Microstructure effect on microtopography of chemically etched α + β Ti alloys

Microstructure effect on chemical etching behavior of the annealed Ti-6Al-4V and Ti-3Al-2.5V titanium (Ti) alloys was compared with that of unalloyed commercially pure titanium. The microstructural evolution of structure phases after annealing the titanium and its alloys at temperature near and above β transus and followed by furnace cooling to room temperature was studied using optical microscope, scanning electron microscope and X-ray diffraction techniques. The microstructure study illustrates that the heat treatment enhanced partitioning effect allows extensive formation of hemispherical and near spherical pits roughened surface to be readily acquired by chemically etching the annealed α + β titanium alloys. The kinetics of the chemical etching reaction process show a linear dependence on time. The annealed α + β titanium alloys that exhibit relatively lower weight loss and thickness reduction rate illustrate less chemical activity than the annealed unalloyed titanium.     

Magnetic configurations of hybrid ferromagnetic dot–superconductor systems

In-plane single domain and vortex magnetization configurations of the magnetic dot in the hybrid superconductor–ferromagnet system are considered. Single domain configuration energy shift due to the presence of superconductor is calculated. The change of the phase curve of the ferromagnetic dot magnetization due to the repulsion of the magnetic field by the superconductor is obtained. Up to the two-fold decrease of the ferromagnetic dot critical radius due to the presence of the superconductor is predicted.     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Magnetic and electrical transport properties of delta-doped amorphous Ge:Mn magnetic semiconductors

We report on the growth and characterization of delta-doped amorphous Ge:Mn diluted magnetic semiconductor thin films on GaAs (0 0 1) substrates. The fabricated samples exhibit different magnetic behaviors, depending on the Mn doping concentration. The Curie temperature was found to be dependent on both the Mn doping concentration and spacing between the doping layers. A sharp drop in magnetization and rise in resistivity are observed at low temperature in samples with high Mn doping concentrations, which is also accompanied by a negative thermal remanent magnetization (TRM) in the higher temperature range. The temperature at which the magnetization starts to drop and the negative TRM appears show a correlation with the Mn doping concentration. The experimental results are discussed based on the formation of ferromagnetic regions at high temperature and antiferromagnetic coupling between these regions at low temperature.     

Properties of<Emphasis Type="Italic">B</Emphasis><Subscript>c</Subscript> meson

The mass spectrum ofcb meson is investigated with an effective quark-antiquark potential of the form -α_c/r +Ar ^νwith ν varying from 0.5 to 2.0. TheS andP-wave masses, pseudoscalar decay constant, weak decay partial widths in spectator model and the lifetime ofB _cmeson are computed. The properties calculated here are found to be in good agreement with other theoretical and experimental values at potential index,ν = 1     

A New View on Fuzzy Hypermodules

We describe the relationship between the fuzzy sets and the algebraic hyperstructures. In fact, this paper is a continuation of the ideas presented by Davvaz in （Fuzzy Sets Syst., 117： 477- 484, 2001） and Bhakat and Das in （Fuzzy Sets Syst., 80： 359-368, 1996）. The concept of the quasicoincidence of a fuzzy interval value with an interval-valued fuzzy set is introduced and this is a natural generalization of the quasi-coincidence of a fuzzy point in fuzzy sets. By using this new idea, the concept of interval-valued （α,β）-fuzzy sub-hypermodules of a hypermodule is defined. This newly defined interval-valued （α,β）-fuzzy sub-hypermodule is a We shall study such fuzzy sub-hypermodules and sub-hypermodules of a hypermodule. generalization of the usual fuzzy sub-hypermodule. consider the implication-based interval-valued fuzzy     

Impact of photodepletion to amplified spontaneous emission of proton-transfer dyes in polymeric matrices

A six level rate equation system was used to investigate the impact of photodepletion to amplified spontaneous emission (ASE) of intramolecular proton-transfer (IPT) dyes incorporated into polymeric hosts. The model includes the most important transitions for the normal and tautomer form of the molecule as well as intersystem crossing and triplet–triplet transitions. The experimentally observed pulse shape as well as photodepletion phenomena, i.e. a first order exponential decay of the ASE intensity and a shortening in ASE pulse width, have been simulated successfully. Additionally, the model was used to propose an explanation of the unexpected high photodepletion of proton-transfer dyes in solids. The results show that the emission cross section and reabsorption cross section of the tautomer form of the molecule are the most important parameter not only for efficiency but also for photodepletion. The model was tested by comparison with experimental results of 2-(2’-hydroxyphenyl)benzimidazole in polymethylmethacrylate (PMMA), polystyrene (PS) and a 1:1 alternating copolymer matrix PS-co-PMMA. PACS 78.45.th; 42.55.Mv; 42.70.Jk     

New Non-Linear Inequalities for Flag-Vectors of 4-Polytopes

In this paper we prove four new (infinite) lists of quadratic inequalities, and four cubic inequalities, for the flag f-vectors of 4-polytopes. These extend and supplement the only four currently known non-linear inequalities, which were proved by Bayer in 1987. The new lists of inequalities for flag f-vectors yield new lists of inequalities for f-vectors of 4-polytopes. Using the latter, we managed to improve an estimate discovered by Hoppner and Ziegler concerning upper bounds of f₁ in terms of f₀ and f₃.     

Recent changes in A-level Mathematics: is the availability and uptake of mechanics declining yet more?

In the past 6 years changes have occurred in GCE A-levels. Inparticular, there have been several major changes in A-levelMathematics courses. As engineering students are usually requiredto have studied A-level Mathematics, or its equivalent, thesechanges have had an effect on their prior mathematical knowledge.Moreover, engineering students traditionally obtained a goodgrounding in mechanics as part of their A-level Mathematicsqualification. However, mechanics, which was once included inthe core syllabus, is now optional. This article investigatesthe current availability and uptake of mechanics modules withinA-level Mathematics courses in schools. Comparisons are drawnbetween these results and results of a survey of schools in2004 and surveys of first year engineering students conductedin 2004 and 2005. It is found that there is a decline in theavailability of mechanics modules and the uptake of more thanone mechanics module has also decreased. The implications ofthese findings for engineering educators are discussed.     

Sulfonierte ?le

Ohne Zusammenfassung