高超声速飞行器高温流场对激光武器毁伤效应的影响

以美国ABL系统激光武器为例,分析了高超声速飞行器高温流场气体影响激光武器毁伤效应的一些主要因素,包括气体击穿、等离子体屏蔽效应、烧蚀产物颗粒的影响。结果表明:通常情况下,流场电子数密度小于1017cm-3,流场本身等离子体特性不会引起对激光的等离子体屏蔽效应;只有在0.5 km射程以内和宽脉冲激光引起的高压流场(约10 MPa以上)气体击穿,才会导致明显的等离子体屏蔽效应,但在实际战场条件下这种情况一般不会发生;对采用烧蚀手段进行防热的飞行器而言,飞行高度大于10 km,并且基于自由来流流量的无量纲化烧蚀流量小于10-2左右时,烧蚀产物颗粒不会引起激光的衰减。     

应用于白光显示的Tm3+/Ho3+/Yb3+共掺碲酸盐玻璃上转换发光特性研究

用高温熔融法制备了Tm³⁺/Ho³⁺/Yb³⁺共掺碲酸盐玻璃(TeO₂-ZnO-La₂O₃)样品,测试了玻璃样品的吸收光谱和上转换发光光谱,分析了上转换发光机理.结果发现:在975 nm波长激光二极管(LD)激励下,制备的碲酸盐玻璃样品可以观察到强烈的红光(662 nm)、绿光(546 nm)和蓝光(480 nm)三基色上转换发光,红光对应于Tm³⁺离子 关键词： 碲酸盐玻璃 上转换发光 白光 3+/Ho³⁺/Yb³⁺共掺')" href="#">Tm³⁺/Ho³⁺/Yb³⁺共掺     

Synthesis and characterization of Sr3Al2O6：Eu2＋, Dy3＋ phosphors prepared by sol-gel-combustion processing

A type of red luminescent Sr3Al2O6:Eu2+, Dy3+ phosphor powder is synthesised by sol-gel-combustion processing, with metal nitrates used as the source of metal ions and citric acid as a chelating agent of metal ions. By tracing the formation process of the sol-gel, it is found that it is necessary to reduce the amount of NO3- by dropping ethanol into the solution for forming a stable and homogeneous sol-gel. Thermogravimetric and Differential Scanning Calorimeter Analysis, x-ray diffractionmeter, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the luminescent properties of the as-synthesised Sr3Al2O6:Eu2+, Dy3+. The results reveal that the Sr3Al2O6 crystallises completely when the combustion ash is sintered at 1250 C. The excitation and the emission spectra indicate that the excitation broadband lies mainly in a visible range and the phosphors emit a strong light at 618 nm under the excitation of 472 nm. The afterglow of (Sr0.94Eu0.03Dy0.03)3Al2O6 phosphors sintered at 1250 ℃ lasts for over 1000 s when the excited source is cut off.     

微波分光仪角锥喇叭天线的优化

简述了角锥喇叭天线的设计原理,对微波分光仪角锥喇叭天线进行了优化设计.结果表明,优化后的角锥喇叭天线单向传输性与增益均得到改善.     

裂解温度对CVD法制备多壁碳纳米管的影响

用SEM、TEM、HRTEM及拉曼光谱方法研究了催化裂解乙炔制备多壁碳纳米管过程中裂解温度的影响,结果表明,在650℃～700℃裂解乙炔,可获得产量高、直径分布均匀、石墨程度高的多壁碳纳米管,并对裂解温度影响机制进行了分析和探讨。     

Cosmic ray test for a T0 detector

The endcap of time-of-flight (ETOF) detector in BES (Beijing Spectrometer) III is planned to be upgraded by using multi-gap resistive plate chambers (MRPCs) and the designed time resolution of the MRPCs is around 50 ps. Thus a time-zero (T0) detector needs to be built to offer a high quality reference time for the MRPCs beam test. So a T0 detector is built using plastic scintillator tiles (BC420) to couple with four fast phototubes (PMTs, Hamamatsu H6533). The timing properties of the detector is studied by using a cosmic ray test and factors related to the time resolution, such as plastic scintillator size, readout mode and angle effects, are discussed. T0 detector timing resolutions of ～41-62 ps are achieved, which means that the T0 detector can be used in the MRPC beam test.     

Carbide precipitates in solution-quenched PH13-8 Mo stainless steel: A small-angle neutron scattering investigation

This paper deals with the small-angle neutron scattering (SANS) investigation on solution-quenched PH13-8 Mo stainless steel. From the nature of the variation of the functionality of the profiles for varying specimen thickness and also from the transmission electron microscopy (TEM), it has been established that the small-angle scattering signal predominantly originates from the block-like metallic carbide precipitates in the specimen. The contribution due to double Bragg reflection is not significant in the present case. The single scattering profile has been extracted from the experimental profiles corresponding to different values of specimen thickness. In order to avoid complexity and non-uniqueness of the multi-parameter minimization for randomly oriented polydisperse block-like precipitate model, the data have been analyzed assuming randomly oriented polydisperse cylindrical particle model with a locked aspect ratio.     

Time-of-flight flow imaging using NMR remote detection

A time-of-flight imaging technique is introduced to visualize fluid flow and dispersion through porous media using NMR. As the fluid flows through a sample, the nuclear spin magnetization is modulated by rf pulses and magnetic field gradients to encode the spatial coordinates of the fluid. When the fluid leaves the sample, its magnetization is recorded by a second rf coil. This scheme not only facilitates a time-dependent imaging of fluid flow, it also allows a separate optimization of encoding and detection subsystems to enhance overall sensitivity. The technique is demonstrated by imaging gas flow through a porous rock.     

Trapped ion chain as a neural network: error resistant quantum computation

We demonstrate the possibility of realizing a neural network in a chain of trapped ions with induced long range interactions. Such models permit one to store information distributed over the whole system. The storage capacity of such a network, which depends on the phonon spectrum of the system, can be controlled by changing the external trapping potential. We analyze the implementation of error resistant universal quantum information processing in such systems.