Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.     

样条空间S~μ_k（△）的维数

本文考虑了欧式空间Ｒ￣ｎ中任意单纯形剖分上的样条函数空间．证明了当ｋ≥（３μ＋１）２￣（ｎ－２）＋１时，计算任意单纯形剖分Δ上的ｋ次μ阶光滑样条空间的维数，可归结为计算每个σ－关联域（ｉ－单纯形σ∈Δ）Ｒ（σ）上的２￣（ｎ－ｉ－１）μ次μ阶光滑（ｉ≤ｎ－１）样条空间的维数。这里σ－关联域Ｒ（σ）是指Δ中所有包含σ的单纯形所成的单纯形剖分．     

Superconvergence of discontinuous Galerkin finite element method for the stationary Navier‐Stokes equations

This article focuses on discontinuous Galerkin method for the two‐ or three‐dimensional stationary incompressible Navier‐Stokes equations. The velocity field is approximated by discontinuous locally solenoidal finite element, and the pressure is approximated by the standard conforming finite element. Then, superconvergence of nonconforming finite element approximations is applied by using least‐squares surface fitting for the stationary Navier‐Stokes equations. The method ameliorates the two noticeable disadvantages about the given finite element pair. Finally, the superconvergence result is provided under some regular assumptions. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 23: 421–436, 2007     

La掺杂浓度对PLZT薄膜红外光学性质的影响

采用溶胶-凝胶法在Pt/Ti/SiO2/Si衬底上制备了不同La掺杂浓度PLZT(x/40/60)薄膜- x射线衍射分析表明制备的PLZT(x/40/60)薄膜是具有单一钙钛矿结构的多晶薄膜- 通过红外椭圆偏振光谱仪测量了波长为2-5—12-6μm范围内PLZT薄膜的椭偏光谱，采用经典色 散模型拟合获得PLZT薄膜的红外光学常数，同时也拟合获得PLZT薄膜的厚度- 随着La掺杂浓 度的增大，折射率逐渐减小- 而消光系数除PLZT(4/40/60)薄膜外，呈现逐渐增大的趋势- 分析表明这些差异主要与PLZ 关键词： PLZT薄膜 红外光学性质 红外椭圆偏振光谱     

Generalization of a sharp Hölder's inequality and its application

In this paper, we generalize Hu Ke's sharpness of Hölder's inequality. As application, the obtained result is used to improve the well-known Opial-Olech inequality.     

利用富铈混合稀土改善工业纯铝中富铁相形貌的研究

利用金相分析方法研究了富Ce混合稀土变质对含不同Fe量的工业纯铝的组织和其中富铁相形貌的影响。试验结果表明,随着Fe含量的增加,富铁相由弥散细小的颗粒状向短棒状、长针状转变;富Ce混合稀土变质使铝中的富铁相由长针状变为弥散细小的颗粒状。随着稀土含量的增加,-αAl晶粒逐渐细化,富铁相尺寸及数量逐渐减小。添加0.5%稀土时,-αAl晶粒细化效果最佳,而且富铁相呈细小颗粒状均匀分布在-αAl基体的晶界处。本文还对稀土改善富铁相的机制进行了分析。     

Bivariate Recursive Equations on Excess-of-loss Reinsurance

This paper investigates bivariate recursive equations on excess-of-loss reinsurance. For an insurance portfolio, under the assumptions that the individual claim severity distribution has bounded continuous density and the number of claims belongs to R1 （a, b） family, bivariate recursive equations for the joint distribution of the cedent＇s aggregate claims and the reinsurer＇s aggregate claims are obtained.     

Effects of SnO2 addition on the magnetic properties of manganese zinc ferrites

SnO₂ was added to high-permeability MnZn ferrites and MnZn ferrites for high-frequency power supplies. The effects of the SnO₂ addition were studied. Sn⁴⁺ ions can dissolve into the spinel lattice and form stable Fe²⁺–Sn⁴⁺ pairs and hence can compensate the magneto-crystalline anisotropy constant K₁ and improve the initial permeability effectively. The initial permeability of ferrites is also improved as abnormal grain growth caused by ion vacancy is controlled with SnO₂ doping. In addition, the SnO₂ doping also leads to a decrease in the relative loss factor and an increase in density. The power loss and minimum power loss temperature decrease with SnO₂ doping.     

Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.