Preparation and electrical characterization of (PVC + KBrO3) polymer electrolytes for solid state battery applications

This paper presents results of studies on dc electrical conductivity and transference number measurements on potassium bromate (KBrO₃) complexed polyvinyl chloride (PVC) films prepared by solution cast technique. Temperature dependence of dc electrical conductivity and transference number data indicated the dominance of ion type charge transport in these specimens. The magnitude of conductivity increased with increase in concentration of the salt and temperature. Using this (PVC + KBrO₃) electrolyte, solid-state electrochemical cells were fabricated, and their discharge profiles were studied under a constant load of 100 kΩ. Several cell profiles such as open circuit voltage, short circuit current, power density, and energy density associated with these cells were evaluated and were reported. The features of complexation of the electrolytes were studied by X-ray diffraction and Fourier transform infrared spectroscopy. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

随机环境中多物种分枝随机游动

引进了随机环境中多物种分枝随机游动的一般模型.在分枝过程非灭绝的情况下,讨论了系统的状态分类,得到了系统暂留及强常返的充要条件是存在k个定义在整数集上的函数分别满足某种性质.最后给出了系统强暂留的充分条件.     

The Discounted Limit Theorems

The large deviation theorems, exponential inequalities and a non-uniform estimate of the Berry–Esséen theorem in a discounted version are proved.Dedicated to Professor Vytautas Statulevičius on the occasion of his 75th birthday.     

State of the art of color interferometry at ONERA

At ONERA-Lille center a lot of studies have been conducted to characterize complex flows using an optical method based on differential interferometry with Wollaston prism and white polarized light source. Several applications are presented in two-dimensional and axisymmetric flows and in a gaseous mixture where the two gases interface is submitted to acceleration. Then, real-time color holographic interferometry (RCHI) has been developed to obtain the refractive index itself in two dimensional wake flow. The last improvements concern the extension of this method for analyzing three dimensional flows. The authors present a specific setup defined in a single sight direction, the aim being to reproduce the same optical setup along several sight directions, each shifted by a given angle. This optical technique uses reflection holograms where the diffraction efficiency of plates is strongly influenced by the variations in the gelatin thickness produced during the holograms treatment. Problems are discussed and solutions are proposed to control the gelatin shrinkage for two different types of used holograms. The results obtained in a one sight direction make it possible to build in the future an optical setup allowing several simultaneous line-of-sight optical measurements.     

Bimodal fission in binary and ternary spontaneous fission of 252Cf

The hot bimodal fission of ²⁵²Cf is reexamined with new high-statistics data. We constructed a γ-γ-γ coincidence cube for binary fission and LCP-gated γ-γ matrix for ternary fission. By identifying the secondary fission fragments from their γ-ray transitions, we measured the yields for various fission splits. The normal neutron yield distribution is found to be Gaussian for Xe-Ru. However, the binary fission split of Ba-Mo is found to exhibit a bimodal neutron distribution with the “hot mode” corresponding to ≈3.1% of the total yield. In α ternary fission, the first measurements of yields for specific fission splits are presented. The Te-α-Ru and Xe-α-Mo neutron yields fit well with a single mode, but the Ba-α-Zr split shows evidence for an enhanced hot mode with an intensity of ≈13.8% of the normal mode. The text was submitted by the authors in English.     

Effect of electrochemically synthesized polymethylolamide coatings on the corrosion resistance of steel in seawater

The effect of coatings based on a copolymer of acrylamide, N,N′-methylenebisaxcrylamide and formaldehyde deposited by electrochemical polymerization on the corrosion resistance of 08Kh18N10T stainless steel (field studies at sea) and low-carbon steel (laboratory experiments) was examined.     

Finding the best visualization of an ontology

An ontology is a classification model for a given domain. In information retrieval, ontologies are used to perform broad searches. An ontology can be visualized as nodes and edges. Each node represents an element and each edge a relation between a parent and a child element. Working with an ontology becomes easier with a visual representation. An idea is to use the expressive power of 3D representation to provide visualization for the user. In this paper, we propose a new method for positioning the elements of the visualized concept lattice in the 3D world based on operations research (OR) methods. One method uses a discrete location model to create an initial solution and we propose heuristic methods to further improve the visual result. We evaluate the visual results according to our success criteria and the feedback from users. Running times of the heuristic indicate that an improved version should be feasible for on-line processing and what-if analysis of ontologies.     

Nanostructure characterization of high k materials by spectroscopic ellipsometry

In this work, the optical and structural properties of high k materials such as tantalum oxide and titanium oxide were studied by spectroscopic ellipsometry, where a Tauc-Lorentz dispersion model based in one (amorphous films) or two oscillators (microcrystalline films) was used. The samples were deposited at room temperature by radio frequency magnetron sputtering and then annealed at temperatures from 100 to 500 °C. Concerning the tantalum oxide films, the increase of the annealing temperature, up to 500 °C does not change the amorphous nature of the films, increasing, however, their density. The same does not happen with the titanium oxide films that are microcrystalline, even when deposited at room temperature. Data concerning the use of a four-layer model based on one and two Tauc-Lorentz dispersions is also discussed, emphasizing its use for the detection of an amorphous incubation layer, normally present on microcrystalline films grown by sputtering.     

Calorimetric studies of the growth of Desulfovibrio desulfuricans in the presence of nitrocellulose

Calorimetric results indicate that nitrocellulose (NC)-induced changes in the metabolism of Desulfovibrio desulfuricans 1388 are caused by both chemical (nitrate) and physical (biofilm formation) factors. Nitrate added to lactate-based culture medium with nitrocellulose competed for the electron flux from lactate and suppressed the bacterial sulfidogenesis and growth. The presence of an insoluble compound (carbon backbone of the polymer) induced the creation of a biofilm-like structure with its own metabolism.     

Influence of oxidation time on semiconductive behaviour of thermally grown oxide films on AISI 304L

The oxide films formed on AISI 304L stainless steel at 300 °C in the oxidation time range between 2 and 4 h have been studied by photoelectrochemistry. Photocurrents were investigated as a function of the wavelength of the incident light and the electrode potential. The investigation allowed the determination of the semiconductive properties of the oxides. The oxide films showed n-type behaviour. A duplex structure of the oxide films has been suggested on the basis of the photocurrent spectra, with an internal oxide layer having an optical gap (E_g2 = 2.16-2.3 eV) depending on the applied potential and oxidation time, higher to that of the external oxide layer (E_g1 ≈ 1.9 eV). Significant variations in the amplitude of the photocurrent were detected as a function of the applied potential and the oxidation time.