磷酸酯类前药的合成方法与应用

磷酸酯类前药与原药相比,不仅能够提高药物靶向性、稳定性和生物利用度,减少药物毒副作用,还能掩蔽药物不适气味、提高水溶性从而改善给药途径。含羟基药物的磷酸酯化是该类药物前药设计的重要方法之一。本文根据中心磷原子的价态和化合物结构进行分类,综述了各种P(Ⅴ)四配位分子、P(Ⅲ)三配位分子和H-亚磷酸酯类化合物作为磷酸酯化试剂在磷酸酯类前药合成方法中的研究进展,并阐述了这些磷酸酯类药物的应用,最后总结了各类磷酸酯化试剂的优势与局限,并结合连续流反应技术应用案例展望了其发展趋势。     

热散焦效应对甲烷后向受激喇曼散射的影响

The conversion efficiency of stimulated Raman scattering (SRS) in CH4 is studied by using a single longitudinal mode second-harmonic Nd:YAG laser (532 nm, linewidth 0.003 cm-1, pulse-width (FWHM) 6.5 ns).Due to the heat release from vibrationally excited particles, SRS processes often suffer from the thermal defocusing effect (TDE). In view of 6.5 ns laser pulse width is much shorter than the vibrational relaxation time of CH4 molecules, TDE can only affect the SRS processes afterwards. In the cases of low laser repetition, TDE will be not serious, because it will be removed by the thermal diffusion in Raman medium before the next pulse arrives. At the laser repetition rate 2 Hz, CH4 pressure 1.1 MPa and pump laser energy 95 m J, the quantum conversion efficiency of backward first-Stokes (BS1) has attained 73%. This represents the highest first-stokes conversion efficiency in CH4. Furthermore, due to the relaxation oscillation, the BS1pulses are narrowed to about 1.2 ns. As a result, the BS1 peak power turns out to be 2.7 times that of the pump. Its beam quality is also much better and is only slightly affected by TDE. This reason is that BS1 represents a wave-front-reversed replica of the pump beam, which can compensate the thermal distortions in Raman amplify process. Under the same conditions, but pump laser repetition rate as 10 Hz, the conversion efficiency of BS1 goes down to 36% due to TDE. From this study, we expect that a well-behaved 630 nm Raman laser may be designed by using a closed CH4/He circulating-cooling system, which may have some important applications.     

二氧化钛对分相液滴自清洁釉的性能影响

采用长石、高岭土、石英为主要原料制备了分相液滴自清洁釉.利用扫描电镜、X射线衍射仪和显微镜接触角测量仪等测试仪器表征了样品性能.研究结果表明:当二氧化钛添加量为5wt;时,釉表面形成大量细小的孤立液滴,体积分数达58.48;,具有高的表面硬度(869.10 kg/mm2)和良好的亲水自清洁性(表面润湿角为13.361°).与现有的表面涂覆纳米涂料相比,该自清洁釉耐磨性强,制备方法简单,在中高温建筑陶瓷领域有着良好的应用前景,符合绿色环保理念.     

生晒参、全须生晒参中19种有机氯残留农药的毛细管气相色谱测定

建立了生晒参、全须生晒参中19种有机氯农药残留的毛细管气相色谱分析方法。对样品中六六六的4种异构体、滴滴涕的5种异构体、四氯苯胺、六氯苯、五氯硝基苯、七氯、五氯苯胺、艾氏剂、百菌清、环氧七氯、狄氏剂及异狄氏剂共19种有机氯农药的残留量进行了测定。以石油醚-丙酮混合物作为提取剂,样品采用索氏提取,提取液用弗罗里硅土柱层析净化。采用OV-1701石英毛细管气相色谱柱分离样品,ECD检测器进行检测。在3个水平添加时的回收率(n=5)分别为75.7%~96.1%、78.8%~111.6%和81.7%~115·2%;相对标准偏差分别为2.4%~10.6%、2.1%~9.8%和1.4~10.0%。方法用于生晒参和全须生晒参样品中农药残留的测定,结果满意。     

1.3 GHz超导腔磁通排出效应研究

设计并搭建了一套高精度的磁场测量和补偿系统,并结合中国科学院高能物理研究所(IHEP)的2K超导腔垂直测试平台对1.3 GHz单加速间隙超导腔的磁通排出效应开展了实验研究:利用研制的磁场测量和补偿系统能够精密地测量超导腔赤道位置磁场,并能够将磁场补偿至小于5.0×10-8 T;并对超导腔不同表面温度梯度下的磁通排出效应进行了测量分析;对钉扎了磁场的超导腔进行了射频性能测试,研究了超导腔电阻对磁通钉扎的敏感度,以及在不同电场梯度下超导腔的表面电阻变化情况。结果表明,研制的高精度磁场测量和补偿系统能够满足超导腔磁通排出研究的需求;高的超导腔表面温度梯度有利于磁通的排出;磁通钉扎电阻的敏感度随着加速电场梯度的增加而增大,导致超导腔的性能下降。此实验研究也为后续超导腔的研制奠定了一定基础。     

Accurate correction of arbitrary spin fermion quantum tunneling from non-stationary Kerr-de Sitter black hole based on corrected Lorentz dispersion relation

According to a corrected dispersion relation proposed in the study on the string theory and quantum gravity theory, the Rarita-Schwinger equation was precisely modified, which resulted in the Rarita-Schwinger-Hamilton-Jacobi equation. Using this equation, the characteristics of arbitrary spin fermion quantum tunneling radiation from non-stationary Kerr-de Sitter black holes were determined. A number of accurately corrected physical quantities, such as surface gravity, chemical potential, tunneling probability, and Hawking temperature, which describe the properties of black holes, were derived. This research has enriched the research methods and enabled increased precision in black hole physics research.     

中药微量元素含量区间尺最佳分级问题的探讨

在深入研究中药微量元素含量区间尺的基础上，从统计学角度对区间尺的最佳分级问题作了详细探讨，提出用5级区间尺来衡量中药中不同元素含量间相对高低水平，理论上更合理。     

流化床煤气化炉内脱硫的研究Ⅰ．台式流化床煤气化的炉内脱硫试验

采用台式流化床煤气化装置，研究了影响炉内脱硫效率的因素。炉内脱硫对高硫煤特别有效，脱硫效率可达９０％以上。所采用的二种石灰石和一种白云石脱硫效率相近，按Ｃａ／Ｓ比比较则白云石稍好些。虽然脱硫效率随Ｃａ／Ｓ比增加而增加，但当Ｃａ／Ｓ比达到３后几乎不再增加。存在一个最佳脱硫操作温度。在非焙烧区，脱硫率随压力增加而下降，而在焙烧区脱硫率和压力几乎无关。测定了脱硫剂脱硫前后的孔容积分布，发现脱硫之后１～３０ｎｍ的孔容显著减少。     

锂离子电池硅氧化物负极首次库伦效率的影响因素与提升策略

硅氧化物(SiO_x, 0<x≤2)具有高的比容量和低的嵌锂电位, 且体积膨胀率显著低于纯硅负极, 因而被认为是替代传统石墨负极材料的理想选择之一. 然而SiO_x负极在首次嵌锂过程中表面形成的固体电解质界面膜(SEI)以及大量的不可逆产物, 造成其首次库伦效率偏低, 严重阻碍了SiO_x负极的实际应用. 本文从SiO_x的结构模型出发, 系统阐述了SiO_x负极的嵌锂机理以及首次库伦效率低的原因; 归纳了SiO_x负极首次库伦效率的提升策略及其研究进展; 并对提升SiO_x负极首次库伦效率的未来发展方向进行了展望.     

纤维素纳米晶体手性复合材料:结构色的调控与应用

结构色在自然界中扮演了重要的角色,在昆虫外骨骼、鸟类羽毛以及植物果实中广泛分布.纤维素纳米晶体(CNCs)的水悬浮液达到一定浓度时会自组装形成左旋的手性向列液晶结构,这种手性向列结构在水分挥发后仍能保持并形成光子晶体虹彩薄膜,具有极强的手性和光子晶体的双重性质.膜内的周期性层状结构与光线产生干涉、衍射作用,表现出复杂的...