Detoxified pneumolysin derivative ΔA146Ply inhibits autophagy and induces apoptosis in acute myeloid leukemia cells by activating mTOR signaling

Leukemia is caused by the malignant clonal expansion of hematopoietic stem cells, and in adults, the most common type of leukemia is acute myeloid leukemia (AML). Autophagy inhibitors are often used in preclinical and clinical models in leukemia therapy. However, clinically available autophagy inhibitors and their efficacy are very limited. More effective and safer autophagy inhibitors are urgently needed for leukemia therapy. In a previous study, we showed that ΔA146Ply, a mutant of pneumolysin that lacks hemolytic activity, inhibited autophagy of triple-negative breast cancer cells by activating mannose receptor (MR) and toll-like receptor 4 (TLR4) and that tumor-bearing mice tolerated ΔA146Ply well. Whether this agent affects AML cells expressing TLR4 and MR and the related mechanisms remain to be determined. In this study, we found that ΔA146Ply inhibited autophagy and induced apoptosis in AML cells. A mechanistic study showed that ΔA146Ply inhibited autophagy by activating mammalian target of rapamycin signaling and induced apoptosis by inhibiting autophagy. ΔA146Ply also inhibited autophagy and induced apoptosis in a mouse model of AML. Furthermore, the combination of ΔA146Ply and chloroquine synergistically inhibited autophagy and induced apoptosis in vitro and in vivo. Overall, this study provides an alternative effective autophagy inhibitor that may be used for leukemia therapy.Subject terms: Translational research, Acute myeloid leukaemia     

ZnO纳米棒在Si衬底上外延生长研究

运用热蒸发ZnO粉末法,以金做催化剂,分别在Si(100)和Si(111)两种基片上外延生长了ZnO纳米棒(样品分别标为1#和2#).通过X射线衍射(XRD)和扫描电子显微镜(SEM)分析,结合ZnO与Si的晶格结构特征,从理论上得出了两个样品的晶格匹配关系.1#样品:[0001]ZnO∥[114]Si,[0001]ZnO∥[1-1-4]Si,[0001]ZnO∥[11-4]Si,[0001]ZnO∥[1-14]Si,失配度为1.54;;2#样品:[0001]ZnO∥[111]Si,[21-1-0]ZnO∥[11-0]Si,[1-21-0]ZnO∥[1-01]Si ,[1-1-20]ZnO∥[011-]Si,失配度为18.12;.研究表明Si衬底对ZnO纳米棒生长方向具有调控作用.     

Phenothiazine-based covalent organic frameworks with low exciton binding energies for photocatalysis

Designing delocalized excitons with low binding energy (E_b) in organic semiconductors is urgently required for efficient photochemistry because the excitons in most organic materials are localized with a high E_b of >300 meV. In this work, we report the achievement of a low E_b of ∼50 meV by constructing phenothiazine-based covalent organic frameworks (COFs) with inherent crystallinity, porosity, chemical robustness, and feasibility of bandgap engineering. The low E_b facilitates effective exciton dissociation and thus promotes photocatalysis by using these COFs. As a demonstration, we subject these COFs to photocatalytic polymerization to synthesize polymers with remarkably high molecular weight without any requirement of the metal catalyst. Our results can facilitate the rational design of porous materials with low E_b for efficient photocatalysis.

We report the construction of phenothiazine-based covalent organic frameworks, which exhibited diverse structures, the feasibility of bandgap engineering, and unprecedented ultralow exciton binding energy of ∼50 meV for photocatalytic polymerization.     

A Bregman-Split-Based Compressive Sensing Method for Dynamic Harmonic Estimation

In order to overcome the spectral interference of the conventional Fourier transform in the International Electrotechnical Commission framework, this paper introduces a Bregman-split-based compressive sensing (BSCS) method to estimate the Taylor–Fourier coefficients in a multi-frequency dynamic phasor model. Considering the DDC component estimation, this paper transforms the phasor problem into a compressive sensing model based on the regularity and sparsity of the dynamic harmonic signal distribution. It then derives an optimized hybrid regularization algorithm with the Bregman split method to reconstruct the dynamic phasor estimation. The accuracy of the model was verified by using the cross entropy to measure the distribution differences of values. Composite tests derived from the dynamic phasor test conditions were then used to verify the potentialities of the BSCS method. Simulation results show that the algorithm can alleviate the impact of dynamic signals on phasor estimation and significantly improve the estimation accuracy, which provides a theoretical basis for P-class phasor measurement units (PMUs).     

Quantum Circuit Optimization for Solving Discrete Logarithm of Binary Elliptic Curves Obeying the Nearest-Neighbor Constrained

In this paper, we consider the optimization of the quantum circuit for discrete logarithm of binary elliptic curves under a constrained connectivity, focusing on the resource expenditure and the optimal design for quantum operations such as the addition, binary shift, multiplication, squaring, inversion, and division included in the point addition on binary elliptic curves. Based on the space-efficient quantum Karatsuba multiplication, the number of CNOTs in the circuits of inversion and division has been reduced with the help of the Steiner tree problem reduction. The optimized size of the CNOTs is related to the minimum degree of the connected graph.     

Development of a Quantitative Method for Detection of Multiclass Veterinary Drugs in Feed Using Modified QuPPe Extraction and LC–MS/MS

A method was developed for the rapid and quantitative analysis of 30 veterinary drugs belonging to 17 classes (amphenicols (1), anthelmintics (1), cephalosporins (4), coccidiostats (1), lincosamides (1), macrolide (1), nitroimidazole (1), penicillins (3), phenylhydrazines (1), polypeptides (1), pyrethrins (1), quinolones (5), sulfonamides (3), tetracycline (3), neuroleptic agents (1), triazene trypanocidal agents (1), other. (1)) in feeds. The proposed method with a modified Quick Polar Pesticides (QuPPe) sample preparation was validated for the determination of 30 veterinary drugs in feed samples by liquid chromatography triple-quadrupole mass spectrometry (LC–MS/MS). The sample was extracted with methanol containing 1% acetic acid and purified by dispersive solid-phase extraction (d-SPE) with C18. Good linearity (r² ≥ 0.98) was observed, and the LOQ values ranged from 10 to 200 µg/kg. Average recoveries ranged from 70.8 to 118.4%, and the relative standard deviation was ≤ 18.7%. This validated method was used in the determination of 30 veterinary drugs in 142 feed samples obtained from South Korea. The results show that lincomycin was present in only one of the tested feed samples, although it was detected at a value lower than the LOQ. In conclusion, this multi-residue method can be used for screening through the detection and quantitation of residual multiclass veterinary drugs in feed samples.     

Dynamic synovial fibroblasts are modulated by NBCn1 as a potential target in rheumatoid arthritis

Rheumatoid arthritis (RA) is an autoimmune disease characterized by aggressive fibroblast-like synoviocytes (FLSs) and pannus formation. Various therapeutic strategies have been developed against inflammatory cytokines in RA in recent decades. Based on the migratory features of FLSs, we examined whether modulation of the migratory module attenuates RA severity. In this study, inflamed synovial fluid-stimulated FLSs exhibited enhanced migration and migratory apparatus expression, and sodium bicarbonate cotransporter n1 (NBCn1) was identified in primary cultured RA-FLSs for the first time. The NBC inhibitor S0859 attenuated the migration of FLSs induced with synovial fluid from patients with RA or with TNF-α stimulation. Inhibition of NBCs with S0859 in a collagen-induced arthritis (CIA) mouse model reduced joint swelling and destruction without blood, hepatic, or renal toxicity. Primary FLSs isolated from the CIA-induced mouse model also showed reduced migration in the presence of S0859. Our results suggest that inflammatory mediators in synovial fluid, including TNF-α, recruit NBCn1 to the plasma membrane of FLSs to provide dynamic properties and that modulation of NBCn1 could be developed into a therapeutic strategy for RA.Subject terms: Chemotaxis, Bone, Ion channel signalling, Rheumatoid arthritis, Drug development     

Synthesis and characterization of thermally crosslinkable hole‐transporting polymers for PLEDs

Two new thermally crosslinkable hole‐transporting polymers, X‐PTPA and X‐PCz, were synthesized via Yamamoto coupling reactions. The number‐averaged molecular weights (M_n) of X‐PTPA and X‐PCz were found to be 45,000 and 48,000, respectively, and therewith, polydispersity indices were of 1.8 and 1.7, respectively. Thermally crosslinked X‐PTPA and X‐PCz exhibit excellent solvent resistance and stable optoelectronic properties. The UV–visible maximum absorption peaks of X‐PTPA and X‐PCz in the thin film state are at 389 and 322 nm, respectively. The HOMO levels of X‐PTPA and X‐PCz are estimated to be ?5.27 and ?5.39 eV, respectively. Multilayered devices (ITO/crosslinked X‐PTPA or X‐PCz/SY‐PPV/LiF/Al) were fabricated with SY (SuperYellow) as the emitting layer. The maximum efficiency of the multilayered device with a crosslinked X‐PTPA layer is approximately three times higher than that of the device without a crosslinked X‐PTPA layer and much higher than that of the crosslinked X‐PCz device. This result can be explained by the observations that crosslinked X‐PTPA produces increased electron accumulation within the emitter, SY, and also efficient exciton formation due to improved charge balance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5111–5117     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

Facile synthesis of sulfenyl-substituted isocoumarins,heterocycle-fused pyrones and 3-(inden-1-ylidene)isobenzofuranones by FeCl3-promoted regioselective annulation of o-(1-alkynyl)benzoates and o-(1-alkynyl)heterocyclic carboxylates with disulfides

Reported herein is the FeCl₃-promoted intermolecular sulfoesterification of o-(1-alkynyl)benzoates with disulfides, which provides a convenient and efficient method for synthesis of 4-sulfenylisocoumarins. Various functional groups such as methoxy, halides, ester, cyano and silicon groups in the substrates are tolerated, and heterocycle-fused chalcogenylpyrones are also successfully achieved directly from the corresponding heterocyclic precursors under the same reaction conditions. In addition, starting from diynylbenzoate, this reaction sequence can be combined with a bicyclization step leading to the tetracyclic (E)-3-(2-phenyl-3-phenylchalcogenylinden-1-ylidene)isobenzofuranone frameworks with high regiospecificity and exclusive trans stereoselectivity.