水解胶原蛋白热氧化及CaSO4形成机理探讨

水解胶原蛋白热氧化及CaSO4形成机理探讨;水解胶原蛋白; L-抗坏血酸; H2O2; 热氧化; CaSO4     

Flame retardant finishing of cotton fleece: part VII. Polycarboxylic acids with different numbers of functional group

In our previous research, multifunctional carboxylic acids have been used as flame retardants to reduce the flammability of cotton fleece so that the garment made of cotton fleece can pass the US mandatory requirement specified by the government regulation “Standard for the Flammability of Clothing Textiles” (16 CFR 1610). In this research, we studied and compared the effectiveness of the polycarboxylic acids having different numbers of carboxylic groups as the durable flame retardants for cotton fleece. The cotton fabrics were treated with 1,2,3,4-butanetetracarboxylic acid (BTCA), citric acid (CA), succinic acid (SUA) and malic acid (MLA). We compared the reactivity of those polycarboxylic acids to esterify cotton cellulose and their effectiveness to reduce the flammability of the cotton fleece. The data indicated that the polycarboxylic acids with higher functionalities (BTCA and CA) form more esterlinkages on cotton and are more durable to home launderings than that treated with their bifunctional counter parts (SUA and MLA, respectively). In addition, the cotton fabrics treated with BTCA and CA have higher dimensional stability and higher strength loss. All those differences can be attributed to the fact that only those acids with three or more carboxylic groups, i.e., BTCA and CA, are able to crosslink cotton cellulose whereas the bifunctional acids (SUA and MLA) only form single esterlinkage with cotton.     

Characterization and sequence identification of angiotensin II by a novel method involving ultra-fast liquid chromatography assay coupled with matrix-assisted laser desorption/ionization quadrupole ion trap time-of-flight five tandem mass spectrometry analysis

High-throughput proteomics aims to investigate dynamically changing proteins expressed by a full organism, specific tissue or cellular compartment under certain conditions. High-sensitivity mass spectrometry has gradually become a significant tool for characterizing peptides. Here, we analyzed angiotensin II using ultra-fast liquid chromatography (UFLC) coupled with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-ToF MS). First, we applied UFLC in isolating and collecting the angiotensin II, and then Axima-Resonance (MALDI-QIT-ToF MS(5)) was adopted, which enables collision-induced dissociation-MS(5) analysis for fine structural characterization of angiotensin II. Resultant MS, MS(2), MS(3) and MS(4) spectra of interested [M+H](+) ions selected as precursor ions yielded detailed information about the sites of fragmentation as well as the amino acid sequence for angiotensin II; meanwhile, the average deviation between theoretical mass and actually measured mass from MS to MS(5) spectra was only 0.32 Da. It indicated that Axima-Resonance was capable of analyzing the peptide sequence accurately and provide the corresponding fragmentation information thoroughly, thus suggesting a potential strategy involving UFLC assay coupled with MALDI-QIT-ToF MS(5) analysis on high-throughput proteomics study in future.     

Phosphorous,nitrogen, and molybdenum ternary co-doped TiO2: preparation and photocatalytic activities under visible light

P, N, and Mo ternary co-doped nano TiO₂ photocatalysts ((P, N, Mo)-TiO₂) were prepared by a single step sol–gel method, which show much enhanced photocatalytic activities over Mo-TiO₂, (P, N)-TiO₂, un-doped TiO₂ and Degussa P25 under visible light irradiation. The degradation rate of 0.72Mo–P-TiO₂ is as high as 65.3%, which is about 6.7 times of that of Degussa P25. Possible reasons for the improvement of photocatalytic activities were analyzed.     

Solvent Effects on the Structure-Activity Relationship of Phenytoin-like Anticonvulsant Drugs

The absorption spectra of nine compounds structurally related to phenytoin (5,5-diphenylhydantoin) were recorded in twelve solvents over the range of 200 to 400 nm. The effects of solvent dipolarity/polarizability and solvent/solute hydrogen bonding interactions were analyzed by means of the linear solvation energy relationship (LSER) concept proposed by Kamlet and Taft. The lipophilic activity of the investigated hydantoins was estimated by calculation of their log ₁₀ P values. The calculated values of log ₁₀ P were correlated with the ratio of the contributions of specific and non-specific solute/solvent interactions. The correlation equations were combined with the corresponding ED₅₀ values to generate new equations that demonstrate exact relationship between solute/solvent interactions and the structure-activity parameters.     

Fatty acid profile of <Emphasis Type="Italic">Trichosanthes kirilowii</Emphasis> Maxim. seed oil

Fatty acid profile data for refined cold-pressed Trichosanthes kirilowii Maxim. seed oil, in comparison to other commercially available oils — olive, rapeseed and camellia, are presented. Trichosanthes kirilowii Maxim. seed oil has high oleic and linoleic acid content and high polyunsaturated acid content. Squalene elutes as a distinct peak in the GC chromatograph. For a positive identification, MS detection was used. In the samples analyzed, squalene occurred in the range of 57.4–68.2 mg g⁻¹.     

Synthesis,characterization, and anti-tumor activities of some transition metal(II) complexes with podophyllic acid hydrazide

Four transition metal(II) complexes with podophyllic acid hydrazide (HL) were prepared and characterized by elemental analysis, complexometric titration, thermal analysis, conductivity, IR, and ¹H NMR. The complexes have the general formula ML₂ · nH₂O, where M = Zn, Cu, Co, and Ni, n = 2 or 0. Anti-tumor activities of podophyllotoxin, HL, ZnL₂ · ₂H₂O, and NiL₂ were tested by both the MTT and the SRB method. The results show that the activities of the complexes against the tumor cells tested are superior to HL and the anti-tumor activity of NiL2 is even similar to that of podophyllotoxin.     

The reaction force. A scalar property to characterize reaction mechanisms

The reaction force is a global property of a chemical reaction that arises when applying the Hellmann–Feynmann theorem to the potential energy surface that links reactants, products and transition states. In the present work, the reaction force is defined rigorously from the cartesian components coming out from all forces exerted over each atom of a molecular system during the chemical reaction; it is demonstrated that the reaction force is a scalar property. An erratum to this article can be found at     

Synthesis of dihydroxyurea and its application to the U/Pu split in the PUREX process

Dihydroxyurea (DHU) was synthesized using tri-associated solid phosgene [bis(trichloromethyl) carbonate] dissolved in dioxane and hydroxylamine hydrochloride dissolved in potassium acetate solution. The reduction of Pu(IV) by DHU was investigated using UV-Vis spectrophotometry. The reduction back-extraction behavior of Pu(IV) in 30% tri-butyl phosphate/kerosene was firstly investigated under conditions of various temperature, various DHU and HNO₃ concentrations and various phase contact times. The results showed that Pu(IV) in the organic phase can be stripped rapidly to the aqueous phase by DHU. Simulating the 1B contactor of the PUREX process using a 0.1 M DHU in 0.36M nitric acid solution as the stripping agent, the separation factors of uranium/plutonium can reach 2.1·10⁴. This indicates that DHU is a promising salt free agent for uranium/plutonium separation.     

Performance of a photocatalytic hybrid system coupled with a stainless steel membrane for removal of humic acid

The objective of this study was to evaluate the performance of a photocatalysis/H₂O₂/metal membrane hybrid system in the degradation of humic acid. A metal membrane of nominal pore size 0.5 μm was used in the experiment for separation of TiO₂ particles. Hydrogen peroxide was tested as an oxidant. The efficiency of removal of COD_Cr and color increased rapidly for initial hydrogen peroxide concentrations up to 50 mg L⁻¹. The efficiency of removal of COD_Cr and color by 50 mg L⁻¹ initial hydrogen peroxide concentration was approximately 95 and 98%, respectively. However, addition of hydrogen peroxide over 50 mg L⁻¹ inhibited the efficiency of the system. Addition of hydrogen peroxide to a UV/TiO₂ system enhanced efficiency of removal of COD_Cr and color compared with no addition of hydrogen peroxide. This may be ascribed to capture electrons ejected from TiO₂ and to the production of OH radicals. Application of the metal membrane in the UV/TiO₂/H₂O₂ system enhanced the efficiency of removal of COD_Cr and color because of adsorption by the metal membrane surface and the production of OH radicals. By application of a metal membrane with a nominal pore size of 0.5 μm, TiO₂ particles were effectively separated from the treated water by metal membrane rejection. The photocatalytic metal membrane had much less resistance than the humic acid, TiO₂, and humic acid/TiO₂ because of the degradation of humic acid by the photocatalytic reaction.