral imbalance

The chiral phase transition and equation of state are studied within a novel self-consistent mean-field approximation of the two-flavor Nambu-Jona-Lasinio model. In this newly developed model, modifications to the chemical μ and chiral chemical \begin{document}$\mu_5$\end{document} potentials are naturally included by introducing vector and axial-vector channels from Fierz-transformed Lagrangian to the standard Lagrangian. In the proper-time scheme, the chiral phase transition is a crossover in the \begin{document}$T-\mu$\end{document} plane. However, when \begin{document}$\mu_5$\end{document} is incorporated, our study demonstrates that a first order phase transition may emerge. Furthermore, the chiral imbalance will soften the equation of state of quark matter. The mass-radius relationship and tidal deformability of quark stars are calculated. The maximum mass and radius decrease as \begin{document}$\mu_5$\end{document} increases. Our study also indicates that the vector and axial-vector channels exhibit an opposite influence on the equation of state.     

信息化课堂教学设计--以“刚体定轴转动的角动量及角动量守恒定律”为例

遵循“学生主体、教师主导”的教育教学理念,借助信息化教学工具,合理有效地设计好每一个教学环节.采用演示、体验、探究、问题导向和分组讨论等教学手段和方法,让学生在课堂中自主发现问题、分析问题并解决问题,实现“学生做中学、教师做中教”,大大提升教学效果.     

EcoLens: visual analysis of ecological regions in urban contexts using traffic data

Journal of Visualization - The increasing availability of spatiotemporal data provides unprecedented opportunities for understanding the structure of an urban area in terms of people’s...     

混沌直接序列扩频信号盲解调的硬件电路实现

提出了基于现场可编程门阵列 (FPGA) 技术的混沌直接序列扩频信号盲解调的硬件电路实现方法. 设计了混沌直接序列扩频信号发射机与接收机. 发射机可产生10种不同的混沌直接序列扩频信号. 为方便接收机的硬件电路实现, 对无先导卡尔曼滤波混沌拟合盲解调算法进行了简化, 在简化模型的基础上设计了接收机硬件结构. 提出了一种动态调整偏移因子的新方法, 使接收机能实时适应混沌映射的变化. 通过高斯白噪声信道及多径信道条件下的盲解调实验, 验证了盲解调算法硬件实现的抗噪声与抗多径性能, 以及对10种不同的混沌直接序列扩频信号的自适应破译效果. 关键词： FPGA 混沌直接序列扩频通信 盲解调     

CaTiO3基微波介质陶瓷的频率温度稳定性

通过对克劳修斯-莫索蒂方程的近似, 分析了钙钛矿结构微波介质陶瓷频率温度系数 (τ_f) 的主要影响因素, 发现改变材料介电响应中离子位移极化和电子位移极化的比例, 可调节频率温度系数的正负与大小. 通过电子结构计算和容忍因子分析, 预测引入(Zn_1/3Nb_2/3)⁴⁺对具有正温度系数 的CaTiO₃进行B位取代将提高材料电子极化响应比例, 调节τ_f由正变负. 采用偏铌酸盐为前驱体, 通过固相反应法合成了Ca[(Zn_1/3Nb_2/3)_xTi_(1-x)]O₃钙钛矿结构陶瓷, 并对其进行结构分析和性能测试, 实验结果与理论分析一致, 获得了具有近零频率温度系数的Ca[(Zn_1/3Nb_2/3)_0.7Ti_0.3]O₃介质陶瓷材料. 关键词： B位复合钙钛矿陶瓷 谐振频率温度稳定性 极化机理 6八面体倾斜')" href="#">BO₆八面体倾斜