Rapid determination of underivatized pyroglutamic acid, glutamic acid, glutamine and other relevant amino acids in fermentation media by LC-MS-MS

Determination of amino acids in a complex matrix without derivatization is advantageous, however, difficulties are found in both the detection and the separation of those compounds. In this study, a rapid and reliable LC-MS-MS method for the quantitation of underivatized amino acids in exocellular media was established. Injections were made directly after centrifugation of the samples, without further preparation. The separation of seven underivatized amino acids was achieved on a reversed-phase C18 column with pentadecafluorooctanoic acid as a volatile ion-pair reagent, and the specific detection of most amino acids was achieved by MS-MS of the specific transitions [M + H]+-->[M + H - 46]+. The calibration curves of all analytes were linear over the range of 1.0-1000 microg ml(-1) and the detection limits ranged from 0.1 to 5 ng ml(-1), with an injection volume of 20 microl. The inter-day and intra-day precisions ranged from 2.6 to 5.7% and 4.8 to 8.2%, respectively; the mean recoveries of the seven analytes were 81-104%, 91-107% and 93-101% respectively at the spiked level of 10, 40 and 200 microg ml(-1). A large number of fermentation samples were analysed using this method. The technique is simple, rapid, selective and sensitive, and shows potential for the high-throughput quantitation of amino acids from other biological matrices.     

DMF体系中Cu2O球晶的制备及形貌分析

以N,N-二甲基甲酰胺(DMF)为溶剂,通过改变铜源和表面活性剂,调控反应参数,溶剂热条件下制备了三维十字形、空心及实心的Cu₂O球晶。利用XRD、SEM等表征手段,分析探讨了工艺条件变化对Cu₂O球晶形貌的影响。研究表明,随着DMF浓度的增大,体系的还原能力增强,Cu⁺增多,溶液的过饱和度增大,Cu₂O晶体集合体形态由晶体结构控制的各向异性与对称性的球晶逐渐向各向同性球晶演变。十二烷基硫酸钠(SDS)、十六烷基三甲基溴化铵(CTAB)、聚乙烯吡咯烷酮(PVP)等表面活性剂有助于降低溶液的过饱和度,增加结晶质的表面扩散能力,有利于规则形态Cu₂O晶粒的形成。反应体系中,Cu(Ac)₂·H₂O水解生成的羧基与DMF中的甲酰基在高温下发生脱羧反应产生CO₂气体以及SDS发泡作用产生的气体是形成空心Cu₂O球晶的重要原因。     

镓-铬蓝黑R络合吸附波的研究及应用

在0.012mol/L HAc-0.10mol/L NaAc缓冲溶液中pH5.60,铬蓝黑R于-0.34V(vs.SCE)处有一极谱波P_1,加入Ga(Ⅲ),在-0.55V(vs.SCE)处产生一灵敏的极谱波P_2。i_p_2与Ga(Ⅲ)浓度在0.20～15.0μg/25ml范围内呈线性关系。试验表明,该极谱波属络合吸附波。本法用于测定铝箔、铅锌矿中微量镓,结果满意。     

基于裂开型核酸适配体的液晶生物传感检测三磷酸腺苷

利用“适配体-目标分子-适配体”的“三明治”夹心方式构建液晶生物传感检测三磷酸腺苷(ATP). 将ATP核酸适配体片段作为捕获探针固定在经TEA/DMOAP混合组装膜修饰的玻片基底表面, 当ATP存在时, 裂开的两部分核酸适配体与ATP结合形成双链结构, 有效诱导液晶分子取向发生变化从而引起光学信号的亮度及颜色发生变化, 实现对ATP的检测, 该方法在ATP浓度为10 nmol/L时仍可观测到明显的光学信号变化. 这种“适配体-目标分子-适配体”的“三明治”夹心式液晶生物传感方法具有无需标记, 操作简单等特点, 在快速检测小分子等物质领域中有广泛的应用前景.     

甲基多烯醛共轭体系电子光谱及线性关系的MHMO法研究

甲基多烯醛共轭体系电子光谱及线性关系的ＭＨＭＯ法研究马生元（青海民族学院化学系西宁８１０００７）关键词甲基多烯醛，电子光谱，线性关系，ＭＨＭＯ法有机共轭同系物的电子光谱有广泛的线性关系［１－３］，这是分子周期性结构的必然结果。分子电子光谱则是分子中轨...     

Aptamer-wrapped gold nanoparticles for the colorimetric detection of omethoate

Organophosphorous pesticide(OP) contamination has serious adverse effects on human health and the environment. Due to the toxicity of OPs and the threat presented by their accidental or intentional release in populated areas, the determination and monitoring of these OPs in food products and environment is of great importance. OPs are present in very small quantities and therefore, methods for their detection need to be highly sensitive and selective. Here, we aimed to develop a simple and selective aptamer-based colorimetric assay for the detection of omethoate, which is one of the commonly used OPs. The principle of the assay is that single-stranded DNA(ss DNA)-wrapped gold nanoparticles(Au NPs) are resistant to salt-induced aggregation. By employing an "artificial antibody" organophosphorous pesticide-binding aptamer(OBA) as the recognition element, aptamer-wrapped Au NPs(Au-apta) show high selectivity towards omethoate, resulting in the disconnection of aptamers from Au NPs and the aggregation of Au NPs. As there is a significant color change from the interparticle plasmon coupling during the aggregation of Au NPs, the established assay showed good linearity between 0.1 and 10 μmol/L, with a low detection limit of 0.1 μmol/L. Other OPs such as profenofos, phorate, and isocarbophos would not interfere with the detection of omethoate despite having similar structures. Thus, the colorimetric method shows potential for use in the detection of omethoate in real soil samples.     

Polymerizable Molecular Silsesquioxane Cage Armored Hybrid Microcapsules with In Situ Shell Functionalization

We prepared core–shell polymer–silsesquioxane hybrid microcapsules from cage‐like methacryloxypropyl silsesquioxanes (CMSQs) and styrene (St). The presence of CMSQ can moderately reduce the interfacial tension between St and water and help to emulsify the monomer prior to polymerization. Dynamic light scattering (DLS) and TEM analysis demonstrated that uniform core–shell latex particles were achieved. The polymer latex particles were subsequently transformed into well‐defined hollow nanospheres by removing the polystyrene (PS) core with 1:1 ethanol/cyclohexane. High‐resolution TEM and nitrogen adsorption–desorption analysis showed that the final nanospheres possessed hollow cavities and had porous shells; the pore size was approximately 2–3 nm. The nanospheres exhibited large surface areas (up to 486 m² g^?1) and preferential adsorption, and they demonstrated the highest reported methylene blue adsorption capacity (95.1 mg g^?1). Moreover, the uniform distribution of the methacryloyl moiety on the hollow nanospheres endowed them with more potential properties. These results could provide a new benchmark for preparing hollow microspheres by a facile one‐step template‐free method for various applications.     

Absolute exponential stability criteria for a class of nonlinear time-delay systems

This paper is concerned with the problem of absolute exponential stability analysis for a class of continuous-time systems with sector-bounded nonlinearities and interval time-varying delays. Absolute exponential stability criteria, which depend not only on the delay range but also on the decay rate, are derived by using a novel Lyapunov functional. These criteria are expressed in the form of linear matrix inequalities (LMIs) and they can easily be checked. By solving these LMIs, estimates of the exponential decay rate and decay coefficient are obtained. A numerical example is provided to demonstrate the effectiveness of the proposed method.     

高速CCTS光双稳激光器的研究

从速率方程出发对双区共腔（ｃｏｍｍｏｎ－ｃａｖｉｔｙｔｗｏｓｅｃｔｉｏｎ简称ＣＣＴＳ）光双稳激光器进行了精确的理论分析与计算，并对其稳态特性进行了实验研究和测试，得出了定量和定性的分析结果，同时还首次发现当激光输出高态出又出现了一次光双稳和开关效应。经研究确认是量子阱探测器的自电光效应，并提出一种可集成双逻辑功能显示的新型网络模型器件。     

Large Scale Production of Continuous Hydrogel Fibers with Anisotropic Swelling Behavior by Dynamic‐Crosslinking‐Spinning

Hydrogel microfibers have been considered as a potential biomaterial to spatiotemporally biomimic 1D native tissues such as nerves and muscles which are always assembled hierarchically and have anisotropic response to external stimuli. To produce facile hydrogel microfibers in a mathematical manner, a novel dynamic‐crosslinking‐spinning (DCS) method is demonstrated for direct fabrication of size‐controllable fibers from poly(ethylene glycol diacrylate) oligomer in large scale, without microfluidic template and in a biofriendly environment. The diameter of fibers can be precisely controlled by adjusting the spinning parameters. Anisotropic swelling property is also dependent on inhomogeneous structure generated in spinning process. Comparing with bulk hydrogels, the resulting fibers exhibit superior rapid water adsorption property, which can be attributed to the large surface area/volume ratio of fiber. This novel DCS method is one‐step technology suitable for large‐scale production of anisotropic hydrogel fibers which has a promising application in the area such as biomaterials.