Membrane deformation of unfixed erythrocytes in air with time lapse investigated by tapping mode atomic force microscopy

Estimation of the time of death is one of the most important problems for forensic medicine and law. Physical and chemical postmortem changes are evaluated together while estimating the time of death. The pattern analysis of antemortem and postmortem bloodstains is one of the important parameters for forensic science, and cellular changes of blood cells can be useful for the quantitative assessment of the time of death. In this study, by successively investigating erythrocytes exposed in air on mica for 5 days using tapping mode atomic force microscopy (TM-AFM), we observed deformation of whole cell and membrane surface of unfixed erythrocytes with time lapse. We found that the time-dependent cellular changes occurred after exposure of erythrocytes in air for several days. At 0.5 days of exposure, fissures and cell shrinkage were observed. At 2.5 days of exposure, the emergence of nanometer-scale protuberances were observed and these protuberances increased in number with increasing time. The changes of cell shape and cell membrane surface ultrastructure can be used to estimate the time of death. Futhermore, smear-induced abnormal erythrocytes and immunostained erythrocytes were observed here. The need for more precise research is indicated, such as the correlation of membrane changes to intervals of less than 0.5 day of air exposure, and use of various substrates in addition to mica, including glass, metals, fabrics, among others, on which the bloodstains appear in crime scenes. The results of this research demonstrate the efficacy of AFM as a potentially powerful analytical tool in forensic science.     

Quantum noise property in coherent atomic system

The coherent superposition of atomic states leads to the characteristic change of interacting lights because of the coupling between the lights and atoms. In this paper, the noise spectrum of the quantified light interacting with the atoms is studied under the condition of electromagnetically induced transparency (EIT). It is shown that the noise spectrum displays a double M-shape noise profile resulted from the conversion of phase noise of probe beam. A squeezing of 0.3 dB can be observed at the detuning of probe light at the proper parameters of atoms and coupling beam.     

Dual-order Raman fiber laser with suppressed low-frequency pump-to-stokes RIN transfer

By employing an output-power clamping technique, a dual-order Raman fiber laser (RFL) is theoretically presented with suppressed low-frequency relative-intensity-noise (RIN) transfer from pump sources to both first- and second-order Stokes output. Their powers can be easily tuned in a large dynamic range. Furthermore, the second-order output power can be individually controlled, which makes it flexible to adjust the ratio of the first- to second-order output power. In addition, the stabilization of low-power second-order output is also accomplished in the RFL setup. These properties fit the proposed RFL for use as dual-order pump sources in Raman fiber amplifiers.     

Wavelet and harmonic filtering for distortion-invariant volume holographic correlation

The wavelet and harmonic filtering method suggested by Zalevsky and Ouzieli is introduced in this paper and adopted in our volume holographic image recognition system. This composite filter combines several scaled versions of the cascaded wavelet and harmonic filter, obtaining high discrimination ability and wide dynamic range of rotation and scale deformations. Optical experiments are conducted to demonstrate the validity and practicability of the algorithm. To the best of our knowledge, this is the first report of using this algorithm in a volume holographic system. Moreover, the separate correlation approach proposed in this paper greatly simplifies the manufacturing process and reduces the cost of the system.     

Mn位W掺杂对La0.3Ca0.7MnO3体系磁结构的影响

通过对La0.3Ca0.7Mn1-xWxO3(x=0.00,0.04,0.08,0.12,0.15)多晶样品M-T曲线、M-H曲线及ESR谱的测量,研究了Mn位W掺杂对电荷有序体系La0.3Ca0.7MnO3磁结构的影响.结果表明,当掺杂量为0.00≤x≤0.08时,体系存在电荷有序(CO)相,AFM/CO态共存于相变温度以下,电荷有序温度TCO随着W掺杂量的增加而增加;x=0.04时,样品在低温下为FM相与AFM/CO相共存,在CO相建立前、后均有FM从PM中分离出来;当x≥0.12时,CO态融化,在极低温度下存在顺磁-铁磁(PM-FM)相变.     

激光与近相对论临界密度薄层相互作用产生大电量高能电子束

研究了激光与近相对论临界密度等离子体薄层相互作用时所产生的高能电子束的主要特征,包括平均有效温度以及截止能量等.实验结果表明,电子束的电量超过nC量级,平均有效温度可达8 MeV以上.PIC数值模拟证明,近相对论临界密度等离子体内,相对论自透明效应和激光钻孔效应共同形成一条磁化等离子体通道,电子与激光将在角向磁场的协助下发生Betatron共振.激光可将电子直接加速到很高能量,因此电子束平均有效温度("斜坡温度")远远超过Wilks定标率预计的平均温度.该研究为产生高亮度X射线源提供了一种新的可能途径.     

基于原位等离子体氮化及低压化学气相沉积-Si_3N_4栅介质的高性能AlGaN/GaN MIS-HEMTs器件的研究

通过对低压化学气相沉积(LPCVD)系统进行改造,实现在沉积Si_3N_4薄膜前的原位等离子体氮化处理,氮等离子体可以有效地降低器件界面处的氧含量和悬挂键,从而获得了较低的LPCVD-Si_3N_4/GaN界面态,通过这种技术制作的MIS-HEMTs器件,在扫描栅压范围V_(G-sweep)=(-30 V,+24 V)时,阈值回滞为186 mV,据我们所知为目前高扫描栅压V_(G+)(20 V)下的最好结果.动态测试表明,在400 V关态应力下,器件的导通电阻仅仅上升1.36倍(关态到开态的时间间隔为100μs).     

Near Continuum Velocity and Temperature Coupled Compressible Boundary Layer Flow over a Flat Plate

The problem of a compressible gas flows over a flat plate with the velocity-slip and temperature-jump boundary conditions are being studied. The standard single- shooting method is applied to obtain the exact solutions for velocity and temperature profiles when the momentum and energy equations are weakly coupled. A double-shooting method is applied if these two equations are closely coupled. If the temperature affects the velocity directly, more significant velocity slip happens at locations closer to the plate’s leading edge, and inflections on the velocity profiles appear, indicating flows may become unstable. As a consequence, the temperature-jump and velocity-slip boundary conditions may trigger earlier flow transitions from a laminar to a turbulent flow state.     

Electronic structures of Fe in La1−x Ba x FeO3−y (0≤x≤0.70)

Mössbauer spectra of La_1–x Ba _x FeO_3–y recorded at room temperature for various values of x show a six-line and/or a single-line subspectrum. The six-line subspectrum with IS=0.41 mm/s and H=52 T results from an orthorhombic perovskite containing only Fe³⁺ ions. The single-line subspectrum at 0.17 mm/s from a cubic perovskite can be assigned to neither Fe³⁺ nor Fe⁴⁺ but to an intermediate valence state, which may be due to electron hopping between the Fe³⁺ and Fe⁴⁺ ions on the identical octahedral sites. The temperature dependence of electron hopping in the compound La_0.40Ba_0.60FeO_3–y is presented.     

Matrix representation of three-dimensional astigmatic resonators

Three-dimensional astigmatic resonators, typical examples of which are the resonators bounded by cylindrical-spherical mirrors and cylindrical-cylindrical mirrors oriented at an arbitrary crossed angle, are investigated in detail by using a complex curvature tensor concept and generalized tensor ABCD law. Computerized numerical calculations illustrate some interesting characteristics of these astigmatic resonators.