Solubility and Solution Thermodynamic Properties of 4-(4-Hydroxyphenyl)-2-butanone (Raspberry Ketone) in Different Pure Solvents

The solubility of 4-(4-hydroxyphenyl)-2-butanone (raspberry ketone) in six pure solvents was experimentally determined at temperatures ranging from 283.15 to 313.15 K under the pressure 0.10 MPa by employing a gravimetrical method. The experimental results indicate that the solubility of raspberry ketone in all studied solvents is temperature dependent, a rise in temperature brings about an increase in solubility. The experimental solubility data of raspberry ketone in six pure solvents (acetone, ethanol, ethyl acetate, n-propyl alcohol, n-butyl alcohol, and distilled water) was correlated by using several commonly used thermodynamic models, including the Apelblat, van’t Hoff and λh equations. The results of the error analysis indicate that the van’t Hoff equation was able to give more accurate and reliable predictions of solubility with root-mean-square deviation less than 0.56%. Furthermore, the changes of dissolution enthalpies (Δ_diss H°), dissolution entropies (Δ_diss S°) and dissolution Gibbs energies (Δ_diss G°) of raspberry ketone in the solvents studied were estimated by the van’t Hoff equation. The positive value of Δ_diss H°, Δ_diss S°, and Δ_diss G° indicated that these dissolution processes of raspberry ketone in the solvents studied were all endothermic and enthalpy-driven.     

Enhanced Enzymatic Synthesis of a Cephalosporin,Cefadroclor, in the Presence of Organic Co-solvents

In this study, we investigated the enzymatic synthesis of a semi-synthetic cephalosporin, cefadroclor, from 7-aminodesacetoxymethyl-3-chlorocephalosporanic acid (7-ACCA) and p-OH-phenylglycine methyl ester (D-HPGM) using immobilized penicillin G acylase (IPA) in organic co-solvents. Ethylene glycol (EG) was employed as a component of the reaction mixture to improve the yield of cefadroclor. EG was found to increase the yield of cefadroclor by 15–45%. An investigation of altered reaction parameters including type and concentration of organic solvents, pH of reaction media, reaction temperature, molar ratio of substrates, enzyme loading, and IPA recycling was carried out in the buffer mixture. The best result was a 76.5% conversion of 7-ACCA, which was obtained from the reaction containing 20% EG (v/v), D-HPGM to 7-ACCA molar ratio of 4:1 and pH 6.2, catalyzed by 16 IU mL^?1 IPA at 20 °C for 10 h. Under the optimum conditions, no significant loss of IPA activity was found after seven repeated reaction cycles. In addition, cefadroclor exhibited strong inhibitory activity against yeast, Bacillus subtilis NX-2, and Escherichia coli and weaker activity against Staphylococcus aureus and Pseudomonas aeruginosa. Cefadroclor is a potential antibiotic with activity against common pathogenic microorganisms.     

Photochemistry of benzene and quinoxaline fused Δ-1,2,3-triazolines and their trapping products

The benzene and quinoxaline fused Δ²-1,2,3-triazolines 1a and 1b were synthesized in good yields using Knoevenagel condensation and intramolecular 1,3-dipolar cycloaddition as two of the key reactions. Photolysis (254 nm) of Δ²-1,2,3-triazoline 1a or 1b in acetonitrile led to the homolytic cleavage of nitrogen that generated diethyl diazomalonate 7, highly reactive intermediates aziridines 8a,b, and isoindoles B. The latter two species subsequently underwent rearrangement to give the nitrogen extrusion products 9a,b, and polymers. Furthermore, the reactive intermediates were trapped by dienophiles to give the corresponding cycloadducts. Subsequent rearrangement of the N-bridged cycloadducts gave N-substituted pyrrolo[3,4-b]quinoxalines 12b and 15b in 6% and 9% yields, respectively. Irradiation of 1a in the presence of fumaronitrile led to the isolation of cycloadduct 16a with retention of stereochemistry. Thermal reaction of 1b gave more nitrogen extruded product 9b (58-63% yield) than that by photolysis (5-23% yield), which implied that zwitterionic intermediate might be involved in the former.     

Development of single‐drop microextraction and simultaneous derivatization followed by GC‐MS for the determination of aliphatic amines in tobacco

In this work, for the first time, headspace (HS) single‐drop microextraction and simultaneous derivatization followed by GC‐MS was developed to determine the aliphatic amines in tobacco samples. In the HS extraction procedure, the mixture of derivatization reagent and organic solvent was employed as the extraction solvent for HS single‐drop microextraction and in situ derivatization of aliphatic amine in the samples. Fast extraction and simultaneous derivatization of the analytes were performed in a single step, and the obtained derivatives in the microdrop extraction solvent were analyzed by GC‐MS. The optimized experiment conditions were: sample preparation temperature of 80°C and time of 30 min, HS extraction solvent (the mixture of benzyl alcohol and 2,3,4,5,6‐pentafluorobenzaldehyde) volume of 2.0 μL, extraction time of 90 s. With the optimal conditions, the method validations were also studied. The method has good linearity (R² more than 0.99), accepted precision (RSD less than 13%), good recovery (98–104%) and low limit of detection (0.11–0.97 μg/g). Finally, the proposed technique was successfully applied to the analyses of aliphatic amines in tobacco samples of seven different brands. It was further demonstrated that the proposed method offered a simple, low‐cost and reliable approach to determine aliphatic amines in tobacco samples.     

Efficient isolation and purification of five products from microbial biotransformation of cinobufagin by high‐speed counter‐current chromatography

An efficient separation method of using high‐speed counter‐current chromatography was successfully established to directly purify cytotoxic transformed products of cinobufagin by Cordyceps militaris. The two‐phase solvent system composed of n‐hexane–ethyl acetate–methanol–water (4:6:3:4, v/v) was used in high‐speed counter‐current chromatography. A total of 9 mg of 4β,12α‐dihydroxyl‐cinobufagin ( 1 ), 15 mg of 12β‐hydroxyl‐cinobufagin ( 2 ), 8 mg of 5β‐hydroxyl‐cinobufagin ( 3 ), 12 mg of deacetylcinobufagin ( 4 ) and 6 mg of 3‐keto‐cinobufagin ( 5 ) were obtained in a one‐step separation from 400 mg of the crude extract with purity of 98.7, 97.2, 90.6, 99.1 and 99.4%, respectively, as determined by HPLC. Their chemical structures were identified on the basis of ¹H‐NMR and ¹³C‐NMR technology. All products ( 1 – 5 ) showed the potent activities against human carcinoma cervicis (Hela) and malignant melanoma (A375) cells in vitro.     

880 nm laser-diode end-pumped Nd:YVO<Subscript>4</Subscript> slab laser at 1342 nm

43.6 W near-diffraction-limited continuous-wave laser beam at 1342 nm in 880 nm laser-diode partially end-pumped Nd:YVO₄ slab laser is presented. The slope efficiency and optical-to-optical efficiency with respect to absorbed pumping power were 45.4% and 35.9%, respectively. At output power of 34.5 W, the M ² factors in unstable and stable directions were 1.3 and 1.2, respectively.     

Effects of speaking style on speech intelligibility for Mandarin-speaking cochlear implant users

Cochlear implant (CI) users' speech understanding may be influenced by different speaking styles. In this study, speech recognition was measured in Mandarin-speaking CI and normal-hearing (NH) subjects for sentences produced according to four styles: slow, normal, fast, and whispered. CI subjects were tested using their clinical processors; NH subjects were tested while listening to a four-channel CI simulation. Performance gradually worsened with increasing speaking rate and was much poorer with whispered speech. CI performance was generally similar to NH performance with the four-channel simulation. Results suggest that some speaking styles, especially whispering, may negatively affect Mandarin-speaking CI users' speech understanding.     

Subdiffusion of a sticky particle on a surface

Conventional diffusion (ΔR2(t))=2Dt gives way to subdiffusion (ΔR2(t))～t(μ), 0<μ<1 when the waiting time distribution φ(τ) is nonintegrable. We have studied a model system, colloidal particles functionalized with DNA "sticky ends" diffusing on a complementary coated surface. We observe a crossover from subdiffusive to conventional behavior for (ΔR2(t)) and φ(τ) as temperature is increased near the particle-surface melting temperature consistent with a simple Gaussian distribution of sticky ends. Our results suggest that any system with randomness in its binding energy should exhibit subdiffusive behavior as it unbinds. This will strongly affect the kinetics of self-assembly.     

Output mode characteristics of an in-phase locked gain waveguide array CO2 laser

In this paper,experimental and theoretical studies of the output mode characteristics of an in-phase locked gain waveguide array CO 2 laser are reported.The experimental results of the optical oscillation mode frequency,the far-field intensity distribution and the burnt pattern of the sliced waveguide array laser are obtained.A revised mode expression of the rectangle waveguide,which is suited for this waveguide array CO 2 laser,is proposed.The theoretical simulation results based on the revised mode expression are shown to be in good agreement with the experimental results.