Substitution-Inert Metal Complex Mobile Phases in Non-Suppressed Cation Chromatography

Substitution-inert metal complexes, [Co(edda)(H₂O)₂]⁺, (Co(edda)(en)]⁺, [Co(edda)(dmen)]⁺, [Co(en)₂-(gly)]²⁺, [Co(en)₂(acac)]²⁺, and [Co(trien)(gly)]²⁺ in their nitrate salt solutions are used as eluents in nonsuppressed cation chromatography (where edda = ethylenediamine-N,N′-diacetic acid, en = ethylenediamine, dmen = N,N′-dime-thylethylenediamine, gly = glycine, acac = acetylacetone, and trien = triethylenetetraamine). It is found that all the mono- and di-valent charged complexes can be used to separate alkali and alkaline earth metal cations, respectively. The separations for monovalent cations are sometimes comparable to those using ultrapure HNO₃ solutions. However, the divalent Ca²⁺ and Sr²⁺ ions cannot be resolved using the metal complex eluents. On the other hand, a selected, direct non-suppressed IC separation of zinc(II) and cadmium(II) ions is demonstrated for the first time using a substitution-inert metal complex eluent and a conductivity detector. Comparisons of these eluents with those reported previously, i. e. HNO₃ and ethylenediammonium salt solution are made and explanations are proposed to account for the different selectivities observed where possible. The future development of this technique is also briefly discussed.     

Temporal Response of SERS to the Potential for 4-Cyanopyridine Adsorbed on Ag Electrode

Time-resolved surface-enhanced Raman scattering (SERS) was applied to study the response of Raman bands from 4-cyanopyridine (PyCN) adsorbed on a Ag electrode to variation of the potential; the temporal resolution was 0.1 s. The response of the SERS signals of PyCN was instantaneous to the oxidation potential of Ag electrode. However, delay of the SERS signals was observed while AgCl was reducing. The decay and growth of the SERS bands look place within 1 s in the cases of desorption and adsorption of PyCN on the electrode. It took much longer for PyCN to alter from one adsorption geometry to another on the electrode.     

Polyoxygenated Klysimplexane- and Eunicellin-Based Diterpenoids from the Gorgonian Briareum violaceum

Three new polyoxygenated diterpenoids with a rare 4-isopropyl-1,5,8a-trimethylperhydrophenanthrane structure of the klysimplexane skeleton, briarols A‒C (1‒3), and one eunicellin-based diterpenoid, briarol D (4), were isolated from Briareum violaceum, a gorgonian inhabiting Taiwanese waters. The chemical structures of these compounds were determined by employing extensive analyses of NMR and high-resolution electrospray ionization mass spectrometry (HRESIMS) data. Metabolites 1‒3 were found to possess the rarely found skeleton of the diterpenoid klysimplexin T. All isolated compounds showed very weak cytotoxic activity against the growth of three cancer cell lines. A plausible biosynthetic pathway for briarols A‒C from the coexisting eunicellin diterpenoid briarol D (4) was postulated.     

Photolysis of NSAIDs. Part 3: Structural elucidation of photoproducts of tolmetin in methanol

A sample of 10 mM tolmetin in methanol was photo-irradiated with a Hanovia 200 W high-pressure quartz Hg lamp for four days. In total, eight photoproducts were observed from the HPLC chromatogram. Three major photoproducts were separated, and their structures were elucidated by spectroscopic methods. The structures of all photoproducts were further determined by LC-ESI-MS. A reaction scheme of tolmetin was proposed.     

Precise and accurate determination of the stoichiometry of CuInS2 semiconductor material by electrochemical methods

Summary CuInS₂ is one of the important I–III–VI₂ ternary compounds which has in recent years received increasing interest in semiconductor science. In this study an electrochemical method has been developed based on a limited amount of available sample (0.5–10mg) for the precise and accurate determination of CuInS₂ composition. After decomposition of the sample in concentrated HNO₃ under pressure, copper and indium were sequentially determined by constant potential coulometry, and sulfur (as sulfate) by amperometric titration. Various experimental parameters which ensure high precision and accuracy of the results were carefully evaluated and calibrated. The overall errors for the determination of copper, indium and sulfur in a 10 mg sample were found to be +0.10%, –0.12% and +0.16%, respectively, which fullfills the requirement for accurate stoichiometric assessment.

---

Reproduzierbare und genaue Bestimmung der Stöchiometrie von CuInS₂-Halbleitermaterial mit Hilfe elektrochemischer Verfahren

---

Presented at the 10th International Symposium on Microchemical Techniques, August 25–29, 1986, Antwerp, Belgium     

Briarenolide E: the first 2-ketobriarane diterpenoid from an octocoral Briareum sp. (Briareidae)

A novel 2-ketobriarane diterpenoid, briarenolide E (1), was isolated from an octocoral Briareum sp. The structure of briarane 1 was elucidated by interpretations of spectral data. Compound 1 displayed modestly inhibitory effects on the generation of superoxide anions and the release of elastase by human neutrophils.     

Synthesis,photophysical and electrochemical studies of di-2-pyridyl ketone complexes of rhodium(III)

Complexes of rhodium(III) with di-2-pyridyl ketone (dpk), Rh(dpk)(MeCN)Cl₃ (1) and cis-[Rh(dpk)₂Cl₂]⁺ (2), have been successfully prepared and characterized. At low temperature (77 K), complex (2) in EtOH/MeOH (4:1, v/v) shows a broad, symmetric and structureless red emission with a microsecond lifetime and, hence, is assigned as the dd* phosphorescence. Electrochemical data, including cyclic voltammetry, normal pulse voltammetry, triple pulse voltammetry and controlled potential electrolysis, have been obtained for the two dpk complexes of rhodium(III) in MeCN. On the basis of analysis of the electrochemical (1,2) and luminescence data (2), electron transfer mechanisms are proposed. For complex (1), two reduction processes occur at the metal-localized orbitals with elimination of chlorides during the first reduction step. This is followed by a one-electron reduction at the metal. For complex (2), three electrons are transferred to the metal in two successive reduction steps accompanied by elimination of two chlorides. After these two reduction steps another one-electron reduction occurs at the dpk ligand.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.     

An Efficient Method for Preparing the α-Deuterated-α,β-Unsaturated Carbonyl Compounds by Reaction of Stable Phosphonium Ylides with Carbonyl Compounds in Deuterium Oxide

Carbonyl compounds reacted with stable phosphonium ylides in D₂O to give α-deuterated-α,β-unsaturated carbonyl compounds in the same flask. The chemical yield and deuterium incorporation are excellent under our procedure. The fragile group like ozonide was compatible with our reaction condition.