The Coordination Chemistry of f-Block Elements in Molten Salts

The coordination chemistry of f-block elements (lanthanide and actinide) in molten salts has become a resounding topic in view of its great importance to the research and development (R&D) of molten salt reactors and pyroprocessing. In this Review article, a general overview of the coordination chemistry of f-block elements in molten salts is provided including past achievements and recent advances. Particular emphases are placed on the oxidation state, speciation, and solution structure of f-block metal ions in molten salts, as well as their relationships with the salt composition. Furthermore, this review briefly discusses the spectroscopic and theoretical methods that complement each other in revealing the coordination properties.     

Amino-Acid-Induced Circular Polarized Luminescence in One-Dimensional Manganese(II) Halide Hybrid

Circular polarized luminescence (CPL)-active materials attract great attentions owing to their widely applications in 3D optical displays and encrypted transmission. Inspired by the strategies adopted in perovskite based CPL materials, herein, CPL-active hybrids (D)- and (L)-(tert-butyl prolinate)MnCl₃ were successfully prepared by assembling chiral D/L tert-butyl prolinate with manganese (II) chloride. Single crystal structures show the as-formed hybrids possess one-dimensional (1D) structure containing linear chains of face-sharing MnCl₆ octahedral surrounded by prolinate cations. The 1D Mn(II) hybrids display strong red emission peaked at 646 nm with PLQY of 67.1 % and 57.2 % for d -type and l -type, respectively, representing the highest PLQY for 1D Mn^II hybrids. Interestingly, the 1D Mn(II) hybrids exhibit prominent circular dichroism (CD) signals and remarkable CPL activity with the dissymmetry factor g of 6.1*10⁻³ and −6.3*10⁻³ from 550 to 800 nm for (D)- and (L)-(tert-butyl prolinate)MnCl₃, respectively, owing to the existence of chiral cations. It is worthy noted the obtained g represents the highest value for non-lead organic–inorganic hybrids.     

A Highly Sensitive and Selective Label-free Electrochemical Biosensor with a Wide Range of Applications for Bisphenol A Detection

A label-free DNA-based electrochemical biosensor owning high sensitivity and selectivity has been established for detecting bisphenol A in a wide range of applications. Coupling the high electrochemical performance of graphene oxide-thionine-Au nanomaterial with the specific binding capacity of the aptamers to BPA, the monitoring of trace amount of BPA was realized, the detection limit was 3.3 pg ⋅ mL⁻¹ with strong anti-interference. Besides, using molecular docking, it was found that BPA binds to the bases DC-49, DC-51, DG-52, DG-53 and DA-63 on the aptamer via hydrogen bonding and π-π stacking interactions. Finally, the biosensor had been successfully applied in different real samples.     

SO42-促进的中孔含锆分子筛催化合成乙酸松油酯的研究

合成了中孔含锆分子筛Zr-MCM-41，用H2SO4对Zr-MCM-41进行修饰，得到SO4^2-促进的中孔含锆分子筛SO4^2-／Zr-MCM-41．通过XRD、FT—IR表征了其结构．结果表明：Zr—MCM-41和SO4^2-／Zr—MCM-41具有中孔分子筛的特征结构、良好的长程有序性和结晶度；SO4^2-已进入Zr—MCM-41骨架内部，并与骨架原子形成了化学键，从而产生强酸中心，将SO4^2-／Zr—MCM-41用于催化合成乙酸松油酯，考察了催化剂的种类、反应温度、反应时间及反应物配比对松油醇酯化反应结果的影响．     

大米中硒的FI-HG-AAS测定方法研究

研究了原子化器温度、载气流速、KBH4 浓度等条件对流动注射 氢化物发生 原子吸收光谱法 (FI-HG -AAS)测定硒时的影响。建立了FI-HG -AAS测定大米中硒的分析方法。在优化的工作条件下 ,测定硒的最低检测浓度为 0 3 3 μg·L- 1,线性范围为 0～ 5 0 μg·L- 1,相对标准偏差小于 4% ,加标回收率为 94%～ 1 0 2 %。本法克服了传统的间断氢化物发生 原子吸收光谱法分析速度慢、样品耗量大、操作繁琐且因手工进样在进样速度和进样体积上容易带来误差等缺点。方法操作简便、快速 ,灵敏度及自动化程度高 ,已广泛应用于大米及富硒大米中微量硒的测定     

硼酸溶液中氯柱硼镁石的溶解及相转化动力学

对氯柱硼镁石（2MgO•2B2O3•MgCl2•14H2O）在4.5％H3BO3水溶液40 ℃的溶解及相转化过程进行了动力学研究.对不同时间取出的液相的化学分析及不同阶段分离固相的鉴定结果表明,该复盐在溶解阶段出现与前所报导不同的同步溶解，最终产物是库水硼镁石（2MgO•3B2O3•15H2O）.提出了库水硼镁石的形成条件和溶解及相转化动力学机理，利用单纯形优化法配合Runge-Kutta微分方程组数值解法对实验数据进行处理，给出了转化结晶动力学方程.     

流动注射原子吸收光谱法测定富硒天麻、葡萄及大米中的硒

建立了流动注射氢化物发生-原子吸收光谱法测定富硒天麻、葡萄及大米中硒的方法。测定硒的线性范围为0．33μg/L-50μg/L，相对标准偏差小于3％，加标回收率为93％-106％。方法已广泛应用于实际样品中微量硒的测定。     

Highly Enantioselective Kinetic Resolution of Axially Chiral BINAM Derivatives Catalyzed by a Brønsted Acid

A highly efficient strategy for the kinetic resolution of axially chiral BINAM derivatives involving a chiral Brønsted acid‐catalyzed imine formation and transfer hydrogenation cascade process was developed. The kinetic resolution provides a convenient route to chiral BINAM derivatives in high yields with excellent enantioselectivities.     

Electrochemical Synthesis of Tetrahexahedral Rhodium Nanocrystals with Extraordinarily High Surface Energy and High Electrocatalytic Activity

Noble metal nanocrystals (NCs) enclosed with high‐index facets hold a high catalytic activity thanks to the high density of low‐coordinated step atoms that they exposed on their surface. Shape‐control synthesis of the metal NCs with high‐index facets presents a big challenge owing to the high surface energy of the NCs, and the shape control for metal Rh is even more difficult because of its extraordinarily high surface energy in comparison with Pt, Pd, and Au. The successful synthesis is presented of tetrahexahedral Rh NCs (THH Rh NCs) enclosed by {830} high‐index facets through the dynamic oxygen adsorption/desorption mediated by square‐wave potential. The results demonstrate that the THH Rh NCs exhibit greatly enhanced catalytic activity over commercial Rh black catalyst for the electrooxidation of ethanol and CO.     

Heterogeneous Solution NMR Signal Amplification by Reversible Exchange

A novel variant of an iridium‐based organometallic catalyst was synthesized and used to enhance the NMR signals of pyridine in a heterogeneous phase by immobilization on polymer microbead solid supports. Upon administration of parahydrogen (pH₂) gas to a methanol mixture containing the HET‐SABRE catalyst particles and the pyridine, up to fivefold enhancements were observed in the ¹H NMR spectra after sample transfer to high field (9.4 T). Importantly, enhancements were not due to any residual catalyst molecules in solution, thus supporting the true heterogeneity of the SABRE process. Further significant improvements may be expected by systematic optimization of experimental parameters. Moreover, the heterogeneous catalyst is easy to separate and recycle, thus opening a door to future potential applications varying from spectroscopic studies of catalysis, to imaging metabolites in the body without concern of contamination from expensive and potentially toxic metal catalysts or accompanying organic molecules.